Streszczenie treści zawartej na stronie nr. 1
COMPACT DISC PLAYER
CDJ-1000
Operating Instructions
Streszczenie treści zawartej na stronie nr. 2
NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM. 2 En
Streszczenie treści zawartej na stronie nr. 3
[For U.S. model] IMPORTANT NOTICE H006AEn The serial number for this equipment is located in the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. 3 En
Streszczenie treści zawartej na stronie nr. 4
BEFORE OPERATIONS Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them CAUTIONS REGARDING HANDLING away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may Location sometimes differ from that shown in the explanatory drawings. However the method Install the player in a well-ventilate
Streszczenie treści zawartej na stronie nr. 5
BEFORE OPERATIONS: CAUTIONS REGARDING HANDLING FORCED DISC EJECTION Storing discs If the eject button does not function or the disc cannot be removed, pushing the pin ÷ Discs are made of the same kinds of plastic used for conventional analog au- provided into the forced ejection hole on the front panel will enable the disc to be dio records. Be careful not to allow discs to warp. Always store discs in their removed. cases vertically, avoiding locations with high heat, humidity, or extremely low
Streszczenie treści zawartej na stronie nr. 6
BEFORE OPERATIONS FEATURES The CDJ-1000 compact disc player is designed for use by DJs providing all the func- CUE tions and performance required in disco clubs while offering performance, sound BACK CUE quality and functionality superior to any analog player. After storing the Cue point in memory, press the CUE button while playing the unit to go back to the Cue point and start over. JOG DIAL The large 206 mm diameter Jog dial enables better handling than AUTO CUE an analog turntable. Auto cue
Streszczenie treści zawartej na stronie nr. 7
BEFORE OPERATIONS CONNECTIONS ÷ Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. 1. Connecting to a DJ mixer (DJM-300, DJM-500, DJM-600) (sound output and control terminal connection) Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal. Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue. Connectin
Streszczenie treści zawartej na stronie nr. 8
BEFORE OPERATIONS: CONNECTIONS 3. Connecting to other devices A Connecting to other mixers Connect the AUDIO OUT terminal on the unit with the Line In terminal or AUX terminal on the mixer. (Do not use the Phono terminal. Otherwise the sound will become distorted and prevent normal playback.) B Connecting to a stereo amplifier (when not using a DJ mixer) Connect to the AUX input terminal. Stereo amplifier (Do not use the Phono input terminal.) CDJ-1000 Supplied audio cable C Connecting to a comp
Streszczenie treści zawartej na stronie nr. 9
BEFORE OPERATIONS PANEL FACILITIES Buttons indicated by * cannot be used in digital mode. 11 Digital Mode switch (ON/OFF) P. 8 Top Panel This switch is located on the rear panel of the unit. Set to ON when the digital output is to be used. When set to On, the DJ functions do not function. (Func- tions marked * do not operate in this mode.) And the muted pause mode is used instead of the audible pause mode. 12 CUE/LOOP DELETE button (*) P. 16, 17 Deletes Cue points or Loop points stored in in
Streszczenie treści zawartej na stronie nr. 10
BEFORE OPERATIONS: PANEL FACILITIES 29 Memory Card Loading Slot P.16 35 SEARCH button (1, ¡) P.12 30 Memory Card indicator P.16 36 TRACK SEARCH button (4, ¢) P.12 Lights when the MMC card is being accessed. 37 Reverse indicator (REV) (*) ¶ Do not remove the card or turn off the power when this lamp is on. Lights when the DIRECTION FWD/REV switch is set to reverse. 31 Play/Pause indicator (6) 38 DIRECTION FWD/REV switch (*) Lights during play and flashes during pause. Plays tracks backwa
Streszczenie treści zawartej na stronie nr. 11
BASIC OPERATION DISC LOADING/UNLOADING ¶ Only one disc can be loaded at a time. Never attempt to load more than one disc at the same time, or attempt to load a second disc when one disc has already been loaded. ¶ When loading a disc, do not placing any twisting force on the disc, or try to Label surface up force the disc into the slot. Also, do not attempt to interrupt or defeat the motion of the disc when the player begins to draw a disc into the slot or to eject a disc, since damage to the dis
Streszczenie treści zawartej na stronie nr. 12
