Streszczenie treści zawartej na stronie nr. 1
s
AC75
Siemens Cellular Engine
Version: 01.002
DocId: AC75_ATC_V01.002
AT Command Set
Streszczenie treści zawartej na stronie nr. 2
AC75 AT Command Set s Document Name: AC75 AT Command Set Version: 01.002 Date: October 30, 2006 DocId: AC75_ATC_V01.002 Status Confidential / Released General Notes Product is deemed accepted by recipient and is provided without interface to recipient’s products. The documen- tation and/or product are provided for testing, evaluation, integration and information purposes. The documen- tation and/or product are provided on an “as is” basis only and may contain deficiencies or inadequaci
Streszczenie treści zawartej na stronie nr. 3
AC75 AT Command Set s Contents Contents 1. Introduction............................................................................................................................................ 14 1.1 Scope of the document ................................................................................................................. 14 1.2 Related documents ....................................................................................................................... 15 1.3 Docume
Streszczenie treści zawartej na stronie nr. 4
AC75 AT Command Set s Contents 3.3 AT^SIND Extended Indicator Control.......................................................................................... 85 3.4 AT+CEER Extended Error Report............................................................................................... 92 3.4.1 Cause Location ID for the extended error report ........................................................... 93 3.4.2 SIEMENS L2 cause ..............................................................
Streszczenie treści zawartej na stronie nr. 5
AC75 AT Command Set s Contents 6.4 AT+CGMM Request model identification .................................................................................. 152 6.5 AT+GMM Request model identification..................................................................................... 152 6.6 AT+CGMR Request revision identification of software status................................................... 153 6.7 AT+GMR Request revision identification of software status .............................
Streszczenie treści zawartej na stronie nr. 6
AC75 AT Command Set s Contents 8.9.1 AT^MONI responses.................................................................................................... 211 8.9.2 Service states .............................................................................................................. 212 8.10 AT^MONP Monitor neighbour cells ........................................................................................... 213 8.10.1 AT^MONP responses ............................................
Streszczenie treści zawartej na stronie nr. 7
AC75 AT Command Set s Contents 10.13.1 Information Elements Related to the Service Application............................................ 295 10.13.2 Information Elements Related to FTP Service............................................................. 296 10.13.3 Information Elements Related to HTTP Service .......................................................... 297 10.13.4 Information Elements Related to POP3 Service.......................................................... 297 10.13.
Streszczenie treści zawartej na stronie nr. 8
AC75 AT Command Set s Contents 12.1.1 Fax Result Codes ........................................................................................................ 352 12.2 AT+FCLASS Fax: Select, read or test service class................................................................. 353 12.3 AT+FRH Receive Data Using HDLC Framing .......................................................................... 354 12.4 AT+FRM Receive Data .............................................................
Streszczenie treści zawartej na stronie nr. 9
AC75 AT Command Set s Contents 15. Remote SIM Access (RSA) Commands.............................................................................................415 15.1 AT^SRSA Remote SIM Access Activation ................................................................................ 418 15.2 AT^SRSM Remote SIM Access Message ................................................................................ 422 15.2.1 SAP Request Message Parameters ............................................
Streszczenie treści zawartej na stronie nr. 10
AC75 AT Command Set s Contents 19. Hardware Related Commands............................................................................................................ 481 19.1 AT+CCLK Real Time Clock....................................................................................................... 481 19.2 AT+CALA Set alarm time ......................................................................................................... 482 19.3 AT^SAD Antenna Diagnosis ....................
Streszczenie treści zawartej na stronie nr. 11
AC75 AT Command Set s Contents 23.3 Available AT Commands and Dependency on SIM PIN ............................................................. 539 23.4 Availability of AT Commands Depending on Operating Mode of ME.......................................... 546 23.5 AT Command Settings storable with AT&W................................................................................ 554 23.6 Factory Default Settings Restorable with AT&F........................................................
Streszczenie treści zawartej na stronie nr. 12
AC75 AT Command Set s List of Tables List of Tables Table 1.1: Symbols used to mark the type of parameters ...........................................................................17 Table 1.2: Symbols used to indicate the correlations with other commands............................................... 17 Table 1.3: Symbols used to mark different types of default values of parameters .....................................17 Table 1.4: Types of AT commands and responses ........................
