Streszczenie treści zawartej na stronie nr. 1
by
1479/1479-21/532/532-77
Wireless Thermometer with
Remote Pager plus Timer
Instruction Manual
CUSTOMER SERVICE INFORMATION
PLEASE READ!
For your questions regarding this product,
please contact us at:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
1-866-843-3905
www.taylorusa.com
Please contact us before returning to retailer.
1
Streszczenie treści zawartej na stronie nr. 2
2
Streszczenie treści zawartej na stronie nr. 3
® Thank you for purchasing a Taylor Wireless Thermometer with Remote Pager plus Timer This product helps to eliminate over-cooking or under-cooking foods. Presetting the thermometer to the recommended cooking temperatures and/or cooking times is simple and ensures that food will be cooked to your preferred taste. Please read this instruction manual carefully before use. Keep these instructions handy for future reference. Battery Information The base thermometer unit operates on 2 AAA batteries (
Streszczenie treści zawartej na stronie nr. 4
On/Off Operation 1. Place the base unit as close as possible to the remote sensor. This will ensure easy synchronization between the base and remote. After set up is complete, keep the units within effective transmis- sion range (within 200 feet). 2 2. Turn on the base unit first by press- ing the On/Off button.The LCD Press “On/Off” on base unit will turn on and the unit will beep. 3 3. Turn on the remote unit by pressing the On/Off button (located on the back).The remote will vibrate, beep and
Streszczenie treści zawartej na stronie nr. 5
7.Auto off feature to conserve battery power:The base unit will au- tomatically turn off after 30 minutes if there is no change in tem- perature or no buttons are pressed.The remote unit will vibrate then automatically turn off if the transmission signal is lost for 5 minutes.The remote unit will also turn off automatically if the base is turned off. Positioning the thermometer units 1. The base unit may be placed on a flat surface using the clip stand on the back of the unit. It may also be att
Streszczenie treści zawartej na stronie nr. 6
3 3 3. Press the “Meat” but- ton to scroll through the meat choices. Press the “Select” button to select the displayed Press “Meat” then “Select” meat type.The default taste setting “Medium” flashes. 4. Press the “Taste” but- 4 4 ton to scroll through the taste choices. Press the “Select” button to select the displayed taste.The Set Tempera- Press “Taste” then “Select” ture digits will blink. 5. Press the “Select” button to accept 5 the Set Temperature displayed. Or change the temperature manual
Streszczenie treści zawartej na stronie nr. 7
General Cooking Procedures 1. Preheat the grill or oven to desired cooking temperature. Place the food in the oven or grill. 2. Sterilize the metal probe by inserting it into an appropriate solution such as boiling water for several minutes. Make sure the sensor plug on the end of the cord is plugged into the thermometer base unit. (Note: if the probe is not plugged in 2 properly, the display will show “LL.L”.) 3. Insert the metal probe into the thickest part of the food to be cooked. Do not com
Streszczenie treści zawartej na stronie nr. 8
• When the current temperature is within 10 degrees of the target temperature, the remote will beep 5 times, vibrate and flash.The base will beep 5 times and flash. 5 beeps = 10 degrees from done • When the current temperature and target temperature are equal (indicating the food is done), the units consistently beep, vibrate and flash (base will not vibrate). Press the “Start/Stop” button to turn off the alarm. Constant beeps = done. Press “Start/Stop to stop beeps. 6. When the food is ready, r
Streszczenie treści zawartej na stronie nr. 9
Timer Operation This unit is also equipped with a convenient timer. It can operate as an independent timer or work along with the thermometer function. 2 1. If necessary, turn the base and remote on (see on/off operation). 2. Press the “Timer/Thermometer” button. The Timer digits flash. Press “Timer/ Thermometer” 3 3. Press the “Hr/+” but- 3 ton to set the hours. Press the “Min/-” but- ton to set the minutes. Press “Start/Stop” to Press “Hr/+” Press “Min/-” confirm. Press and hold the buttons to
Streszczenie treści zawartej na stronie nr. 10
6.As time progresses, the base and remote units will signal timer alerts in the following manner: • 10 minutes before the time is up, the remote will beep 3 times, vibrate and flash. The base will beep 3 times and flash. Note: that the unit uses to different beep tones to help you iden- tify between thermometer and timer notifications. Only the re- mote will vibrate. 6 3 beeps = 10 minutes from done • 5 minutes before the time is up, the remote will beep 5 times, vi- brate and flash.The base wil
Streszczenie treści zawartej na stronie nr. 11
7. Press the “Start/Stop” button on the base unit to stop the alarm and timer. 8. The timer will time up to 39 hours, 59 minutes and 59 seconds. (The seconds will appear when remaining time is less than one minute). 1 Clock Feature To program the clock: 1. While the base unit is off, press the “Select” button.The clock digits flash. Press “Select” 2 2 2. Press the “Hr/+” but- ton to change the hour. Press the “Min/-” button to change the minutes. Press and Press “Hr/+” and then Press “Min/-” to
Streszczenie treści zawartej na stronie nr. 12
5. Do not expose the probe directly to flames. Do not put the probe in foods to exceed cooking temperatures of 500°F (260°C), as this may reduce the life and accuracy of the thermometer sensor. 6. Do not use this thermometer in a microwave oven. 7. Moisture inside the plug-in opening of the thermometer will result in an incorrect temperature reading. Dry the sensor plug with a cloth every time before plugging it into the thermometer. 8. DO NOT USE THE CORD AND PROBE FOR OVEN TEMPERATURES HIGHER
Streszczenie treści zawartej na stronie nr. 13
Transmission Collision Signals from other household devices,such as doorbells,home security systems and entry controls, may interfere.This is normal and does not affect the general performance of this product.The transmission will resume once the interference recedes. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
Streszczenie treści zawartej na stronie nr. 14
One Year Limited Warranty Taylor® warrants this product to be free from defects in material or workmanship for one (1) year from date of original purchase for original purchaser. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this product require service (or replacement at our option), please pack the item carefully and return it prepaid, along with store
