Instrukcja obsługi Harbor Freight Tools 94241

Streszczenie treści zawartej na stronie nr. 1

HOT HOUSE
MINI GREENHOUSE
94241
ASSEMBLY & OPERATING INSTRUCTIONS
Use only with GFCI electrical outlet
Due to continuing improvement, actual product may differ slightly from product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbo

Streszczenie treści zawartej na stronie nr. 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No.____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Material: (1) Polyester Nylon heating mat Tray Dimensions: 21-3/4” Long X 11-3/4” Wide X 2-1/8” High Seed Inserts: 1-3/4”

Streszczenie treści zawartej na stronie nr. 3

5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not abuse the Power Cord. Never use the Power Cord to carry the Hot House or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, and sharp edges. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. 7. When operating a power tool outside, use an outdoor e

Streszczenie treści zawartej na stronie nr. 4

GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the Hot House. Never remove the grounding prong from the plug. Do not use the Hot House if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have

Streszczenie treści zawartej na stronie nr. 5

2. Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) Figure B EXTENSION CORDS 1. Grounded appliances require a three wire extension cord. Double Insulated products can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power

Streszczenie treści zawartej na stronie nr. 6

Specific Safety Rules for the Hot House 1. Maintain labels and nameplates on the Hot House. These carry important information. If the labels are unreadable or missing, contact Harbor Freight Tools for replacement. 2. Always place the Hot House on a dry, flat, level, sturdy non-flammable work surface capable of supporting the weight of the Hot House and any plants or seeds. Make sure to place the Hot House in a location that is out of reach of children. 3. Turn off the Hot House and unplug it

Streszczenie treści zawartej na stronie nr. 7

9. Replant the seeds. Once the seeds are replanted, the Hot House may be used to begin a new batch of seeds. 10. When watering your seeds, make certain to not overflow the seed containers or spill excessive water on the Heating Mat (4). Storage and Maintenance 1. Store the Hot House in a place out of the sunlight. Because parts of the Hot House are easily damaged by impact or being dropped, store in a safe and secure location out of the reach of children. 2. Clean and wash out the Seeding Ins