Streszczenie treści zawartej na stronie nr. 1
USER’S MANUAL
835 MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 400lbs(181kgs).
SERIAL NUMBER (found on frame):
Streszczenie treści zawartej na stronie nr. 2
2 835i TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmi
Streszczenie treści zawartej na stronie nr. 3
3 www.smoothfitness.com PRECAUTIONS Pour réparations futures ou questions connexes : Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Précautions: AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les précautions importantes
Streszczenie treści zawartej na stronie nr. 4
4 835i TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes
Streszczenie treści zawartej na stronie nr. 5
5 www.smoothfitness.com POWER REQUIREMENTS Alimentation : UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN PROFESSIONNEL. Ce tapis roulant pourrait êtr
Streszczenie treści zawartej na stronie nr. 6
6 835i TREADMILL BEFORE YOU BEGIN Open the boxes: Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists on page 7 for a full count of the parts included. If you are missing any parts or have any questions contact us directly at 888-800-1167 Gather your tools: Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having all of the necessary equipment at
Streszczenie treści zawartej na stronie nr. 7
7 www.smoothfitness.com SUPPLIED COMPONENTS / SUPPLIED HARDWARE This list identifies the major components you will use to assemble this product. No. Description Qty. 101 212 311 310 Treadmill Base 835i -101 1 835i -212 Console Assembly 1 835i -311 Left Upright 1 835i -310 Right Upright 1 835i -309 Left Base Cover 1 835i -305 Right Base cover 1 302 301 309 305 835i -302 Left Handle Bar 1 835i -301 Right Handle Bar 1 835i -306 M8x15mm Allen Head Bolt
Streszczenie treści zawartej na stronie nr. 8
8 835i TREADMILL COMPLETE PARTS LIST Item No. Description Qty. 835i -100 835i -101 Base Frame 1 835i -102 Horizontal Adjustment 2 835i -103 Front Mobile Wheel Cover 2 835i -104 Front Mobile Wheel 2 835i -105 M4x10mm Bolt 4 835i -106 M4x12mm Bolt 2 835i -107 Air Shock 1 835i -108 M8x30mm Bolt 2 835i -109 M8 Nut 3 835i -110 Upper Locking Tube 1 835i -111 Lower Locking Tube 1 835i -112 M8x55 mm Bolt 1 835i -113 M8x50 mm Bolt 1 835i -114 Lift Arm 1 835i -115 Hex. Screw 39mm
Streszczenie treści zawartej na stronie nr. 9
9 www.smoothfitness.com COMPLETE PARTS LIST Item No. Description Qty. 835i -141 Right End Cap 1 835i -142 Left End Cap 1 835i -143 M4x15mm Bolt 4 Lower Console Wire 1 835i -144 835i -145 Power Cord 1 835i -146 Power Socket 1 835i -147 M3x8mm Bolt 2 835i -148 ON-OFF Switch 1 835i -149 Power Breaker 1 835i -150 Mudguard, motor control 1 835i -151 Mudguard, drive belt 1 835i -152 Running Deck Belly Pan 1 835i -153 M4x10 mm Bolt 15 835i -154 Adaptor 1
Streszczenie treści zawartej na stronie nr. 10
10 835i TREADMILL Item No. Description Qty. 835i -200 835i -201 Console frame 1 835i -202 Hand pulse upper cover 2 835i -203 Hand pulse lower cover 2 835i -204 Bolt M3*20mm 4 835i -205 Hand pulse plate 4 835i -206 Upper console cover 1 835i -207 Console housing 1 835i -208 Panel, console 1 835i -209 Bolt M3*6mm 14 835i -210 Safety key base 1 835i -211 Fan 1 835i -212 Bolt M3*30mm 4 835i -213 Speaker 2 835i -214 Bolt M4*12mm 17 835i -215 IHP 1 835i -216 Bolt M2.6*8mm
Streszczenie treści zawartej na stronie nr. 11
11 www.smoothfitness.com COMPLETE PARTS LIST Item No. Description Qty. 835i -300 835i -301 Right handle bar 1 835i -302 Left handle bar 1 835i -303 Receiver 1 835i -304 M8 Flat Washer 22 835i -305 Right protective cover 1 835i -306 M8x15mm Bolt 18 835i -307 Upper motor cover 1 835i -308 M4x10mm Bolt 4 835i -309 Left Right protective cover 1 835i -310 Right Upright 1 835i -311 Left Upright 1 835i -312 M8x100mm Bolt 2 835i -313 M8 Nut 2
Streszczenie treści zawartej na stronie nr. 12
12 835i TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
Streszczenie treści zawartej na stronie nr. 13
13 www.smoothfitness.com PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
Streszczenie treści zawartej na stronie nr. 14
14 835i TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Streszczenie treści zawartej na stronie nr. 15
15 www.smoothfitness.com ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK. STEP 1: Assemble the Upright NOTE: Make sure all wires are recessed into the frame. DO NOT trap or pinch. DO NOT tighten bolts until STEP2. When attaching the Right upright (310) first attach the 8 pin data cable to the wire 306 X10 in the upright. This will allow you to pull the data cable up through the upright after installation. (1) Slide the base frame covers over uprights. 30
Streszczenie treści zawartej na stronie nr. 16
16 835i TREADMILL ASSEMBLY STEP 2: Attach the Handle Bars (1). Take out right handle bar from carton, connect handle button wire (223). (2). Attach the Right and Left Handle Bar and secure using the M8x15mm Allen 306 X4 Head Bolt (306) with M8 Flat Washer (304). 304 X4 223 223 Speed Incline Tighten all bolts and fasteners now
Streszczenie treści zawartej na stronie nr. 17
17 www.smoothfitness.com ASSEMBLY STEP 3: Attach the Console to Left and Right Uprights (1) Connect Upper Console Wire (from console) and Lower Console Wire 306 X4 (from Right Upright) as shown below (222 to 144). Connect the adaptor wire (244 to 154). 304 X8 (2) Place the console housing over the Left and Right Uprights and secure using the 2 x M8x100mm Allen Head Bolt (312) with 2 x M8 Flat Washer (304) Insert the bolt through the upper hole. Then
Streszczenie treści zawartej na stronie nr. 18
18 835i TREADMILL ASSEMBLY STEP 4: Tighten the Lower Upright Bolt and attach Lower Protective Cover (1) Fully tighten the M8x15mm Allen Head Bolt (308) to for STEP1. 308 X2 (2) Attach the Left and Right Protective Cover, and secure using M4x10mm Pan Head Screw (308).
Streszczenie treści zawartej na stronie nr. 19
19 www.smoothfitness.com ASSEMBLY STEP 5: Attach power cord (145) to front of base from in diagram below.
Streszczenie treści zawartej na stronie nr. 20
20 835i TREADMILL ASSEMBLY STEP 6: Insert Safety Key (218) into Bottom Center of Console prior to operation. Your treadmill will not Function with out the safety key.
