Streszczenie treści zawartej na stronie nr. 1
500 & 600 Snowblower
TABLE OF CONTENTS
DESCRIPTION PAGE
Warranty......................................................................1
Safety Instructions & Safety Sign Locations ................ 2
Operating Instructions.................................................. 3
Assembly Instructions.................................................. 5
500 & 600 Snowblower Drawings ................
Streszczenie treści zawartej na stronie nr. 2
500 & 600 Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange, at Buhler
Streszczenie treści zawartej na stronie nr. 3
500 & 600 Snowblower SNOWBLOWER This manual is for both models #500 and #600 snowblowers. When ordering parts, specify model number and serial number. Both snowblowers are the push type and will mount to a tractor with a category 1 three-point hitch or a category 1 Quick Hitch and 540 rpm PTO. The #500 has a 50" cutting width while the #600 has a 60" cutting width. Both snowblowers come with a hand crank chute
Streszczenie treści zawartej na stronie nr. 4
500 & 600 Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three- point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. NOTE: PTO shaft angle should not exceed 20 ° for optimum performance and life. Damage may occur to PTO and/or snowblower if angle becomes more
Streszczenie treści zawartej na stronie nr. 5
500 & 600 Snowblower OPERATING INSTRUCTIONS – cont’d. 9. Periodically check all bolts for tightness. The bolt holding on the fan and the bearing bolts are of particular importance. 10. Danger: Always stop blower for servicing or unplugging. The PTO should be disengaged before dismounting from the tractor. 11. Caution: Always check to see that both ends of the PTO shaft are securely att
Streszczenie treści zawartej na stronie nr. 6
500 & 600 Snowblower #500 AND #600 SNOWBLOWER ASSEMBLY INSTRUCTIONS 1. Mount the discharge spout (#2) using the spout clamp (#3) bolted to the spout ring on the snowblower. Lubricate the spout ring and clamp. NOTE: A hydraulic cylinder and hose kit to control the spout deflector is available as an option. 2. Hitch Assembly: With right and left hitch tubes (#5 & #6) turned as shown in drawing, slide t
Streszczenie treści zawartej na stronie nr. 7
500 & 600 Snowblower 500 & 600 SNOWBLOWER ASSEMBLY INSTRUCTIONS – cont’d. 4. Hydraulic Control Assembly: (Option) a) Bolt the hydraulic swivel assembly (#21) to the back of the fan housing on the left side using ½” x 1 ¼” hex bolts, lock washers and hex nuts. b) Bolt the cylinder mounting bracket (#23) to the back of the fan housing on the right side using the same size hex bolts. c) Tu
Streszczenie treści zawartej na stronie nr. 8
500 & 600 Snowblower 500 & 600 SNOWBLOWER ASSEMBLY INSTRUCTIONS – cont’d. 6. PTO Shield: All snowblowers manufactured for the 1990 production and up are supplied with a PTO shield. The PTO shield (#65) bolts to the gearbox assembly using ¼” x ¾” hex bolts. Hook one end of the spring (#66) in the hole in the back edge of the PTO shield and the other end of the spring in the hole punched in the edge of
Streszczenie treści zawartej na stronie nr. 9
500 & 600 Snowblower - 8 -
Streszczenie treści zawartej na stronie nr. 10
500 & 600 Snowblower - 9 -
Streszczenie treści zawartej na stronie nr. 11
500 & 600 Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 500 & 600 SNOWBLOWERS ITEM PART # DESCRIPTION 1 905595 Main Body (#500) 905596 Main Body (#600) 2 965645 Discharge Spout
Streszczenie treści zawartej na stronie nr. 12
500 & 600 Snowblower 34 87553 1/2'' x 1 3/4'' Hex Bolt (pl) 35 81549 5/16'' x 3/4'' Hex Bolt (pl) 36 81569 5/16'' Lock Washer (pl) 37 81568 5/16'' Hex Nut (pl) 38 965630 Fan (#500) (Standard 3-Blade) 965445 Fan (#500) (4-Blade) 965642 Fan (#600) (Standard 3-Blade) 907118 Fan (#600) (4-Blade) 39 965505 Auger (#500) 965610 Auger (#600) 40 965637 40 Tooth Sprocket - #500 & #600 41 965631 Roller Chain (#50
Streszczenie treści zawartej na stronie nr. 13
500 & 600 Snowblower 74 961012 #16 Hair Pin Clip 75 961876 1/2'' x 1 1/2'' Clevis Pin (pl) 76 901435 1/2'' x 2 1/2'' Clevis Pin (pl) 77 902477 Skid Plate Weldt 78 812026 5/16'' x 1'' Hex Bolt (pl) 79 9812426 1/4'' x 1 3/4'' Spring Pin (pl) 80 936402 PTO Safety Chain 81 9812487 Narrow Rim Washer 1 1/4'' x 10ga (pl) 82 967110 Narrow Rim Washer 1 1/4'' x 14ga (pl) 83 9812439 Narrow Rim Washer 1 1/4'' x 18ga (pl
Streszczenie treści zawartej na stronie nr. 14
500 & 600 Snowblower #500 & #600 SNOWBLOWER PTO SHAFT - 13 -
Streszczenie treści zawartej na stronie nr. 15
500 & 600 Snowblower 500 Farm King Snowblower PTO Parts List Item # Part # Description F512 Shaft Complete 936379 Tractor Half of PTO (shear) 936380 Implement Half of PTO (clamp yoke) 1 936247 Shear Assembly 2 936168 Spring - Lock Kit (Collar, Spring, Ret. Ring, 2-3/8'' Balls) 3 936248 Shear Kit (3/8" x 1/2" Bolt, Blank, 24-1/4" Balls 4 Shear Bolt 3/8" x 1" (grade 8) - 1 required 5 812363 3/8" Lock
Streszczenie treści zawartej na stronie nr. 16
500 & 600 Snowblower 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.0 Dia 3 X2669 Seal Kit - 15 -
Streszczenie treści zawartej na stronie nr. 17
500 & 600 Snowblower 500 & 600 FARM KING SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION #500 Snowblower w/Hand Crank, 3-Blade Fan – Y500 1 F0430 Body Assembly #600 Snowblower w/Hand Crank, 3-Blade Fan – Y600 1 F0434 Body Assembly #500 Snowblower w/Hand Crank, 4-Blade Fan – Y500-4 1 F0431 Body Assembly #600 Snowblower w/Hand Crank, 4-Blade Fan – Y600-4 1 F04
