Instrukcja obsługi Tascam cdrw 402

Streszczenie treści zawartej na stronie nr. 1

D00631600A
TASCAM CD-RW402 Quick Start guide
This quick start guide is designed to help you with some of the special operations that dem-
onstrate the unique features of the CD-RW402.
Naturally, it cannot pretend to be a comprehensive guide to all the facilities provided on
this equipment, but we hope that it will serve its purpose in getting you started with the
CD-RW402 and giving you some ideas of the capabilities of the unit.
Before you get going
There are some commonsense precautions which

Streszczenie treści zawartej na stronie nr. 2

TASCAM CD-RW402 Quick Start guide Copying discs (disc at once) 1 Insert the source disc into drive 1 and a blank recordable disc.into drive 2 Close both drive trays. 2 Press the DISC COPY key. The display shows DISC AT ONCE/ COPY> DAO if DISC AT ONCE COPY> DAO a data disc is being copied. NOTE that the procedure for audio discs is slightly different—see the manual for details. 3 Press the MULTI DIAL (2). Turn the MULTI DIAL (2) to select the copy CopySpeed>x4 speed (1x, 2x or 4x). Push the

Streszczenie treści zawartej na stronie nr. 3

TASCAM CD-RW402 Quick Start guide 2 Turn the MULTI DIAL to select the TOC edit- ing options, and push it to carry out the operation. TOC EDIT Sometimes you may need to confirm the operation by pressing the MULTI DIAL again. 3 Divide a track into two at the current Track 2 Track 2 Track 3 position. DIVIDE 4 Combine two tracks. Track 5 Track 6 Track 5 COMBINE 5 Erase a track from the TOC Track 9 Track 10 Track 11 Track 9 Track 10 ERASE TRACK 6 Move the start of the track or the end of the Trac

Streszczenie treści zawartej na stronie nr. 4

TASCAM CD-RW402 Quick Start guide How do I…? restart playback from the point where I last started? On drive 1 and drive 2, you press the CALL key. This will locate the playback position from which playback last started, and enter ready mode. set a playback position precisely? On either drive, with the drive in play or play ready mode, press the appropriate JOG key. While monitoring, use the MULTI DIAL to jog a loop backwards and forwards to frame accuracy. The end of the loop marks the point whi