Streszczenie treści zawartej na stronie nr. 1
Automatic Ice Makers
Máquinas automáticas para hacer hielo
Machines automatiques pour
la fabrication des glaçons
User’s Manual (pages 1 - 28)
Manual del usuario (páginas 29 a 58)
Manuel de l’utilisateur (pages 59 à 87)
Be sure ice maker is standing upright 24 hours prior to plug-in.
Esté seguro que la máquina esté parada en posición vertical
24 horas antes que sea conectada.
Soyez sûrs que la machine se tient debout 24 heures
.
avant qu’elle se branche
Models/Modelos/Modèles : FIM70, FIM90,
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Page ICE MAKER SAFETY ····························· · 2 IMPORTANT SAFEGUARDS ························· · 3 - 5 TECHNICAL INFORMATION························· · 5 INTRODUCTION ································ · 6 COMPONENT LOCATIONS·························· · 7 ICE MAKER INSTALLATION························· · 8 - 14 Unpacking ································ · 8 Location Requirements·························· · 8 - 10 Electrical Requirements ························· · 10
Streszczenie treści zawartej na stronie nr. 3
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFEGUARDS Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. Franklin Industries strongly recommends that you have a professional install your new machine. The warranty may be affected or voided by an incorrect installation. To reduce the risk of fire, electrical shock or injury when using the ice maker, follow basic precautions, including the following: Plug into a grounded 3-prong outlet; do not remo
Streszczenie treści zawartej na stronie nr. 5
The ice maker should not be located next to ovens, grills or other sources of high heat. • The ice maker must be installed with all electrical, water and drain connections in • accordance with state and local codes. A standard electrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required. Do not kink or pinch the power supply cord or drain lines between the ice maker and • the cabinet. The fuse (or cir
Streszczenie treści zawartej na stronie nr. 6
it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The ice maker should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. Never unplug your ice maker by pulling on the power cord. Always grip the plug firmly and pull
Streszczenie treści zawartej na stronie nr. 7
INTRODUCTION The Franklin Chef® FIM Series of Ice Makers finds wide application in households, bars, restaurants, hotels, supermarkets, etc. These units produce crystal-clear, gourmet cube ice, and offer convenience for homeowners and hotel guests. An insulated ice storage bin is built into each ice maker. This user ’s manual is intended as a resource for persons installing, using and servicing models FIM70, FIM90 and FIM120. It contains valuable information on safety and maintenance. Franklin I
Streszczenie treści zawartej na stronie nr. 8
COMPONENT LOCATIONS Door Top cover Ice cube full sensor Right side Front cover Water sump Ice storage bin Ventilation louvers Ice scoop Leveling caster Control box Power switch (behind front cover) 7
Streszczenie treści zawartej na stronie nr. 9
ICE MAKER INSTALLATION Unpacking Excessive Weight Hazard Use two or more people to move and install ice maker. Failure to do so can result in back or other injury. Remove packaging materials IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice maker. Remove tape and glue from your ice maker before using. To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or • glue residue can also be easily removed by rubbing a small amount of liq
Streszczenie treści zawartej na stronie nr. 10
To ensure proper ventilation for your ice maker, the front of the unit must be • completely unobstructed. Allow at least 101 mm (4”) clearance at rear, and 15 mm (0.6”) at top and sides for proper air circulation. The installation should allow the ice maker to be pulled forward for servicing if necessary. When installing the ice maker under a counter, follow the recommended spacing • dimensions shown. Place electrical and water supplies and drain fixtures in the recommended locations as shown.
Streszczenie treści zawartej na stronie nr. 11
A standard electrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in • accordance with the National Electrical Code and local codes and ordinances is required. IMPORTANT: Do not kink or pinch the power supply cord between the ice maker • and wall or cabinet. Electrical Requirements Electrical Shock Hazard Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter. Never use an extension cord. Failure to follow these instructions can result
Streszczenie treści zawartej na stronie nr. 12
Leveling the Ice Maker It is important for the ice maker to be leveled in order to work properly. It can be raised or lowered by rotating the plastic sheaths around each of the four rolling casters on the bottom of the machine. If you find that the surface is not level, rotate the casters until the ice maker becomes level. You may need to make several adjustments to level it. We recommend using a carpenter’s level to check the machine. You will find that the casters make it easy for one perso
Streszczenie treści zawartej na stronie nr. 13
Connecting the water line: 1. Turn off main water supply. Turn on nearest faucet long enough to clear line of water. 2. Find a 1/2 in. to 3/4 in. vertical cold water pipe near the installation location. The distance should be less than 10 feet. The water supply hose provided with the ice maker is about 10 feet. 3. A shut-off valve must be installed to the main water supply. If the water pipe has a plain piece of copper tubing, attach a ¼” O.D. compression union to the tubing and remove th
Streszczenie treści zawartej na stronie nr. 14
Installation Types This ice maker has been designed for Mobile (free-standing) installation. It can also be Enclosed (as under a cabinet) or Built-in (sealed to the floor), although this last option is not the preferred method of installation. In every case, there must be adequate air space around the unit for ventilation purposes (see diagrams on page 8). Mobile Installation: A mobile installation will allow you to install the icemaker free-standing in any place you desire provided you have
Streszczenie treści zawartej na stronie nr. 15
5. If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker. 6. Push the ice maker into position. 7. Seal all around the cabinet to the floor with an approved caulking compound. OPERATION Final Check List before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the ice maker? 2. Did you clean the ice storage bin? 3. Have the installation instructions been followed, including connecting the machine to water,
Streszczenie treści zawartej na stronie nr. 16
Operating Method 1. Switch on the Power switch on the right side panel. The light will be on. The ice maker will start working automatically and feeding water. 2. After the first feeding of the water, the machine will automatically go to the ice making stage, and the sound of water spraying will be heard. 3. Ice will be harvested to the ice storage bin. When the storage bin is filled to the point that the ice-full sensor is covered, the ice maker will automatically stop working. The mach
Streszczenie treści zawartej na stronie nr. 17
Harvest: During the harvest cycle the compressor is still operating, but the water pump has stopped. Two other components have been energized: the hot gas valve and the water inlet valve. These two valves open and warm up the freezing surface, allowing the cubes to fall into the bin. The freeze cycle will restart when all the cubes have been harvested. How the machine uses water: The ice maker Evaporator begins with a fixed charge of water that is contained in the Water pump water sump. As t
Streszczenie treści zawartej na stronie nr. 18
Water running from the water sump to the evaporator plate may make a splashing • sound. Water running from the evaporator to the water sump may make a splashing sound. • As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in • your ice maker. You may hear air being forced over the condenser by the condenser fan. • During the harvest cycle, you may hear the sound of ice cubes falling into the ice • storage bin. • When you first start the ice maker, you may hear water
Streszczenie treści zawartej na stronie nr. 19
CLEANING AND MAINTENANCE If the ice maker is left unused for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside the ice maker after cleaning. Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets, or th
Streszczenie treści zawartej na stronie nr. 20
Stainless steel can discolor when exposed to chlorine gas and should be cleaned. Clean stainless steel with a mild detergent and warm water solution and a damp cloth. Never use abrasive cleaning agents. NOTICE: Stainless steel exposed to chlorine gas and moisture, such as in areas with spas or swimming pools, may show some discoloration. Discoloration from chlorine gas is normal. Condenser Cleaning A dirty or clogged condenser prevents proper airflow, reduces ice making capacity, and causes high