Streszczenie treści zawartej na stronie nr. 13
AC75 AT Command Set s List of Figures List of Figures Figure 1.1: Main character table of GSM 03.38 alphabet ............................................................................. 22 Figure 1.2: Extension character table of GSM 03.38 alphabet ..................................................................... 23 Figure 15.1: Basic Remote SIM Access Usage Scenario via Bluetooth....................................................... 415 Figure 15.2: Basic Remote SIM Access usage scenari
Streszczenie treści zawartej na stronie nr. 14
AC75 AT Command Set s 1. Introduction 1. Introduction 1.1 Scope of the document This document presents the AT Command Set for the Siemens Cellular Engine AC75 Release 01.002. Before using the Cellular Engine or upgrading to a new firmware version please read the latest product informa- tion provided in the Release Notes [1]. More information is available at the Siemens Website: http://www.siemens.com/wm. AC75_ATC_V01.002 Page 14 of 569 10/30/06 Confidential / Released
Streszczenie treści zawartej na stronie nr. 15
AC75 AT Command Set s 1.2 Related documents 1.2 Related documents [1] AC75 Release Notes, Version 01.002 [2] AC75 Hardware Interface Description, Version 01.002 [3] AC75 Java User's Guide [4] Remote-SAT User's Guide [5] GPRS Startup User's Guide [6] Multiplexer User's Guide [7] Multiplex Driver Developer's Guide for Windows 2000 and Windows XP [8] Multiplex Driver Installation Guide for Windows 2000 and Windows XP [9] Application Note 02: Audio Interface Design [10] Application Note 16: Updati
Streszczenie treści zawartej na stronie nr. 16
AC75 AT Command Set s 1.3 Document conventions 1.3 Document conventions Throughout the document, the GSM engines are referred to as ME (Mobile Equipment), MS (Mobile Station), TA (Terminal Adapter), DCE (Data Communication Equipment) or facsimile DCE (FAX modem, FAX board). To control your GSM engine you can simply send AT Commands via its serial interface. The controlling device at the other end of the serial line is referred to as TE (Terminal Equipment), DTE (Data Terminal Equipment) or pl
Streszczenie treści zawartej na stronie nr. 17
AC75 AT Command Set s 1.3 Document conventions 1.3.2 Superscript notation for parameters and values Table 1.1: Symbols used to mark the type of parameters Parameter type Meaning (num) Parameter value must be numeric type (str) Parameter value must be string type Table 1.2: Symbols used to indicate the correlations with other commands Parameter option Meaning (&W) Parameter value will be stored with AT&W (&V) Parameter value will be displayed with AT&V (ˆSNFW)
Streszczenie treści zawartej na stronie nr. 18
AC75 AT Command Set s 1.4 AT Command Syntax 1.4 AT Command Syntax The "AT" or "at" prefix must be set at the beginning of each command line. To terminate a command line enter . Commands are usually followed by a response that includes "". Through- out this document, only the responses are presented, are omitted intentionally. Table 1.4: Types of AT commands and responses AT command type Syntax Function Test command AT+CXXX=? The mobile equipment returns
Streszczenie treści zawartej na stronie nr. 19
AC75 AT Command Set s 1.4 AT Command Syntax 1.4.2 Combining AT commands on the same command line You may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefix before each command. Instead, it is only needed once at the beginning of the command line. Use a semicolon as command delimiter. The table below lists the AT commands you cannot enter together with other commands on the same line. Oth- erwise, the responses may not be in the expected order.
Streszczenie treści zawartej na stronie nr. 20
AC75 AT Command Set s 1.5 Supported character sets 1.5 Supported character sets The ME supports two character sets: GSM 03.38 (7 bit, also referred to as GSM alphabet or SMS alphabet) and UCS2 (16 bit, refer to ISO/IEC 10646). See AT+CSCS for information about selecting the character set. Character tables can be found below. Explanation of terms • International Reference Alphabet (IRA) IRA means that one byte is displayed as two characters in hexadecimal format. For example, the byte 0x36 (d
