Streszczenie treści zawartej na stronie nr. 1
INTRODUCTION
Thank you for selecting the Honeywell Wireless
Weather Forecaster with Indoor/Outdoor Thermometer.
This device includes precise time keeping, weather
forecast, alarms and temperature monitoring features
that you can enjoy from the comfort of your home.
In this package you will find:
* Main unit (receiver)
* Remote sensor (transmitter) TS13
Wireless Weather
Please keep this manual handy as you use your new
item. It contains practical step-by-step instructions, as
Forecaster
Streszczenie treści zawartej na stronie nr. 2
FEATURES A FIVE-LINE DISPLAY MAIN UNIT Allows easy reading of indoor or outdoor temperature * Precise time keeping with daily clock updates and calendar clock * Time display shows hours, minutes and seconds * Calendar display with month and date B CHANNEL SELECTOR * US time zone settings Selects different remote sensor readings (Pacific, Mountain, Central & Eastern) * Radio-controlled signal reception indicator C MEMORY [MEM] BUTTON * User-selectable 12/24 hour time format Recalls
Streszczenie treści zawartej na stronie nr. 3
REMOTE TEMPERATURE SENSOR BEFORE YOU BEGIN * Remote temperature transmission to the main unit via 1. We recommend using alkaline batteries for main unit and remote sensor. 433MHz signal 2. Avoid using rechargeable batteries. * Case can be mounted on the wall using built-in hanger 3. Insert batteries before first use, matching the polarity as * 100 feet transmission range without interference shown in the battery compartment. * LCD display of measured temperature 4. Always insert batterie
Streszczenie treści zawartej na stronie nr. 4
BATTERY INSTALLATION Always place main unit by the window for better reception. MAIN UNIT The clock will continue to search for the WWVB time The Wireless Weather Forecaster uses 2 “AA” batteries (not signal daily from 1:00am to 4:30am. If reception is included). When the LCD becomes dim or the respective successful, the time and date will be updated automatically. low battery indicator shows up on the indoor or remote 6. You may activate the WWVB receiver at any time by temperatur
Streszczenie treści zawartej na stronie nr. 5
CALENDAR CLOCK DISPLAY MODES 2. Press or to set the desired language for the weekday Both an alarm time and the calendar share the same section display. The selection sequence is: “EN” for English, of the display. The next line displays the current time with “SP” for Spanish, “FR” for French, “GE” for German, seconds and the day of the week. The calendar is displayed and “IT” for Italian. in the month and day format. If the alarm time is displayed, press MODE to display ˚C or ˚F
Streszczenie treści zawartej na stronie nr. 6
* Pre-Alarm SINGLE ALARM SETTING If the remote temperature (channel 1) is 32˚F or below, Press ALARM ON/OFF to select the single alarm. If the the pre-alarm feature will be activated. The pre-alarm alarm is disarmed, the alarm time will be displayed as time interval can be set for 15, 30, 45, 60, 75 or 90 “OFF”. If you choose not to set the SINGLE ALARM minutes before the weekday or single alarm time. press ALARM ON/OFF again to advance to the This alarm will only sound if either the weekday
Streszczenie treści zawartej na stronie nr. 7
If this does not work, please perform the following steps: USING THE ALARM AND SNOOZE 1. Bring the main unit and remote sensor close together. When the alarm sounds, press the LIGHT/SNOOZE key 2. Remove 4 a small screws from the back of the remote to temporarily stop the alarm. After depressing LIGHT/ sensor and open the battery compartment. SNOOZE, the alarm sound will resume in 5 minutes. If the 3. Remove the batteries from the battery compartment and alarm is not disabled after that, i
Streszczenie treści zawartej na stronie nr. 8
If there is no signals received from the remote sensor for WEATHER FORECAST more than 2 minutes, a dashes “ ” will be displayed. The unit is capable of detecting an atmospheric pressure Press and hold button for 2 seconds to activate an changes. Based on collected data, it forecasts the weather immediate signal search. for the next 12 to 24 hours. TEMPERATURE TREND INDICATORS The trend indicators shows the trend of indoor or outdoor Symbol Indicator temperatures collected at a pa
Streszczenie treści zawartej na stronie nr. 9
READING THE KINETIC WAVE DISPLAY * Within concrete rooms (basements, superstructures, The kinetic wave display shows the signal receiving office buildings), the received signal will be weakened, status of the main unit. There are three possible forms: and the main unit should be placed close to a window. * The successful reception of the atomic time signal depends on the positioning and location of the main unit. Always place the main unit by the window for better reception. The Unit
Streszczenie treści zawartej na stronie nr. 10
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been
Streszczenie treści zawartej na stronie nr. 11
STANDARD WARRANTY INFORMATION DECLARATION OF CONFORMITY This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover We damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Note that online product registration is required to ensure Telephone No.: 1-503-612-8395 valid warranty protection. To register your pro
