Instrukcja obsługi Soleus Air FT1-25-20/21

Streszczenie treści zawartej na stronie nr. 1

10” Retro Metal Table Fan
Model No: FT1-25-20/21
Operating Instructions
FT1-25-20/21
© 2006 Soleus Air International

Streszczenie treści zawartej na stronie nr. 2

Thank you for choosing a Soleus Air 10” Table Fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name:

Streszczenie treści zawartej na stronie nr. 3

WARNING This fan has a grounded three pronged plug intended to fit into a three slot outlet. (A) An adapter is available for connecting three pronged plugs into two slot outlets. (B) When doing so, the green ground- ing tab extending from the adapter must be fastened under the wall plate’s mounting screw. The adapter should not be used if a three-slot out- let is available. DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED PLUG. TECHNICAL SPECIFICATIONS Voltage Rating 120V, 6

Streszczenie treści zawartej na stronie nr. 4

PRODUCT DIAGRAM A) Fan Motor F) Mounting Nut B) Oscillation Knob G) Speed Control Lever C) Back Grille H) Fan Base D) Front Grille I) Adjustable Tilt Knob E) Fan Blade J) Motor Shaft 4

Streszczenie treści zawartej na stronie nr. 5

ASSEMBLY INSTRUCTIONS Estimated assembly time: Approximately 5 minutes Remove the fan and packaging materials from the box. Remove the mounting nut from the motor shaft. Position the back grille over the motor shaft, aligning the holes in the back grille with the two knobs that pro- trude from the motor. Make sure the handle is at the top. Secure the back grille by screwing on the mounting nut. Turn clockwise and tighten firmly. Slide the fan blade onto

Streszczenie treści zawartej na stronie nr. 6

OPERATING INSTRUCTIONS 1. Set the fan on a stable, level surface. 2. Confirm that the Speed Control Lever is set to “O” (off). Plug the cord into a standard outlet. 3. Adjust to the desired speed setting: O: Off I: Low Speed II: Medium Speed III: High Speed 4. The fan can operate in oscillation or stationary mode. Press the Oscillation Knob down to activate the oscillating mode. To stop oscillation, pull control knob up. 5. To adjust the tilt of the fan head, loosen the Adju

Streszczenie treści zawartej na stronie nr. 7

CLEANING & MAINTENANCE 1. Turn the fan off and unplug the unit. 2. Wipe the fan down with a damp cloth for most efficient operation. 3. Air dry the fan completely before use. 4. Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit. 5. Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing. STORAGE If the fan will not be used for a long period of time, store it in a co

Streszczenie treści zawartej na stronie nr. 8

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FT1-25-20/21 10” Table Fan to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time