Streszczenie treści zawartej na stronie nr. 1
Operator and
Parts Manual
Grass Bagger
Dixon SpeedZTR 36"
Kit 539 131305
Streszczenie treści zawartej na stronie nr. 2
CONGRATULATIONS on your purchase of a new KNOW YOUR GRASS BAGGER Grass Bagger. It has been designed, engineered and READ THIS OPERATION MANUAL AND THE manufactured to give you the best possible depend- SAFETY RULES BEFORE ASSEMBLING OR ability and performance. OPERATING YOUR GRASS BAGGER. Compare Should you experience any problem you cannot the illustrations with the carton contents to familiar- easily remedy, please contact your nearest autho- ize yourself with the parts before starting the ass
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS SAFETY RULES ....................................................................................................................... 4-6 CARTON CONTENTS ..................................................................................................................7 ASSEMBLY .......................................................................................................................... 8 - 10 OPERATION ...............................................................
Streszczenie treści zawartej na stronie nr. 4
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DANGER ! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OB- JECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERI- OUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand and follow all instructions in • Keep machine free of grass, leaves or other the manual and on the machine before starting. debris buildup which can touch hot exhaust/ • Only allow responsible adults, who are fami
Streszczenie treści zawartej na stronie nr. 5
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DO NOT IV. SERVICE • Do not turn on slopes unless necessary, and • The operation of any mower can result in foreign then, turn slowly and gradually downhill, if objects thrown into the eyes, which can result in possible. severe eye damage. Always wear safety glasses or eye shields while operating your mower or • Do not mow near drop-off, ditches, or embank- performing any adjustments or repairs. We ments. The mower could suddenly turn over
Streszczenie treści zawartej na stronie nr. 6
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS • NEVER allow children to operate the ma- chine. CAUTION • Be sure the area is clear of other people before In order to prevent accidental starting mowing. Stop machine if anyone enters the area. when setting up, transporting, adjusting or • Never carry passengers or children even with the making repairs, always disconnect spark blades off. plug wire and place wire where it cannot • Do not drive in reverse unless absolutely neces- contact
Streszczenie treści zawartej na stronie nr. 7
UNPACKING INSTRUCTIONS CARTON 1 CONTENTS • Remove all parts and packing materials from both 1 - Upper Chute 1 - Owner’s Manual cartons. 1 - Flex Hose 1 - Hanger Bracket 1 - Bagger Support 1 - Weight Kit • Check carton contents against list. Be sure all 2 - High Lift Blades 1 - Hose Clamp parts are there. 2 - Support Straps 1 - Cast Weight 1 - Weight Box 1 - Baffle 1 - Discharge Adapter 1 - Decal 1 - Discharge Mount Bracket CARTON 2 CONTENTS 1 - Cover Assembly 2 - Soft Bag Containers PARTS IDENTI
Streszczenie treści zawartej na stronie nr. 8
ASSEMBLY CHANGING BLADES DISCHARGE ADAPTER 1 2 1. Reinstall deck to machine. Refer to Operator's WARNING! Manual, if necessary. Blades are sharp. Protect your 2. Remove grass deflector from mower deck by hands with gloves and/or wrap pulling hairpin cotter and deflector pin. blades with a heavy cloth when 3. Position discharge adapter assembly on deck. handling. Run deflector pin through the deflector spring and the mounting brackets on the deflector and mower deck. Slip spring end through lock
Streszczenie treści zawartej na stronie nr. 9
ASSEMBLY BAGGER SUPPORT ASSEMBLY MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY 3 4 1. Attach bagger support to engine guard using four NOTE: For ease of assembly, you may wish assis- 3 3 /8 -16 x ¾ bolts and four /8 -16 nyloc nuts. tance from another person for mounting the cover 11 assembly to mower. 2. Using bagger support as a template, drill two /32 holes through the engine guard toward the 1. Position cover assembly on ground behind mower. bottom. (See illustration) 2. Lift and rotate cover t
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLY UPPER CHUTE FRONT WEIGHTS 6 7 1. Attached flex tube to blower and secure with the 1. Center the weight box on the front face of foot hose clamp. plate, as illustrated. Use the holes in weight box 11 as a template to mark and drill four /32" diameter 2. Slide opposite flex hose end into upper chute. holes in foot plate. 3. Push upper chute through the gasketed opening 2. Attach the weight box to foot plate with four in the cover assembly. 5 5 /16-18 x ½" carriage bolts and /16" nyloc nu
Streszczenie treści zawartej na stronie nr. 11
OPERATION TIPS FOR IMPROVED BAGGING OPERATION Follow the mower operation instructions in your mower • Avoid cutting wet grass or in the morning while operator’s manual. the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and When operating your grass bagger on a lawn where adhere to the walls of the flow path causing grass and leaf bagging equipment has not been used, clogging. you are picking up thatch and debris that has accumu- lated for long periods of
Streszczenie treści zawartej na stronie nr. 12
CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS STORAGE Always observe safety rules when performing any When grass bagger is to be stored for a period of time, maintenance. clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place. • Before each use check for loose fasteners. • Clean unit thoroughly after each use. BLADE CARE For best results mower blades must be kept sharp. Replace bent or damaged blades. • See BLADE CARE instructions in your mower CAUTION operator
Streszczenie treści zawartej na stronie nr. 13
PARTS 8 2 9 11 4 9 9 9 10 7 8 5 8 6 3 14 1 12 13 15 ITEM P/N QTY. DESCRIPTION ITEM P/N QTY. DESCRIPTION 5 1 .. 532 124670 .... 1... RETAINER SPRING 9 .. 539 991034 .... 8 ... 10-24 x /8 WASHER HD ZD 2 .. 532 127533 .... 1 ... SCREEN, COVER 10 .. 532 414173 .... 1... STRIP, REINFORCEMENT 3 .. 539 108100 .... 1 ... GASKET, COVER 11 .. 532 160274 .... 1 ... COVER TOP 4 .. 532 130895 .... 1... LATCH. HANDLE, COVER 12 .. 532 174083 .... 3 ... CAP PLUG TUBING END 5 .. 532 132796 .... 1... SPRING COVER
Streszczenie treści zawartej na stronie nr. 14
PARTS 8 7 4 5 11 1 5 9 6 2 14 20 10 3 25 6 19 5 23 22 24 17 18 6 15 16 16 6 13 12 14
Streszczenie treści zawartej na stronie nr. 15
PARTS ITEM P/N QTY. DESCRIPTION ITEM P/N QTY. DESCRIPTION 5 14 .. 539 990209 .... 2... HCS /16-18 x 1 GR 5 ZD 1 .. 539 131279 .... 1... SUPPORT - BAGGER 3 5 15 .. 539 990188 .... 2... WASHER, /16, SAE 2 .. 539 990134 .... 4... HCS /8-16 x ¾ GR 5 ZD 3 5 16 .. 539 990316.... 6... RHSNB, /16 -18 X ¾, GR5 3 .. 539 976979 .... 4... NUT /8-16 HEX NYLOC ZD 17 .. 539 115243 .... 1 ... BAFFLE 4 .. 539 131277 .... 1... BRACKET, HANGER 5 18 .. 539 116715..... 1... DISCHARGE MOUNT BRCKT 5 .. 539 990208 ....
Streszczenie treści zawartej na stronie nr. 16
539 131613 IR 08/15/07
