Streszczenie treści zawartej na stronie nr. 1
English Español
For Your Records and
Warranty Assistance
T T Type B ype B ype B,G,T Models ,G,T Models ,G,T Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 41828-01
20090818
©2009 Hunter Fan C
Streszczenie treści zawartej na stronie nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Streszczenie treści zawartej na stronie nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
Streszczenie treści zawartej na stronie nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Streszczenie treści zawartej na stronie nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers Ceiling Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure. Step 2-2 The pilot holes should be 9/64” in diam
Streszczenie treści zawartej na stronie nr. 6
3 • Assembling and Hanging the Fan Steps 3-1 – 3-2 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod You can assemble your fan for standard or angled mounting as shown in steps 3-1 – 3-4. For low profile mounting (ceilings less than 8 feet high), go to steps 3-5 – 3-11 on the next page. Canopy For Standard or Angled Mounting: 3-1. Unbundle the wires from the fan. Canopy 3-2. To assemble fan to hang down from a flat or angled ceiling, inser
Streszczenie treści zawartej na stronie nr. 7
3 • Assembling and Hanging the Fan (Low Profile Only) WARNING: Fan may fall if not assembled as directed in these Step 3-6 installation instructions. You can assemble your fan for standard or angled mounting as shown in steps 3-1 – 3-4 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-5 – 3-11 on this page. For Low Profile Mounting: Note: For low profile mounting, the downrod is replaced with the low profile washer. 3-5. Unbundle the wires f
Streszczenie treści zawartej na stronie nr. 8
fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a Wire qualified electrician. Connector Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. Dual Switch Wiring 4-2. To connect the wires, hold the bare metal leads together and place a wire
Streszczenie treści zawartej na stronie nr. 9
5 • Installing the Canopy and Canopy Trim Ring Step 5-1 Note: Be sure the arrows on the downrod and on the ceiling plate are both pointing toward the tab hole on the canopy. Tab 5-1. Hook the tab hole in the canopy over the tab on the ceiling plate. 5-2. Raise the canopy. Make sure the holes in the canopy and in the Canopy Tab Hole ceiling plate are aligned. 5-3. Partially install the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them. 5-4. Using bo
Streszczenie treści zawartej na stronie nr. 10
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and rubber shipping bumper
Streszczenie treści zawartej na stronie nr. 11
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two
Streszczenie treści zawartej na stronie nr. 12
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together Plug one way. Make sure the connectors are properly aligned before Connector connecting them. Incorrect connection could cause improper operation and damage to the product. 7-7. Place th
Streszczenie treści zawartej na stronie nr. 13
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-10. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the cen
Streszczenie treści zawartej na stronie nr. 14
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-15. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 7-16. Disconnect the plug connectors between the two white wires. 7-17. Uninstall the connector and washer from the end of the Lower Switch light fixture inside the lower switch housing. Housing 7-18. Unscrew the threaded rod of the light fixture from the low
Streszczenie treści zawartej na stronie nr. 15
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has five settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain cont
Streszczenie treści zawartej na stronie nr. 16
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws and blade iron armat
