Instrukcja obsługi Robic SC-594

Streszczenie treści zawartej na stronie nr. 1

OPERATING INSTRUCTION FOR SC-594

(A) FEATURES
The SC-594 is a multi-function watch designed to have Chronograph, Count Down Timer, Alarm and Pulse Rate
Monitor. The main features are listed as follow:



S1

S4
S2




- 6 modes of operation: Normal Time, Pulse Rate Monitor, Chronograph, Timer, Alarm and Safety Range Set.
- Normal Time presents Hour, Minute, Second, Weekday, Month and D

Streszczenie treści zawartej na stronie nr. 2

The SC-594 is a simple detector meant to offer general guidance as to the Pulse Rate of a person at a given moment in time. This is not a medical device and it should not be viewed as offering any sort of physical indication, prescription, or protection. Each person makes their own decisions about their health and the information they deem of value should be obtained from a licensed Medical Professional. Above all else, refer to your Doctor or Health Care professional for guidance as to t

Streszczenie treści zawartej na stronie nr. 3

S3 S3 S3 SECOND MINUTE HOUR WEEKDAY S3 S3 S3 S3 12H/24H DATE MONTH - After all adjustments are completed, press button S2 to exit the setting mode. Remark: 1. When the seconds digits count between 30 to 59 and the button S1 is pressed while in setting mode, the seconds are reset to 00 and one minute is added. 2. If 24 Hr display format is selected, there is no AM flag “A” or PM flag “P”. 3. If there is no button operation for 2-3 minutes in setting mode, the watch will re

Streszczenie treści zawartej na stronie nr. 4

4. Button S1 is for starting or stopping the timer. 5. Button S4 is for reloading preset timer time when timer is stopped, or selecting timer function when the timer is reloaded or reset. 6. “REP” is displayed if Count Down Repeat function is selected. 7. Press button S2 to enter or exit Pulse Rate Monitor mode (H) HOW TO USE THE ALARM S1 S4 S2 S3 - Press button S3 to show Alarm mode, “AL” displayed in the bracket. - Press & hold button S2 for 3-4 seconds to en

Streszczenie treści zawartej na stronie nr. 5

3. The minimum interval between upper limit and lower limit of the safety range is 10 units. If the interval is less than 10 units, then the adjustments will be changed automatically. 4. If warning sound is turned on, the watch will beep when Pulse Rate is beyond the limits. 5. Age can be set from 1 to 99. 6. If “level -” is selected, user can set his own safety range and equated safety range is provided for “level 1” to “level 4”. 7. If there is no button operation for 2-3 minutes

Streszczenie treści zawartej na stronie nr. 6

4. Entering the Pulse Rate Monitor mode in Timer mode will enable you to use Pulse Rate measurement together with the count down timers. Pulse Rate is displayed in the upper row and count down time is displayed in the lower row. 5. An arrow pointing up or down will be displayed next to the Pulse Rate reading to indicate that the current heart rate is above the upper limit or below the lower limit of the safety range respectively. And warning sound will also be given if “Sd” is in “o

Streszczenie treści zawartej na stronie nr. 7

7