BASIC OPERATION: DJ PLAYER OPERATION 3. If auto cueing is off, playback will begin automatically ÷ When you stop turning the Jog dial, the unit returns to playback mode. from the first track. ÷ Release the SEARCH button to exit this mode. ¶ When auto cueing is off, playback will continue after the first track has been played, with all subsequent tracks being played in sequence. LOOP IN/REALTIME CUE VINYL SPEED ¶ When playback of the final track is complete, playback will automatically ADJUST TOU
Streszczenie treści zawartej na stronie nr. 13
BASIC OPERATION: DJ PLAYER OPERATION 5. During playback, rotate the Jog dial while holding the [Amending the Cue point] SEARCH button (1, ¡) depressed. (Super-fast 1. During playback, press the CUE button. search) ¶ This will take you back to the set track position. Hold down the button while turning the Jog dial in the direction you wish to 2. In the VINYL mode, to set the Cue point, go through search to enter fast forward or fast reverse mode. steps 2 and 3 as mentioned above. 6. Rotate the Jo
Streszczenie treści zawartej na stronie nr. 14
ADVANCED OPERATIONS 7 Fader start play CROSS FADER slider is returned to its original position, the status returns to Using the cross fader start function of the DJM-600, DJM-500 or DJM-300, step that in step 9 (player CD2 at its Cue point), so that you can repeat the same 10 above can be eliminated for even simpler mixing. In addition, when the play as many times as you like. Buttons indicated by * cannot be used when the Digital Mode ADVANCED OPERATIONS switch is set to on (and the digital ou
Streszczenie treści zawartej na stronie nr. 15
ADVANCED OPERATIONS 7 Changing the loop out point DISPLAY WAVE SEARCH(ZOOM)2 /CD TEXT DISC 1. Press the LOOP OUT (OUT ADJUST) button in loop play. CD TEXT/WAVE WAVE SEARCH(ZOOM)3 ZOOM ¶ The time of the out point is shown in the display, the LOOP OUT button /CD TEXT TRACK starts to flash rapidly and the LOOP IN/REALTIME CUE button goes off. 2. Press the forward or reverse SEARCH button (1, ¡) or turn the Jog dial. ¶ The loop end point will be shifted forward or backward in 1-frame units. ¶ The
Streszczenie treści zawartej na stronie nr. 16
ADVANCED OPERATIONS USING CUE POINTS/LOOP POINTS MEMORY This unit can store Cue points and Loop points for each disc in internal or on a 7 Deleting stored Cue/Loop points Multimedia Card (MMC). When Cue/Loop points are stored, the calendar display and the playback ad- dress display lights in red. 1. Press the CUE/LOOP CALL button. CUE/LOOP ¶ When the CALL button (3) is pressed, Cue/Loop points are called in order MEMORY from the beginning of the disc and the disc is set to standby at the cue or
Streszczenie treści zawartej na stronie nr. 17
ADVANCED OPERATIONS: USING CUE POINTS/LOOP POINTS MEMORY 7 Storing CUE points Insert a Multimedia Card in the card insertion slot and perform the same pro- CUE/LOOP cedure as when the internal memory is used. P.16 MEMORY 7 Storing Loop points CUE/LOOP Insert a Multimedia Card in the card insertion slot and perform the same pro- DELETE cedure as when the internal memory is used. P.16 7 Calling stored Cue/Loop points CUE/LOOP Insert a Multimedia Card in the card insertion slot and perform the
Streszczenie treści zawartej na stronie nr. 18
OTHERS TROUBLESHOOTING Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the problem still persists, contact your nearest Pioneer authorized service center or dealer for service. Symptom Cause Remedy Disc doesn’t eject even when EJECT button (0) is ÷ Power
Streszczenie treści zawartej na stronie nr. 19
OTHERS: TROUBLESHOOTING Error message display When the CDJ-1000 CD player is unable to operate properly, an error code is dis- played on the display panel. Check the error code displayed against the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contact t
Streszczenie treści zawartej na stronie nr. 20
OTHERS SPECIFICATIONS 1. General 3. Accessories ÷ Operating instructions ........................................................................................ 1 System ................................................................. Compact disc digital audio system ÷ Power cord ........................................................................................................... 1 Power requirements ........................................................................... AC 120 V, 6
