Instrukcja obsługi Brady DSP-2

Streszczenie treści zawartej na stronie nr. 1

DSP-2
Brady Worldwide Identification Solutions
6555 West Good Hope Road
P.O. Box 2131
Milwaukee, WI 53201-2131
Phone: (800) 537-8791
Fax: (800) 292-2289
www.bradyid.com
05/01
instructions

Streszczenie treści zawartej na stronie nr. 2

CONTENTS EXPLODED VIEW Read this user’s manual before use to ensure proper operation. Keep the manual on hand for reference in case there is a problem. Warranty Information .....................2 Features .........................................3 Notes ............................................3 Repair Policy ..................................3 Specifications .................................3 Set-up ............................................4 Operation/Adjustments ...................5 Main

Streszczenie treści zawartej na stronie nr. 3

SET-UP INSTRUCTIONS ADJUSTMENTS Hold Down Brush: Place the label roll onto the reel hanger bar. The roll should be against a metal lock clip so that it is held straight. Place second metal lock clip onto reel hanger bar to keep the Using the upper thumbscrew on the side of the machine, adjust the hold down brush for labels snug. tensioning. For best results, labels should be pressed firmly against the strip plate. However, if the labels are held too tightly, they will cause excessive drag on th

Streszczenie treści zawartej na stronie nr. 4

MAINTENANCE FEATURES • Turn machine off when not in use. • Will dispense butt-cut and die-cut material. • Remove liner material from take-up hub when it reaches approximately 2" in • Adjustable photosensor for pinpoint accuracy. diameter or if the motor appears to be straining. • Handled lock rod makes scrap removal easy. • Do not operate machine without covers in place. • No tools required for adjustment. • Do not operate if inspection reveals a damaged power or sensor cord. • Keep strip plate,