Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Sewing Application ........................................... 102 GETTING READY TO SEW.......................... 2 Correcting Distorted Stitch Patterns .............. 117 Name of Parts ...................................................... 2 Standard Accessories and Storage ...................... 4 EMBROIDERY ................................................. 118 Detachable Extension Table................................. 6 Preparation for Embroidery ...........................
Streszczenie treści zawartej na stronie nr. 3
GETTING READY TO SEW Name of Parts 1 2 3 4 56 24 7 8 23 22 9 21 10 11 20 12 19 27 29 26 28 18 16 15 17 14 13 30 25 30 1 Top Cover 16 Extension Table (Accessory Box) 2 Spool Pin 17 Hook Cover Plate Release Button 3 Spool Holder (Large) 18 Hook Cover Plate 4 Foot Storage Compartment 19 Needle Plate 5 Bobbin Thread Cutter 20 Automatic Needle Threader 6 Bobbin Winder Spindle 21 Thread Cutter & Thread Holder 7 Bobbin Winder Stopper 22 Face Plate 8 Visual Touch Screen 23 Pressure Dial
Streszczenie treści zawartej na stronie nr. 4
1 2 14 3 13 4 18 5 6 12 17 7 8 15 11 10 9 16 1 Carrying Handle 16 RS-232C Connector 2 Thread Take-Up Lever 17 USB Connector 3 Presser Foot Lifter 18 PC Design Card (Optional item) 4 Buttonhole Lever 5 Needle Clamp Screw 6 Free Arm 7 Drop Feed Lever 8 Presser Foot and Holder 9 Carriage (For Embroidery) 10 Power Switch 11 Machine Socket 12 Card Eject Button 13 PC Card Slot 14 Handwheel 15 Connector Cover 3
Streszczenie treści zawartej na stronie nr. 5
Standard Accessories and Storage 2 1 3 1 Embroidery Hoop (A) (With Template) 2 Embroidery Hoop (B) (With Template) 4 3 Foot Control 4Knee Lifter 5Template Sheets (for Built-in Designs) 6 Power Supply Cord 5 6 7 Hard Cover (Carrying Case) 7 8 Automatic Buttonhole Foot R 14 8 9 9 Satin Stitch Foot F 10 Embroidery Foot P 10 11 Zigzag Foot A (comes attached to the machine) 12 Blind Hem Foot G 13 Overedge Foot C 14 Foot Holder (comes attached to the machine) 13 11 12 4
Streszczenie treści zawartej na stronie nr. 6
1 2 1 1/4˝ Seam Foot O 2 Cording Foot H 3 4 3 Rolled Hem Foot D 4 Zipper Foot E 5 6 5 Overcasting Foot M 6 Button Sewing Foot T 8 7 7 Walking Foot 8 Screwdriver 9 Set of Needles 9 10 10 Quilting Bar for Walking Foot 11 Scissors 11 12 12 Spool Pin Felt 13 Lint Brush 13 14 14 Additional Spool Pin 16 15 15 Seam Ripper 16 Spool Holder (Small) 18 17 17 Bobbins 18 Button Shank Plate 19 Cloth Guide 20 19 20 Basting/Darning Foot P-2 21 Quilting Bar 22 Instruction Book 21 22 23 Instruc
Streszczenie treści zawartej na stronie nr. 7
Detachable Extension Table 1 For Free Arm sewing To remove, lift out the Extension Table toward you as illustrated. 1 Extension Table Free Arm sewing can be used for: - stitching sleeves, waistbands, pants legs or any tubular garment area. - darning socks or mending knees, elbows or children’s wear. For Flat-bed sewing 2 Position the Tabs on the Base Tab Holes and push down gently. 2Tabs 3 Base Tab Holes 3 6
Streszczenie treści zawartej na stronie nr. 8
Connecting the Power Supply The Memory Craft 10001 is equipped with 1 an auto voltage system, which automatically adjusts the equipment to any local power supply voltage between 100 and 240V, 50/ 60Hz. Turn off the Power Switch, insert the Foot 3 Control Plug and Machine Plug into the machine, then Power Supply Plug into the 5 wall outlet in this order. Turn on the Power Switch. 2 1 Power Switch 2 Foot Control Plug 3Machine Plug 4 Power Supply Plug 5 Power Supply Cord 6 Foot Control 4 6 NOTES:
Streszczenie treści zawartej na stronie nr. 9
Machine Operating Buttons 1Start/Stop Button Press this button to start or stop the machine. This button can be used either in Ordinary Sewing Mode or Embroidery Mode. In Ordinary Sewing Mode, the machine starts running slowly for the first few stitches, it then runs at the speed set by the Speed Control Lever. 6 NOTE: • The Start/Stop Button cannot be used when the foot control is connected to the machine. 2 Reverse Button Patterns 1, 2, 8 and 9: The machine will sew in reverse while the Revers
Streszczenie treści zawartej na stronie nr. 10
Controlling Sewing Speed Speed Control Lever You can limit the sewing speed by the Speed Control Lever according to your sewing needs. To increase sewing speed, slide the lever to the right. To decrease sewing speed, slide the lever to the left. Foot Control Sewing speed can be varied by pressing on the Foot Control. The harder you press the Foot Control, the faster the machine runs. NOTE: • The machine runs at the maximum speed set by the Speed Control Lever when the foot control is being full
Streszczenie treści zawartej na stronie nr. 11
