Streszczenie treści zawartej na stronie nr. 1
2 EN
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa-
tion and precautions contained in the following pages to ensure safe use of your new camcorder.
Using This Instruction Manual
• All major sections and subsections are listed in the Table Of Contents (Z pg. 3).
• Notes appear after most subsections. Be sure to read these as well.
• Basic and advanced features/operation are separated for easier reference.
It is recommended that y
Streszczenie treści zawartej na stronie nr. 2
MAJOR FEATURES CONTENTS EN EN 3 3 GETTING STARTED 4 n Program Manager II (Z pg. 18 – 31) Power .............................................. 4 n Programme AE with Special Effects Clock (Lithium) Battery Insertion/Removal..... 6 (Z pg. 18, 19) •Auto Mode Lock •Auto Mode Release Date/Time Setting ................................ 7 •Electronic Fog Filter •ND Effect Tape Length Setting ............................... 8 •Sepia •Twilight •Sports Recording Mode Setting .......................... 8
Streszczenie treści zawartej na stronie nr. 3
GETTING STARTED 4 EN Marks Power To AC outlet This camcorder’s 3-way power supply system lets you CHG. (charge) choose the most appropriate source of power. indicator NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER REFRESH indicator Connect the charger’s AC power cord to a wall 1 outlet. REFRESH ATTACH BATTERY PACK The AC power adapter fe
Streszczenie treści zawartej na stronie nr. 4
EN 5 CHARGE MARKER Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs. c Charging times noted on page 4 are for fully discharged battery pack, and dis
Streszczenie treści zawartej na stronie nr. 5
GETTING STARTED (cont.) 6 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensure that the plu
Streszczenie treści zawartej na stronie nr. 6
EN 7 Date/Time Setting ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar Select Dial 2 to “DATE/TIME”, then press it. The DATE/TIME Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial MENU to move highlight bar to “EXIT” and press it, then Jog Dial go to step 6. •
Streszczenie treści zawartej na stronie nr. 7
GETTING STARTED (cont.) 8 EN Viewfinder Tape Length Setting MENU Set the tape length according to the length of the tape 4MENU END used. FOCUS AUTO EXPOSURE AUTO DATE TIME 25. 12. 98 ACCESS MENU SCREEN TELE MACRO OFF First set the Power Switch to “CAMERA”. Turn the TAPE LENGTH T60 M. W. B. AUTO 1 Select Dial to any position except AUTO LOCK, ZOOM SPEED FAST then press the MENU Jog Dial. 4NEXT Menu Screen SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar TAPE LENGTH 2 t
Streszczenie treści zawartej na stronie nr. 8
EN 9 Loading/Unloading A Cassette OPEN CASSETTE HOLDER Slide EJECT until the holder opens. Do not use force 1 to open. 1 1 INSERT/REMOVE CASSETTE Make sure the label is facing outward. 3 3 2 2 2 CLOSE CASSETTE HOLDER Press PUSH and make sure the holder is closed and 3 locked. NOTES: c A cassette holder can’t be opened unless a power Turn to take supply is attached. up slack. c Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the Erase Protec
Streszczenie treści zawartej na stronie nr. 9
GETTING STARTED (cont.) 10 EN Power Zoom Button Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop Button and Power Zoom Button. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment POSITION VIEWFINDER 3 Adjust the viewfinder manually for best viewability 1 (see illustration to the left). SELECT M
Streszczenie treści zawartej na stronie nr. 10
EN 11 Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 2 1 through the top of the eyelet 1, then fold it back 3 and thread it through the keeper 2, and then 2 1 through the buckle 3. Repeat the procedure to 1 attach the other end of the strap to the other eyelet 4, making sure the strap isn’t twisted. 4 ADJUST LENGTH Adjust as shown in the illustration at left 1, then 2 slide both keepers snug against the eyelets to prevent slipping 2. Tripod Mounting A
Streszczenie treści zawartej na stronie nr. 11
RECORDING Basic Recording 12 EN LENS COVER Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 4) c Tape Length Setting (Z pg. 8) c Recording Mode Setting (Z pg. 8) c Grip Adjustment (Z pg. 10) Power LOAD A CASSETTE indicator Slide EJECT to open the cassette holder, then insert 1 the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked. Power Switch ENTER RECORD-STANDBY MODE Start/Stop Bu
Streszczenie treści zawartej na stronie nr. 12
