Instrukcja obsługi Poulan 960 72 00-08

Streszczenie treści zawartej na stronie nr. 1

OWNER’S MANUAL
Model QCT348
Mfg. ID No. 96072000800
Product No. 960 72 00-08
48 Inch Mower
Grass Catcher
 Assembly
 Operation
 Customer Responsibilities
 Repair Parts
402345 Rev. 1 12.19.05 rad
Printed in U.S.A.
03021

Streszczenie treści zawartej na stronie nr. 2

SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.  Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. These operators should evaluate their ci den tal starting when setting up, abilit

Streszczenie treści zawartej na stronie nr. 3

SAFETY RULES Safe Operation Practices for Ride-On Mowers  If you strike a foreign object, stop and inspect the IV. TOWING machine. Repair, if necessary, before restarting.  Tow only with a machine that has a hitch designed for  Never make any adjustments or repairs with the engine towing. Do not attach towed equipment except at the running. hitch point.  Follow the manufacturer's recommendation for weight  Check grass catcher components and the discharge limits for towe

Streszczenie treści zawartej na stronie nr. 4

KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign obje

Streszczenie treści zawartej na stronie nr. 5

ASSEMBLY 3. Align support assembly pin with hole in drawbar and BAGGER SUPPORT ASSEMBLY hang assembly over the shoulder bolts. 1 4. Be sure support assembly is seated properly and secure Determine which type drawbar you have on your tractor. with retainer spring supplied. Compare the drawbar illustrations below to the drawbar SHOULDER located at the rear of your tractor. BOLTS Follow the support assembly instructions that apply to your type drawbar. SUPPORT ASSEMBLY DRAWBAR

Streszczenie treści zawartej na stronie nr. 6

MOUNTING COVER ASSEMBLY TO CONTAINER ASSEMBLY (See Fig. 3) 2 SUPPORT ASSEMBLY (See Fig. 2) 3 NOTE: For ease of assembly, you may wish to obtain the 1. Place bottom half inside of top half, as shown. as sis tance of another person for mounting cover assembly to tractor. 2. Place one foot inside bottom half and lift top half to meet bottom half. 1. Position cover assembly on ground behind tractor. 3. Press halves tightly together while lifting top to lock 2. Lift and rotate cover

Streszczenie treści zawartej na stronie nr. 7

03022 CONTAINER MOUNTING (See Fig. 4) UPPER CHUTE (See Figs. 6A & 6B) 4 6 1. Lower mower to its lowest cutting position. 1. Install one container to left side fi rst with warning to outside of unit. Install another container to center 2. Assemble upper chute by inserting curved end into position and one in right position. hole in back of cover. NOTE: Right con tain er should always over lap left con tain er NOTE: Handle carefully so as not to damage full bagger at center supports.

Streszczenie treści zawartej na stronie nr. 8

OPERATION  Avoid cutting wet grass or in the morning while the dew TIPS FOR IMPROVED BAGGING is still heavy. Grass clippings collected under these OPE RATION: conditions tend to be sticky and adhere to the walls of Follow the mower operation instructions in your tractor the fl ow path causing clogging. owner's manual.  Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fi ll. The When operating your grass catcher on a lawn where grass

Streszczenie treści zawartej na stronie nr. 9

CUSTOMER RESPONSIBILITIES STORAGE GENERAL RECOMMENDATIONS When grass catcher is to be stored for a period of time, Always observe safety rules when performing any main- clean it thoroughly, remove all dirt, grass, leaves, etc. Store te nance. in a clean, dry place.  Before each use check for loose fasteners.  Clean unit thoroughly after each use. CAUTION: Do not leave grass in bagger containers. Empty containers after each BLADE CARE use and before storing. Failure to do so may

Streszczenie treści zawartej na stronie nr. 10

cracked or damaged. Use only a recommended replacement container. subject to wear and detierioration.Check bag frequently. Replace when Do not operate mower unless container is properlyis nstalled.Container is WARNING 10 REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL QCT348 (MFG. ID 96072000800) / RAMASSE-HERBE - MODÈLE QCT348 (MFG. ID 96072000800) PRODUCT NO. 960 72 00-08 / NUMÈRO DE PRODUIT 960 72 00-08 4 5 6 7 8 10 12 9 13 2 9 11 14 2 18 20 38 15 38 20 34 15 9 20 12 37 14 3 20 33 26 3

Streszczenie treści zawartej na stronie nr. 11

11 REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL QCT348 (MFG. ID 96072000800) / RAMASSE-HERBE - MODÈLE QCT348 (MFG. ID 96072000800) PRODUCT NO. 960 72 00-08 / NUMÈRO DE PRODUIT 960 72 00-08 KEY PART DESCRIPTION KEY PART DESCRIPTION NO. NO. NO. NO. 1 532401047 Adapter Côtés 15 532160793 Latch, Hook Crochet de loquet 2 532069180 Nut, Crown lock #10-24 Écrou auto-serrant #10-24 18