Winding the Bobbin 1 Removing the bobbin Slide the Hook Cover Plate Release Button to the right, and remove the Hook Cover Plate. Lift out the Bobbin from the Bobbin Holder. 2 1 Hook Cover Plate Release Button 2 Hook Cover Plate 3 Bobbin 3 Setting the spool of thread Lift up the Spool Pin. Place the spool of 4 5 thread on the Spool Pin with the thread coming off the spool as shown. Attach the Large Spool Holder, and press it firmly against the spool of thread. NOTE: • Use the Small Spool Holder
Streszczenie treści zawartej na stronie nr. 12
Threading for Bobbin Winding 2 Hold the upper thread with both hands and place it downward into the Slit. Guide the thread around the Thread Guide following the dashed blue line as shown in 3 4 the diagram. 1 1Slit 2 Thread Guide Thread through the hole in the Bobbin from the inside to the outside. Put the Bobbin on the Bobbin Winder Spindle, and push it to the right. 3 Bobbin 4Bobbin Winder Spindle The Visual Touch Screen shows “Bobbin Winding”. Hold the free end of the thread in your hand and
Streszczenie treści zawartej na stronie nr. 13
Inserting the bobbin Place the Bobbin in the Bobbin Holder with the Thread running off in the counterclockwise direction. 1 Thread 1 Guide the thread into Front Notch on the front of the Bobbin Holder. Draw the thread to the left, sliding it between the tension spring blades. 2 Front Notch 2 12
Streszczenie treści zawartej na stronie nr. 14
Continue to draw the thread lightly until the thread slips into Side Notch. 1 Side Notch 1 Pull out about 10 cm (4˝) of thread to the rear. 2 Refer to the Threading Chart shown on the Hook Cover Plate. Reattach the Hook Cover Plate. 2 Threading Chart 13
Streszczenie treści zawartej na stronie nr. 15
Threading the Machine 2 Raise the Presser Foot Lifter. Press the Up/Down Needle Button to raise the needle to its highest position. 4 Hold the upper thread with both hands as 3 shown and place it downward into the Slit. 5 1 6 Draw the thread around the Thread Guide following the solid yellow line as shown in the diagram. 1Slit 2 Thread Guide Then draw the thread down around the Check Spring Holder. Firmly draw the thread up to the Take-up Lever and down into its eye from the right to the left. 3
Streszczenie treści zawartej na stronie nr. 16
Using the Automatic Needle Threader 1 1 Hold the end of the needle thread gently. NOTE: • Make sure to raise the needle by pressing the Up/Down Needle Button. 2Press the Auto Needle Threader 2 Button. The threader lowers automatically and the hook comes out through the needle eye from behind it. 3 Pull the thread down around the Thread 3 Guide, then pass the thread from the right and under the Hook as shown. 1 Thread Guide 2 Hook NOTE: • The Visual Touch Screen will show 1 step-by-step instruc
Streszczenie treści zawartej na stronie nr. 17
5 Press the Auto Threader Button again. 5 The threader goes up automatically and pulls the thread out through the needle eye. Pull the loop of thread to the back. NOTES: • The Automatic Needle Threader works well on the needles Nos.11-14, sewing threads Nos.60-120 and Janome embroidery threads. • Thick threads, Nos. 20 and 30, cannot be used. CAUTION: • To use the Automatic Needle Threader properly, always make sure to pay attention the following instructions. • Do not turn the handwhe
Streszczenie treści zawartej na stronie nr. 18
Drawing Up the Bobbin Thread Raise the Presser Foot. Hold the needle thread with your fingers and press the Up/Down Needle Button twice to pick up the bobbin thread. Draw up the needle thread to bring up a loop of the bobbin thread. Slide 10 cm (4˝) of both threads to the back under the Presser Foot. 17
Streszczenie treści zawartej na stronie nr. 19
Changing Needles 1 Raise the needle by pressing the Up/Down Needle Button and lower the Presser Foot. 3 Turn off the Power Switch. Loosen the Needle Clamp Screw by turning it counterclockwise. Remove the Needle from the Needle Clamp. 1 Needle Clamp Screw 2 Needle 3Needle Clamp 2 Insert a new needle into the Needle Clamp 3 with the Flat Side of the Needle to the rear. When inserting the Needle into the Needle Clamp, push it up as far as it will go and 4 tighten the Needle Clamp Screw firmly. 4Fl
Streszczenie treści zawartej na stronie nr. 20
Selecting a needle For general sewing, use needle size 11 or 14. A fine thread and needle should be used for sewing lightweight fabrics, so the fabric will not be marred. Heavy fabrics require a needle large enough to pierce the fabric without fraying the needle thread. In the needle case you will find one size 14, three blue tipped needles and one twin needle. Use a blue tipped needle to eliminate skipped stitches when sewing knits and synthetic fabrics. There are also specialty needles availab
