Instrukcja obsługi Aube Technologies TH148LE

Streszczenie treści zawartej na stronie nr. 1

400-147-010-C (TH147_TH148 NP Aube) ENG.fm Page 1 Monday, November 27, 2006 10:41 AM
TH147 & TH148LE
2. Installation
Electronic Thermostats
Note: The installation must be performed by an electrician or a qual-
ified installer.
Installation
and User Guide
2.1 Removing the Old Thermostat
IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, CUT
POWER TO THE HEATING/COOLING SYSTEM.
1. Introduction
Remove the old thermostat to access the wires.
The TH147 and TH148LE thermostats can be used to control:

Streszczenie treści zawartej na stronie nr. 2

400-147-010-C (TH147_TH148 NP Aube) ENG.fm Page 2 Monday, November 27, 2006 10:41 AM 2.3 Connecting the Thermostat 2.3.5 4-wire Heating and Cooling Refer to the following table for matching the wire labels with the thermostat terminals. Terminals Description Wire labels Heat relay Rh Heating power supply Rh, R, 4, V Rc Cooling power supply Rc, R Cool relay W Heating signal W, W1, H Fan relay Y Cooling signal Y, Y1, M GFan G, F Un / Un Input for a remote control device (TH148LE only) - 2.3.6 5

Streszczenie treści zawartej na stronie nr. 3

400-147-010-C (TH147_TH148 NP Aube) ENG.fm Page 3 Monday, November 27, 2006 10:41 AM 2.6 Installing the Batteries 3.3 Viewing and Setting the Ambient Temperature The ambient temperature is normally displayed. To view the set- point, press once on one of the buttons. The setpoint is dis- played for 5 seconds and is indicated by the symbol on the display. During the setpoint display, press one of the buttons to change it. 3.4 Backlight The display illuminates for 12 seconds when the backlig

Streszczenie treści zawartej na stronie nr. 4

400-147-010-C (TH147_TH148 NP Aube) ENG.fm Page 4 Monday, November 27, 2006 10:41 AM 4. Configuration Menu 6. Warranty Aube warrants this product, excluding battery, to be free from DISPLAY DESCRIPTION DEFAULT OPTIONS defects in the workmanship or materials, under normal use and ser- Temperature display °C °C or °F vice, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is Unoccupied mode setpoint - heat- 10°C 5°C to