Streszczenie treści zawartej na stronie nr. 1
Owner's Manual
IERRFTSMRN'I
10 in. COMPOUND MITER SAW
Double Insulated
Model No.
315.212130
Save this manual for
future reference
• Safety
• Features
_IL CAUTION: Read and follow
all Safety Rules and Operating
• Adjustments
Instructions before first use of
• Operation
this product.
• Maintenance
Customer Help Line: 1-800-932-3188
• Parts List
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
0( us
972000-905
9-01
Streszczenie treści zawartej na stronie nr. 2
• Table of Contents .............................................................................................................................................. 2 • Warranty and Introduction ........ ......................................................................................................................... 2 • Rules For Safe Operation ............................................................................................................................. 3-6 • Glossary ......
Streszczenie treści zawartej na stronie nr. 3
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety wamings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: A Indicates danger, waming or caution. May be used in conjunction with other symbols or picto- graphs. DANGER: Failure t
Streszczenie treści zawartej na stronie nr. 4
RULES FOR SAFE OPERATION (Continued) • USE THE PROPER EXTENSION CORD. Make moving parts, breakage of parts, saw stability, mount- sure your extension cord is in good condition. ing and any other conditions that may affect its Use only a cord heavy enough to carry the operation. A damaged part must be propedy current your product will draw. An undersized repaired or replaced or replaced by a qualified cord will cause a drop in line voltage resulting in service techmc_an at a Sears store or repair
Streszczenie treści zawartej na stronie nr. 5
RULES FOR SAFE OPERATION (Continued) l BEFORE MAKING A CUT, be sure all adjust- ALWAYS release the power switch and allow the ments are secure. saw blade to stop rotating before raising it out of the workpiece. BE SURE BLADE PATH IS FREE OF NAILS. DO NOT TURN THE MOTOR SWITCH ON AND Inspect for and remove all nails from lumber OFF RAPIDLY. This could cause the saw blade before cutting. to loosen and could create a hazard. Should this ALWAYS USE A CLAMP to secure the work- ever occur, stand clear
Streszczenie treści zawartej na stronie nr. 6
RULES FOR SAFE OPERATION (Continued) ALWAYS TURN OFF THE SAW before discon- _ WARNING: Some dust created by power necting it to avoid accidental starting when sanding, sawing, grinding, drilling, and other reconnecting to power supply. NEVER leave the construction activities contains chemicals known saw unattended while connected to a power to cause cancer, birth defects or other reproduc- source. tive harm. Some examples of these chemicals are: NEVER lift this tool by gripping the sliding miter
Streszczenie treści zawartej na stronie nr. 7
BladeDiameter 10in. Cutting Capacity with Miter at 0°/Bevel 0°: Blade Arbor 518 in. 5-7/16 in. wide x 2-9/16 in. thick 3-1/2 in. thick x 4 in. wide No Load Speed 5000 RPM Maximum Cutting Capacity with Miter at 45°/Bevel 0°: Rating 120 Volts, 60Hz-AC Only 3-7/8 in. wide x 2-9/16 in. thick Input 15 Amperes Maximum Cutting Capacity with Miter at 0°/Bevel 45°: Net Weight 32 Ibs. 5-7/16 in. wide x 1-9/16 in. thick Maximum Cutting Capacity with Miter at 45°/Bevel 45°: 3-7/8 in. wide x 1-1/2 in. thick
Streszczenie treści zawartej na stronie nr. 8
The following labels are on the miter saw with locations indicated. andsecurelytightenscrew I Restorelower bladeguard before use CUlt for Blade Change. See DANGER: DO NOT REMOVE ANY GUARD, USE OF SAW WITHOUT THIS GUARD WILL RESULT IN SERIOUS INJURY. A WARNING / ADVERTENCIA • For your safety, road owner's manual before operating miter saw. • Wear eye protection. • Keep hands out of path of saw blade. • Do not operate saw without guards in place. • Do not perform any operation freehand. • Never ro
Streszczenie treści zawartej na stronie nr. 9
The following items are included with your Compound Miter Saw: Saw Blade - 10 in. • 6 mm Hex Key Wrench Miter Lock Handle : 8 mm Hex Key Wrench Dust Guide Hex Key Bolt Blade Wrench • Owner's Manual 5 mm Hex Key Wrench SAWBLADE BLADEWRENCH 8 mmHEX KEY 6 mmHEX KEY (b b DUSTGUIDE k 5 mmHEX KEY MITERLOCKHANDLE Fig. 2 _1= WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious personal injury. The following tools (not included) are needed for checking adju
Streszczenie treści zawartej na stronie nr. 10
CUTTING CAPACITIES KNOW YOUR COMPOUND MITER SAW See Figure 3. When the miter angle (miter table) is set at O° and the bevel angle Is set at O°: Before attempting to use your saw, familiarize yourself with all operating features and safety requirements. Your saw will cut materials up to a maximum of 5-7/16 in. wide x 2-9/16 in. thick. _1, WARNING: Do not allow familiarity with your It will cut materials up to a maximum thickness of saw to make you careless. Remember that a 3-1/2 in. thick x 4 in.
