Streszczenie treści zawartej na stronie nr. 1
English Francias
For Your Records and
Warranty Assistance
T T Type 3 Models ype 3 Models ype 3 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42753-01
20091230
©2009 Hunter Fan Co.
Streszczenie treści zawartej na stronie nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Streszczenie treści zawartej na stronie nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Con
Streszczenie treści zawartej na stronie nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Streszczenie treści zawartej na stronie nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box Ceiling and associated wall switch location. If you cannot lock the circuit breakers Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the Step 2-2 outermost holes in the outlet
Streszczenie treści zawartej na stronie nr. 6
3 • Assembling and Hanging the Fan Steps 3-2 – 3-3 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod 3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert Canopy the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod. Canopy 3-3. Loosen the square head set screw on the adapter to install the Trim Ring pipe
Streszczenie treści zawartej na stronie nr. 7
4 • Securing Fan to Secondar y Support System 4-1. Find the looped end of the braided cable and insert it through the ceiling plate and one of the holes in the outlet box into the ceiling. 4-2. Access the support brace in the ceiling. You may not be able to do this from below the ceiling depending on your installation site. 4-3. Drive a #10 x 38mm (1-1/2”) wood screw and washer into the side of the brace that holds the outlet box. Leave 3mm (1/8”) of space between the support brace and t
Streszczenie treści zawartej na stronie nr. 8
5 • Setting the Remote Transmitter and Receiver You must now set the jumpers in the remote transmitter and receiver Example Jumpers Settings so that they match. Receiver 1 Receiver 2 5-1. Change the position of the jumpers in the transmitter and the 4 3 2 1 4 3 2 1 receiver. Be sure the position of the jumper in the transmitter 4 3 2 1 4 3 2 1 matches the position of the jumper in the receiver. If they don’t match, the controller will not function. For instructions on how to set the jumpers
Streszczenie treści zawartej na stronie nr. 9
6 • Wiring the Fan Receiver All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. A 6-1. Make sure the power is still off. 6-2. To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist clockwise until tight. For all these B connections use the wire nuts provided. CAUTION: Be sure no bare wire or wire strands are visible after F making connect
Streszczenie treści zawartej na stronie nr. 10
7 • Installing the Canopy and Canopy Trim Ring Step 7-2 7-1. Holding the canopy, raise the fan off the hook. Ceiling Plate 7-2. Align the slots in the canopy with the tabs on the ceiling plate. 7-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 7-4. Partially install the three canopy screws into the canopy one at a Canopy Trim Canopy Ring time. Once all three screws are in, tighten the
Streszczenie treści zawartej na stronie nr. 11
8 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 8-1. Your fan may include blade grommets. If your fan has grommets, Step 8-1 (Detail) insert them by hand into the holes on the blades. 8-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 8-3. Remove the blade mounting screws and rubber shipping bumper
Streszczenie treści zawartej na stronie nr. 12
9 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 9-1. To attach the upper switch housing, partially install two
Streszczenie treści zawartej na stronie nr. 13
9 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 9-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together Plug one way. Make sure the connectors are properly aligned before Connector connecting them. Incorrect connection could cause improper operation and damage to the product. 9-7. Place th
Streszczenie treści zawartej na stronie nr. 14
9 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 9-8. First install B10 candelabra bulbs (60 Watt Maximum) into the 9-9. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 9-10. Screw the finial onto the threaded rod end until tight. Light Bulbs (B10 Candelabra Base 60 Watt Maximum) Note: In compliance with Canadian energy regulations, this ceiling fan contains a device that res
Streszczenie treści zawartej na stronie nr. 15
9 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 9-11. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 9-12. Disconnect the plug connectors between the two white wires. 9-13. Uninstall the connector and washer from the end of the Lower Switch light fixture inside the lower switch housing. Housing 9-14. Unscrew the threaded rod of the light fixture from the low
Streszczenie treści zawartej na stronie nr. 16
10 • Operating the Remote Control and Mounting the Holder 10-1. The remote transmitter has individual buttons for turning the fan off and on and controlling the light and fan speed. Fan Speed High 10-2. For best operation, start the fan by pressing high, then select Fan Speed your desired speed. Medium Fan Speed 10-3. The light button turns the light on to full brightness. To dim the Low Fan Off light, hold the light button down until you reach your desired brightness. Push the light
Streszczenie treści zawartej na stronie nr. 17
11 • Operating and Cleaning Your Ceiling Fan 11-1. Turn on electrical power to the fan. 11-2. The power to the fan is controlled by the remote. The remote control has four settings in sequence: High, Medium, Low, and Off. 11-3. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around
Streszczenie treści zawartej na stronie nr. 18
12 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Push the fan speed buttons on the remote to ensure the fan is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket s
