Instrukcja obsługi NuTone HEAT-A-VENTLITE 9965

Streszczenie treści zawartej na stronie nr. 1

INSTALLATION INSTRUCTIONS
READ & SAVE THESE INSTRUCTIONS!
®
3
Heat-A-Ventlite
9 ⁄4"
(with Night Light)
MODEL: 9965 3
7 ⁄4"
FOR BEST RESULTS
In a new construction site, install the housing (complete
with heater and ventilator) during rough-in construction of the
building. The light assembly and the grille should be installed
14"
when the finished ceiling is in place.
Installation in an existing, finished building requires an
accessible area (attic or crawl space) above the planned
location. See “

Streszczenie treści zawartej na stronie nr. 2

GROUND WHITE BLACK MOUNTING THE HOUSING MOUNTING THE GRILLE ASSEMBLY 1. Locate housing between joists. 1. Refer to Figure 7. Place the reflector into the grille. 2. Refer to Figure 5. Using nails, secure hanger bars to joist. 2. Refer to Figure 8. Insert light plug and night light plug into NOTE: The hanger bar brackets are adjustable. receptacles. Allowing for the thickness of the finished ceiling, 3. Refer to Figure 7. Using two provided screws, secure mount hanger bars so that edge of housing

Streszczenie treści zawartej na stronie nr. 3

INSTALLATION IN EXISTING CONSTRUCTION In an existing, finished building, installation of the Heat- Vent-Light Combination requires an accessible area (attic or crawl space) above the planned location. If the location that has been chosen for installation has a finished floor above it, be certain there is sufficient space available to install the housing and make the necessary duct connection. PLANNING Review “INSTALLATION IN NEW CONSTRUCTION” and follow all instructions that apply. CAUTION: Chec

Streszczenie treści zawartej na stronie nr. 4

One Year Limited Warranty WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one (1) year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. During this one year period, NuTone will, at its option, repair or replace, without charge, any

Streszczenie treści zawartej na stronie nr. 5

EFFECTIVE PRODUCT MODEL NUMBER DATE GROUP PARTS LIST MAY 9965 HEATER 1999 REVISED 4 10 11 5 13a 9 3 12 7 6 14 15 8 9 2 13 16 17 18 24 19 1 21 VENT HEAT 20 NIGHT LIGHT LIGHT 22 23 NOT A PARTS DEPT. STOCK ITEM REF. ORIGINAL *PART DESCRIPTION REPLACEMENT NO. PART NO. PART NO. 1 K3132 BEZEL/LENS ASSEMBLY 89340-000 2 K9010 GRILLE 89339-000 3 K3135 REFLECTOR 89375-000 4 K3136 SOCKET-LARGE 35758-000 5 K3137 SOCKET-SMALL W/CLIP 35759-000 6 K3097 RECEPTACLE-BLACK 66204-000 7 K3160 RECEPTACLE-BLUE WIRE

Streszczenie treści zawartej na stronie nr. 6

GROUND WHITE BLACK REF. ORIGINAL *PART DESCRIPTION REPLACEMENT NO. PART NO. PART NO. 11 K3010 HANGER ROD ASSEMBLY (1) 2 Required 85585-000 12 K3117 "B" UNIT ASSEMBLY-VENT 86693-000 13 K3122 BLOWER WHEEL 82403-000 13a 82404 PUSH NUT 82404-000 14 K3121 MOTOR (VENT) 89321-000 15 K3118 SCROWL (PLASTIC) 2908A-000 16 K3102 "B" UNIT ASSEMBLY (HEAT) 89306-000 17 K3111 BLOWER WHEEL (HEAT) 66583-000 18 K3110 MOTOR (HEAT) 89315-000 19 K3112 MOTOR BRACKET 23255-000 20 K3360 THERMAL PROTECTOR 1179A-000 21