Instrukcja obsługi Invacare Quick Release Caster

Streszczenie treści zawartej na stronie nr. 1

 






  

 


3. While holding the fork and using a socket head
SAFETY SUMMARY
wrench, remove the locknut that secures the
The following recommendations are made for the safe
fork, and washer in the head tube of the chair.
use of the Quick-Release Caster:
NOTE: The dust cover and locknut are not used with
WARNING
the quick release casters. Keep them for future use.
Check the quick-release caster for shipping dam-
age before using. In ca

Streszczenie treści zawartej na stronie nr. 2

2. Depress the detent pin of the quick release caster Approximately head tube cap and install over the top of the quick 1/4-inch release caster fork stem. Caster Fork Stem 3. Release the detent pin of the quick release caster head tube cap and pull on the caster fork to make sure the fork is securely attached to the chair. 4. Reinstall and securely tighten the bolt and locknut Caster that secure the two (2) spacers and caster onto the Head quick release caster fork. Tube 5. Repeat this procedure