Instrukcja obsługi ATD Tools ATD-6903

Streszczenie treści zawartej na stronie nr. 1

ATD-6903
1.0MM TOUCH UP GUN W/CUP
INSTRUCTION MANUAL
Read this manual carefully and understand it completely.
Retain Manual for future use.
Always follow safety precautions to prevent personal injury and/or damage
to the equipment.
Illustrations and photos are intended for reference only. Actual product may vary.
Specifications are subject to change without notice.
Important Safety Instructions
1. Always wear eye protection, gloves and respirator to prevent against harmful
vapors whil

Streszczenie treści zawartej na stronie nr. 2

Operating Instructions POWER SOURCE This tool operates best on a clean, dry supply of compressed air delivered at 29 to 50 psi. Use of a moisture trapping air filter is highly recommended as moisture or foreign matter can damage the internal parts of this tool. CAUTION: All air pressure in the system should be rated at 29 to 50 psi. Higher or lower pressure can adversely influence the operation or cause damage to this tool. NOTE: To maintain a maximum 10 PSI at the nozzle, use a maximum of

Streszczenie treści zawartej na stronie nr. 3

Figure 3 – INCORRECT Figure 4 – CORRECT 3

Streszczenie treści zawartej na stronie nr. 4

ADJUSTMENT 1. Fine-tune the gun to your desired working settings of spray patters, fluid output and degree of paint atomization using the three controls illustrated in Figure 5. Figure 5 Maintenance To clean the gun, pour any leftover paint back into its container. Using thinner, clean out the paint cup and cap. Spray some thinner through the gun to clean the spray head, needle and nozzle. Spray until thinner comes out clean. Clean all paint

Streszczenie treści zawartej na stronie nr. 5

5