Streszczenie treści zawartej na stronie nr. 1
Model No. PFTL73105.2
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.proformservice.com
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
www.proform.com
this equi
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERA
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure or see your local electronics store. that all users of this treadmill are adequately 12. Failure to use a properly functioning surge informed of all warnings and precautions. suppressor could result in damage to the con- 2. Use the treadmill only as descri
Streszczenie treści zawartej na stronie nr. 4
21. When folding or moving the treadmill, make treadmill, and before performing the mainte- sure that the storage latch is fully closed. nance and adjustment procedures described in this manual. Never remove the motor hood un- 22. Inspect and properly tighten all parts of the less instructed to do so by an authorized ser- treadmill regularly. vice representative. Servicing other than the procedures in this manual should be performed 23. Never insert any object into any opening. by an authorized
Streszczenie treści zawartej na stronie nr. 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM number and serial number before calling. The model 750 treadmill. The 750 treadmill offers an impressive number of the treadmill is PFTL73105.2. The serial array of features designed to make your workouts at number can be found on a decal attached to the tread- home more enjoyable and effective. And when you’re mill (see the front cover of this manual for the location). not exercising, the unique 750 treadmill can be folded up
Streszczenie treści zawartej na stronie nr. 6
5 ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is
Streszczenie treści zawartej na stronie nr. 7
2. With the help of a second person, carefully raise the 2 Uprights (84) to a vertical position. Console Have the second person hold the console assembly near Assembly the Uprights (84) as shown. Look under the console as- sembly and locate the Console Wire Harness (78). Cut the plastic ties securing the Upright Wire Harness (77) to the right Upright (84). Next, connect the Upright Wire Harness to the Console Wire Harness (78). Make 78 sure to connect the connectors properly (see the 77 inset
Streszczenie treści zawartej na stronie nr. 8
5. Place the treadmill in the storage position (see HOW TO 5 25 FOLD AND MOVE THE TREADMILL on page 20). 84 Next, place the cylinder end of the Shock (92) near the 25 bracket on the base of the Uprights (84). 92 Bracket See the two small inset drawings. Using your fingernail 25 or the end of a screwdriver, press on the end of the Cylinder Shock Pin (25) to loosen it from the Shock (92). Next, ro- tate the Shock Pin and pull it out of the Shock. Be care- ful to avoid losing the Shock Pin. 5a Se
Streszczenie treści zawartej na stronie nr. 9
If you purchase the optional chest pulse sensor, follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the key is removed from the con- sole and that the power cord is unplugged. Remove the indicated Screw (3) and the Access Door (76) from the back of the Console Base (85). Wire 85 Small 2. Connect the wire on the receiver (A) to the indicated Screws wire extending from the Console Base (85). Hold the receiver so the small cylinder is oriented as
Streszczenie treści zawartej na stronie nr. 10
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
Streszczenie treści zawartej na stronie nr. 11
Matrix Priority Display Display Key Clip FEATURES OF THE CONSOLE The console also offers two pulse programs that con- trol the speed and incline of the treadmill to keep your The treadmill console offers an impressive array of heart rate near target heart rate settings during your features designed to make your workouts more effec- workouts. Note: The pulse programs require the use of tive. When the manual mode of the console is se- the optional chest pulse sensor. lected, you can change the s
Streszczenie treści zawartej na stronie nr. 12
HOW TO TURN ON THE POWER speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in in- Plug in the power cord crements of 0.5 mph. Note: After the buttons are (see page 10). Next, locate pressed, it may take a moment for the walking belt Reset the reset/off circuit breaker to reach the selected speed setting. Position on the treadmill near the power cord. Make sure that If one of the ten numbered speed buttons is the circuit breaker is in the pressed, the w
Streszczenie treści zawartej na stronie nr. 13
The lower right corner addition, make of the display will show sure that your the distance that you hands are have walked or run, the clean. Next, elapsed time, your stand on the pace (in minutes per foot rails and Contacts mile), and the speed of the walking belt. Note: hold the metal When a program is selected (except for a custom contacts— program or pulse program 9), the lower right cor- avoid moving ner of the display will show the time remaining in your hands. When your pulse is detected,
Streszczenie treści zawartej na stronie nr. 14
settings for the next several segments will be HOW TO USE A PERSONAL TRAINER PROGRAM shown in the columns to the right. Insert the key into the console. When only three seconds remain in the first seg- 1 ment of the program, both the Current Segment See HOW TO TURN ON THE POWER on page column and the column to the right will flash and a 12. series of tones will sound. If the speed and/or in- cline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the
Streszczenie treści zawartej na stronie nr. 15
Measure your heart rate if desired. Press the Start button or the Speed increase 5 3 button and program the desired speed and in- See step 6 on page 13. cline settings. A moment after the button is pressed, the walking Turn on the fan if desired. 6 belt will begin to move. Hold the handrails and begin walking. See step 7 on page 13. Refer to the matrix. Each custom program is di- When you are finished exercising, remove the vided into one-minute segments. One speed set- 7 key from the console. t
Streszczenie treści zawartej na stronie nr. 16
in the matrix.) The speed settings for the next four HOW TO USE A CUSTOM PROGRAM segments are shown in the columns to the right. Insert the key into the console. When only three seconds remain in the first seg- 1 ment of the program, both the Current Segment See HOW TO TURN ON THE POWER on page column and the column to the right will flash, a 12. series of tones will sound, and the speed setting and the incline setting will flash in the display. When the first segment ends, all speed settings Se
Streszczenie treści zawartej na stronie nr. 17
Enter a target heart rate setting. HOW TO USE A PULSE PROGRAM 4 If pulse program 9 is selected, the target heart rate setting for the CAUTION: If you have heart prob- entire program will flash lems, or if you are over 60 years of age and in the display. If de- have been inactive, do not use the pulse pro- sired, press the Heart grams. If you are taking medication regularly, Rate increase and de- consult your physician to find whether the crease buttons to change the target heart rate set- medica
Streszczenie treści zawartej na stronie nr. 18
When the first segment ends, all target heart rate To stop the program at any time, press the Stop settings will move one column to the left. The tar- button. To restart the program, press the Start but- get heart rate setting for the second segment will ton or the Speed + button. The walking belt will then be shown in the flashing Current Segment begin to move at 1 mph. When the console com- column. pares your heart rate to the target heart rate set- ting, the speed and/or incline of the treadm
Streszczenie treści zawartej na stronie nr. 19
THE INFORMATION MODE/DEMO MODE IMPORTANT: If a “d” appears in the The console features an information mode that keeps lower left corner track of the total number of hours that the treadmill has of the display, the been operated and the total distance that the walking console is in the belt has moved. The information mode also allows you “demo” mode. to select miles or kilometers as the unit of measure- This mode is in- ment and to turn on and turn off the demo mode. tended to be used only when a
Streszczenie treści zawartej na stronie nr. 20
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the pla
