Streszczenie treści zawartej na stronie nr. 1
USER’S MANUAL
SMOOTH CE-3.0 ELLIPTICAL TRAINER
USER WEIGHT LIMITATION: 350lbs(160kgs).
SERIAL NUMBER (found on frame):
REV 12/27/11
Streszczenie treści zawartej na stronie nr. 2
2 SMOOTH CE3.0 ELLIPTICAL TRAINER PREASSEMBLY For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness Elliptical Trainer. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in th
Streszczenie treści zawartej na stronie nr. 3
3 www.smoothfitness.com COMPLETE PARTS LIST Part Number Name&specification Qty CE-30i-1 computer 1 CE-30i-2 computer screw 4 CE-30i-3 handlebar end cap 2 CE-30i-4 handlebar tube 1 CE-30i-5 Fixed handlebar foam 2 CE-30i-6 handle pulse 2 CE-30i-7 handle pulse line 2 CE-30i-8 curved washer OD20*ID8.5*1.5T 2 CE-30i-9 Inner hexagon M8*20 Screw 30 CE-30i-10 console support tube 1 CE-30i-11 fixed handlebar cover-R 1 CE-30i-12 fixed handlebar cover-L 1 CE-30i-13 screw M4*20 17
Streszczenie treści zawartej na stronie nr. 4
4 SMOOTH CE3.0 ELLIPTICAL TRAINER COMPLETE PARTS LIST Part Number Name&specification Qty CE-30i-36 main frame cover fixing plate 10 CE-30i-37 screw M4*20 3 CE-30i-38 cover –Right 1 CE-30i-39 main frame cover front cover 1 CE-30i-40 motor 1 CE-30i-41 motor cable 1 CE-30i-42 M10*1.5*10T nut 13 CE-30i-43 C style button ( ∮12) 2 CE-30i-44 Flat washer OD20*ID10.5*2.0T 14 CE-30i-45 flywheel axes 1 CE-30i-46 6001 bearing 2 CE-30i-47 flywheel 1 CE-30i-48 Magnetic assembly 1 CE
Streszczenie treści zawartej na stronie nr. 5
5 www.smoothfitness.com COMPLETE PARTS LIST Part Number Name&specification Qty CE-30i-71 pedal axle sleeve 2 CE-30i-72 power cable 1 CE-30i-73 sensor wire 1 CE-30i-74 roller track support cover –middle 1 CE-30i-75 aluminum roller track 2 CE-30i-76 roller track cover –rear 1 CE-30i-77 roller track support tube 1 CE-30i-78 screw M10*68 2 CE-30i-79 Spring washer M10*2.0T 2 CE-30i-80 Arc washer OD20*ID10.5*2.0T 2 CE-30i-81 crank arm -right 1 CE-30i-82 screw M10*25 8 CE-30
Streszczenie treści zawartej na stronie nr. 6
6 SMOOTH CE3.0 ELLIPTICAL TRAINER PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 4 107 8 7 15 9 1 2 20 13 18 12 9 13 10 11 15 14 13 31 16 33 34 58 2122 17 57 28 13 89 54 13 44 82 18 99 100 2221 44 32 42 9 15 13 31 1415 9 101 58 102 89 80 42 82 54 79 83 21 76 21 44 74 57 21 88 13 44 105 42 14 15 9 85 101 102 78 77 105 9 15 8
Streszczenie treści zawartej na stronie nr. 7
7 www.smoothfitness.com PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Streszczenie treści zawartej na stronie nr. 8
8 SMOOTH CE3.0 ELLIPTICAL TRAINER ASSEMBLY STEP 1: Attach the Rear Roller Track Support Tube Cover and Transport Handle (A) Attach the rear stabilizer cover to the roller track support tube (77) and secure with 4x M5*16(21) screws. (B) Insert the transport handle through the top of rear stabilizer cover, then secure it with 2x M8*20(9) screws, 2 x M8*2.0T(15) spring washers and 2 x OD20*ID8.5*1.5T (8) curved washers. (C) Tighten all bolts and screws now.