EN 13 Tape remaining time indicator STOP RECORDING 25MIN MIN Press the Recording Start/Stop Button again to stop (Now calculating) 4 recording. •The camcorder re-enters the Record-Standby 120MIN mode. 119MIN NOTES: c A cassette holder can’t be opened unless a power supply is attached. 3MIN c There may be a delay after you slide EJECT until the holder opens. Do not use force. 2MIN c The displayed remaining time is approximate. (Blinking) c The time required to calculate the remaining tape length,
Streszczenie treści zawartej na stronie nr. 13
RECORDING Basic Features 14 EN FEATURE: Zooming Zoom-in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. OPERATION: Zoom In Press the “T” of the Power Zoom Button. Zoom-out Zoom Out Press “W” of the Power Zoom Zoom indicator bar Button. n Zooming speed is available. A total of 4 zoom speeds are available. 2 speeds can be selected depending on how hard the Power Zoom Button is pressed (press the button Power Zoom button fully for regular-speed, pres
Streszczenie treści zawartej na stronie nr. 14
EN 15 FEATURE: Quick Review PURPOSE: To check the end of the last recording. OPERATION: 1) Press “ ” and release quickly 5SEC. REC during the Record-Standby mode. n Tape is rewound for about 2 seconds and played back automatically, then pauses in Record-Standby mode for the RETAKE (R/F) next shot. NOTE: Distortion may occur at start of playback. This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record-Standby mode. 2) Press ei
Streszczenie treści zawartej na stronie nr. 15
RECORDING Basic Features (cont.) 16 EN FEATURE: Video Light PURPOSE: To brighten the scene when natural lighting is too dim. OPERATION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the LIGHT OFF/AUTO/ON subject. OFF : Turns off the light. n The video light can only be used with the camcorder’s power on. n It is recommended to set th
Streszczenie treści zawartej na stronie nr. 16
EN 17 DATE/TIME FEATURE: Date/Time/Character Insert PURPOSE: To display the date and time in the viewfinder or on a connected colour monitor, as well as to record them manually or automatically. OPERATION: 1) Turn the Select Dial to any position except AUTO LOCK. 2) Choose a display mode by pressing DATE/TIME repeatedly while in Record-Standby to cycle through the modes as shown in the Display Select Dial illustration to the left. n You should have already performed the Date/Time Setting procedu
Streszczenie treści zawartej na stronie nr. 17
D N G F E E S A D E O L E M R O T K RECORDING Advanced Features 18 EN 1 second later, the mode is activated. Programme AE With Special Effects All you have to do to access any of the variety of Viewfinder shooting effects is to turn the Select Dial. SEPIA SELECT MODE Turn the Select Dial until the symbol of the function 1 you want is aligned with the mark. •The selected mode’s name and its indication are displayed for approx. 1 second. Then the name After 1 sec. disappears, and only the indicat
Streszczenie treści zawartej na stronie nr. 18
EN 19 Dial Viewfinder Dial Viewfinder Mode Mode symbol indication symbol indication LOCK AUTO LOCK Auto Mode Lock TWILIGHT Twilight Auto Mode Lock Twilight Locks the camcorder in Full Auto mode, preventing Dusk, twilight scenery, fireworks, etc., look more incorrect operation due to accidental button natural and dramatic. The following happens when pressing during shooting. Twilight mode is selected: • In this mode the following controls are disabled; •Auto gain control is turned off. DATE/TIME
Streszczenie treści zawartej na stronie nr. 19
RECORDING Advanced Features (cont.) 20 EN Fade-in Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade- out works at recording end or when you enter Record- Standby mode. ENGAGE FADE-STANDBY MODE Fade-out Press EFFECT to engage the Fade-Standby mode. 1 Viewfinder 4EFFECT BK After 2 sec. •“ FADER” is displayed for approx. 2 seconds. FADER BK Then “FADER” disappears, and only “ ” remains. START OR END RECORDING Press Recording Sta
Streszczenie treści zawartej na stronie nr. 20
EN 21 Viewfinder Super LoLux(Gain Up) 4S.LX Bright, natural recordings can be taken even in areas with After 2 sec. low or poor lighting. MAX SELECT SUPER LOLUX MODE Press SUPER LOLUX repeatedly to cycle through the 1 modes as shown to the left. Once the desired mode appears, it is engaged. MAX •The mode’s name is displayed for approx. 2 NORM seconds, then disappears. MAX : To record a subject in a dark lit environ- OFF ment. When it is more convenient to shoot the subject with a brighter image
