Instrukcja obsługi Mazda 2006 MX-5

Streszczenie treści zawartej na stronie nr. 1

Mazda North American Operations
Service Bulletin
Irvine, CA 92618-2922
© 2006 Mazda Motor of America, Inc.
Subject: Bulletin No: 09-033/06
CENTER CONSOLE LID WILL NOT STAY CLOSED
Last Issued: 7/21/2006
2006 MX-5 - CENTER CONSOLE LID WILL NOT STAY CLOSED
APPLICABLE MODEL(S)/VINS
2006 MX-5
DESCRIPTION
On some vehicles, the center console lid may not stay in the closed position due to a broken latch.
Customers having this concern should have the console lid replaced using the following repair pro

Streszczenie treści zawartej na stronie nr. 2

Bulletin No: 09-033/06 Last Issued: 7/21/2006 © 2006 Mazda Motor of America, Inc. 6. Using a flat-tipped screwdriver, slide guides rearward to disengage tabs from sides of cup holder assembly as shown. PLACE FLAT TIPPED SCREWDRIVER INTO SLOT AND SLIDE GUIDE TOWARD REAR OF CUP HOLDER TO DISENGAGE TABS (REPEAT FOR BOTH SIDES) 1653b GUIDE TAB SHOWN ENGAGED 1653c GUIDE TAB SHOWN DISENGAGED 7. Repeat for other side. 8. Carefully lift console lid and guides from cup holder assembly. Page 2 of 5

Streszczenie treści zawartej na stronie nr. 3

Bulletin No: 09-033/06 Last Issued: 7/21/2006 © 2006 Mazda Motor of America, Inc. 9. Remove guides from old console lid. NOTE: • Make note of sides of cup holder assembly guides are removed from for installation. Guides cannot be installed backward or on opposite sides. Attempting to do so may damage the guides and/or the cup holder assembly. 10. Install old guides onto new console lid. Line up with front edge of guides with front of lid. PLACE GUIDES ONTO NEW CENTER CONSOLE LID 1653e 11

Streszczenie treści zawartej na stronie nr. 4

Bulletin No: 09-033/06 Last Issued: 7/21/2006 © 2006 Mazda Motor of America, Inc. 12. Carefully lay lid and guides down to line up remaining tabs. 13. Using a flat-tipped screwdriver, slide guide forward to engage tabs to sides of cup holder assembly. PLACE FLAT TIPPED SCREWDRIVER INTO SLOT AND SLIDE GUIDE TOWARD FRONT OF CUP HOLDER TO ENGAGE TABS (REPEAT FOR BOTH SIDES) 1653g GUIDE TAB SHOWN DISENGAGED 1653h GUIDE TAB SHOWN ENGAGED 14. Slide center console lid to fully closed position. Page

Streszczenie treści zawartej na stronie nr. 5

Bulletin No: 09-033/06 Last Issued: 7/21/2006 © 2006 Mazda Motor of America, Inc. 15. Press down on rear of guides to ensure they are properly seated into cup holder assembly. FIRMLY PRESS DOWN ON REAR OF GUIDES TO ENSURE REAR TABS LOCK INTO POSITION 1653i 16. Install cup holder to center console. 17. Install center console to vehicle. 18. Verify repair. PART(S) INFORMATION Part Number Description Qty. Notes NE51-64-390 -02 Center Console Lid Ass’y 1 Black NE51-64-390 -89 Center Console Lid