Streszczenie treści zawartej na stronie nr. 9
9 www.smoothfitness.com ASSEMBLY STEP 1: Attach the Roller Track Support Tube to the Main Frame (A) Attach the roller track support tube (77) to the main frame (60) and secure with 2 x M10*68(78) bolts, insert the bolts through the frame then attach 2x OD20*ID10.5*2.0T curved washers (80), 2 x M10*2.0T spring washers (79), and 2 x M10*1.5*10T nut (42). Tighten the bolts now. (B) Place the middle roller track support tube cover –middle (74) over the roller track support tube (
Streszczenie treści zawartej na stronie nr. 10
10 SMOOTH CE3.0 ELLIPTICAL TRAINER ASSEMBLY STEP 2: Attach the Action Handlebars and Covers (A) Slide the right handlebar on to the action handlebar axle. Secure the action handlebar to the axle with 1 x M8*2.0T bolt (9), 1 x M8*2.0T spring washer (15) and 1 x OD22*ID8.5*2.0T flat washer (32). Tighten all bolts now (B) Place the front and rear action handle bar covers around the pivot joint and secure with 1 x M8*20(13) screw (C) Repeat the above process for the left side
Streszczenie treści zawartej na stronie nr. 11
11 www.smoothfitness.com ASSEMBLY STEP 3: Attach the Left and Right Pedal Arms, Connecting Tubes and Covers (A) Rotate the crank arm of the elliptical so the pedal arm (88) can be attached to the crank arm. (see diagram 4a and 4b) (B) Secure the right pedal arm to the crank arm with 1 x OD20*ID10.5*2.0T flat washer (44) and M10*1.5*6.35T Nut (89) Tighten all bolts now. (C) Attach the connecting tube (56) to the right action handlebar (28) (see diagram 4c).Secure the arm with 2 x
Streszczenie treści zawartej na stronie nr. 12
12 SMOOTH CE3.0 ELLIPTICAL TRAINER ASSEMBLY STEP 4: Attach the Left and Right Pedals (A) Place the right pedal on the pedal plate (located on the pedal arm). Insert the 4 x M10*25(82) bolts trough the pre drilled holes in the pedal and the pedal plate. Then secure the bolts with 4 x OD20*ID10.5*2.0T Flat washers (44) and 4 x M10*1.5*10T Nuts (42) (B) Tighten all nuts and bolts now (C) Repeat the above processes for the left side 82 83 82 100 44 42 99
Streszczenie treści zawartej na stronie nr. 13
13 www.smoothfitness.com ASSEMBLY STEP 5: Attach the Console Support Tube Caution: Pinch point. Do not pinch the wires between the frame. (A) Connect the Computer Wire – Upper (16) to the Computer Wire – Lower (17) (be certain that the connectors are properly connected) (B) Push the extra computer wire in to the console support tube. Line up the 4 bolt holes on the console post with the 4 bolt holes on the main frame. (be certain the console support is facing the correct
Streszczenie treści zawartej na stronie nr. 14
14 SMOOTH CE3.0 ELLIPTICAL TRAINER ASSEMBLY STEP 6: Attach the tube Cover (A) Separate the split end of the post cover (34) and put the cover around the console support tube (B) Slide the cover down to the main cover. (C) Push the split ends together and insert the retaining clip (33) into the slots on the tube cover. 33 34
Streszczenie treści zawartej na stronie nr. 15
15 www.smoothfitness.com ASSEMBLY STEP 7: Assemble Console Back Cover Caution: Do not Pinch the wires between the frame (A) Feed the Hand pulse wires (7) through the hole in the computer post (10) until they extend through the top of the computer post. Do not pull on the wire as they may disconnect from the hand pulse sensors. (B) Line up the bolt holes on the handle bars (7) with the holes on the computer post (10) (C) Secure the handle bar to the computer post with 4 x M8*20 bo
Streszczenie treści zawartej na stronie nr. 16
16 SMOOTH CE3.0 ELLIPTICAL TRAINER ASSEMBLY STEP 9: Attach the Computer Monitor (A) Connect the Computer wire Upper (16) to the computer monitor wire (A). Be certain the wires are facing the proper direction and that the connectors lock in place. (B) Connect the two heart rate wires (7) with the two heart rate wire (B). Be certain the wires are facing the proper direction and that the connectors lock in place. (C) Line up the four screw holes on the computer monitor(1) with the fo
Streszczenie treści zawartej na stronie nr. 17
17 www.smoothfitness.com ASSEMBLY STEP 7: ATTACH THE COMPUTER POST COVERS (A) Place the left (12) and right (11) covers around the computer post (see picture below for proper direction) (B) Secure the two covers together with 3 x M4*20 screws (13). ASSEMBLY IS NOW COMPLETE. DOUB:E CHECK THAT ALL BOLTS AND FASTENERS HAVE BEEN PROPERLY TIGHTENED. 13 11 12 10
Streszczenie treści zawartej na stronie nr. 18
18 SMOOTH CE3.0 ELLIPTICAL TRAINER LEVEL ADJUSTMENT LEVEL ADJUSTMENT: To adjust the levelers follow these instructions: There are 6 levelers (3 on each side) You will need someone to help you with this procedure, as you will need to tip elliptical trainer while adjusting the levelers Tilt the elliptical trainer to the left/right. You will then see the LEVEL ADJUSTERS. These will need to be screwed either in or out to level the elliptical trainer. Repeat for the other side.
Streszczenie treści zawartej na stronie nr. 19
19 www.smoothfitness.com TRANSPORT INSTRUCTION TRANSPORT INSTRUCTIONS: To transport your elliptical trainer simply lift the back end and roll it away to the desired location. Wheel location Transport handle
Streszczenie treści zawartej na stronie nr. 20
20 SMOOTH CE3.0 ELLIPTICAL TRAINER COMPUTER OPERATION