Streszczenie treści zawartej na stronie nr. 11
SPINDLE LOCK BUTTON CARRYING HANDLE See Figure 4. See Figure 5. For convenience when carrying or transporting your A spindle lock button has been provided for locking miter saw from one place to another, a carrying the spindle which keeps the blade in your saw from handle has been provided on top of the saw arm as rotating. Depress and hold the lock button while shown in figure 4. To transport, turn off and unplug installing, changing, or removing blade only. your saw, then lower the saw arm and
Streszczenie treści zawartej na stronie nr. 12
_w POSITIVE STOPS ON MITER TABLE 173/16" Positive stops have been provided at 0°, 22-1/2 ° and 45°. The 22-1/2 ° and 45 ° positive stops have been provided on both the left and right side of the miter l table. BEVEL LOCK KNOB The bevel lock knob securely locks your compound 103/16" miter saw at desired bevel angles. Positive stop adjustment screws have been provided on each side of the saw arm. These adjustment screws are for ___ 7tt6"DIAHOLE making fine adjustments at 0° and 45°. See pages 17 a
Streszczenie treści zawartej na stronie nr. 13
TO INSTALL BLADE _, WARNING: To prevent accidental starting that could cause possible serious personal injury, See Figures 10, 11, and 12. assemble all parts to your saw before connecting it to power supply. Saw should never be WARNING: A 10 in. blade is the maximum A connected to power supply when you are blade capacity of your saw. Never use a blade assembling parts, making adjustments, installing that is too thick to allow outer blade washer to or removing blades, or when not in use. engage w
Streszczenie treści zawartej na stronie nr. 14
LOWER PHILLIPS • Fit saw blade inside lower blade guard and onto BLADE GUARD SCREW spindle. The blade teeth point downward at the front of saw as shown in figure 11. CAUTION: Always install the blade with the A blade teeth and the arrow printed on the side of the blade pointing down at the front of the saw. The direction of blade rotation is also stamped with an arrow on the upper blade guard. BLADE BOLTCOVER • Replace outer blade washer. The double "D" flats FLAT(S) on the blade washers align w
Streszczenie treści zawartej na stronie nr. 15
MITERFENCE Note: Many of the illustrations in this manual show only portions of your compound miter saw. This is MITERTABLE intentional so that we can clearly show points being made in the illustrations. Never operate your saw without all guards securely in place and in good operating condition. SQUARING THE MITER TABLE TO THE FENCE See Figures 13 - 16. • Unplug your saw. _i, WARNING: Failure to unplug your saw could FRAMING ZEROCLEARANCE result in accidental starting causing possible SQUARE THR
Streszczenie treści zawartej na stronie nr. 16
SQUARING THE SAW BLADE TO THE • Retighten the screws securely and recheck the blade-to-fence alignment. FENCE See Figures 17 - 20. MITER FENCE • Unplug your saw. X _k WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury. Pull the saw arm all the way down and engage the lock pin to hold the saw arm in transport position. Loosen the miter lock handle approximately one-half turn. Depress the miter lock plate and rotate the miter MITER FRAM
Streszczenie treści zawartej na stronie nr. 17
SQUARING THE BLADE TO THE • If the top or bottom of the saw blade angles away MITER TABLE from the square as shown in figures 22 and 23, adjustments are needed. See Figures 21 - 24. • Unplug your saw. MITER FENCE ,_ WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury. Pull the saw arm all the way down and engage the lock pin to hold the saw arm in transport position. Loosen the miter lock handle approximately one- half turn. BLADE Depr
Streszczenie treści zawartej na stronie nr. 18
TRAVEL PIVOT ADJUSTMENT The saw arm should rise completely to the up position by itself. If the saw arm does not raise by itself or if there is play in the pivot joints, have saw repaired by a qualified service technician at your nearest Sears store or repair center to avoid risk of personal injury. POSITIVESTOP BEVEL PIVOT ADJUSTMENT ADJUSTMENT SCREWFOR • Your compound miter saw should bevel easily by loosening the bevel lock knob and tilting the saw arm to the left. If movement is tight or if
Streszczenie treści zawartej na stronie nr. 19
DEPTHSTOP _h, WARNING: Before starting any cutting ADJUSTMENT operation, clamp or bolt your compound miter SCREW saw to a workbench. Never operate your miter saw on the floor or in a crouched position. Failure to heed this warning can result in serious ) personal injury. BEVEL CUTTING WITH YOUR COMPOUND MITER SAW WARNING: When using a work clamp or TABLE A C-clamp to secure your workpiece, clamp workpiece on one side of the blade only. The workpiece must remain free on one side of the blade to p
Streszczenie treści zawartej na stronie nr. 20
Slowly lower the blade into and through the workpiece. See Figure 26. Release the switch trigger and allow the saw STRAIGHT blade to stop rotating before raising the blade out CROSSCUT of workpiece. Wait until the electric brake stops blade from turning before removing the workpiece from the miter table. BEVEL CUT See Figures 27 and 28. A bevel cut is made by cutting across the grain of the workpiece with the blade angled to the workpiece. A straight bevel cut is made with the miter table set at
