Streszczenie treści zawartej na stronie nr. 1
CD-RECEIVER
KDC-W4737U
KDC-W4737UY
KDC-W4537U
KDC-W4537UY
INSTRUCTION MANUAL
© B64-3546-00/00 (EW/E2W)
Streszczenie treści zawartej na stronie nr. 2
Contents Safety precautions 3 Menu system 23 Menu System Notes 4 Security Code Touch Sensor Tone General features 7 Manual Clock Adjustment Power Synchronize Clock Selecting the Source DSI (Disabled System Indicator) Volume Selectable Illumination Attenuator Display Illumination Control Audio Control Dimmer Audio Setup Switching preout Speaker Setting Supreme Setting Subwoofer Output News Bulletin with Timeout Setting Switching Display Local Seek Theft Deterrent Faceplate Tuning Mode TEL Mute AF
Streszczenie treści zawartej na stronie nr. 3
Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot 2WARNING If you try to load a 8 cm (3 in.) CD with its adapter into To prevent injury or fire, take the following the unit, the adapter might separate from the CD and precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside About CD players/disc changers connected the unit. to this unit • Do not watch or fix your eyes on the unit’s display Kenwood
Streszczenie treści zawartej na stronie nr. 4
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • The charac
Streszczenie treści zawartej na stronie nr. 5
About Audio file About USB device • Playable Audio file • Install the USB device in the place where it will not prevent you from driving your vehicle properly. AA C-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) • You cannot connect a USB device via a USB hub. • Playable disc media • Take backups of the audio files used with this unit. The files can be erased depending on the operating CD-R/RW/ROM conditions of the USB device. • Playable disc file format We shall have no compensation for
Streszczenie treści zawartej na stronie nr. 6
Notes This Product is not installed by the manufacturer of a Handling CDs vehicle on the production line, nor by the professional • Do not touch the recording surface of the CD. importer of a vehicle into an EU Member State. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. Information on Disposal of Old Electrical • Clean from the center of the disc and move and Electronic Equipment (applicable for outward. EU countries that have ad
Streszczenie treści zawartej na stronie nr. 7
General features Release button VOL/Control knob LOUD indicator Clock display ATT indicator Power Selecting the Source Press the [SRC] button. Turning ON the Power Press the [SRC] button. Source required Display Tuner "TUNER" ⁄ USB device (iPod*) "USB" ("iPod") • When the power is ON, the (page 24) is displayed as "CODE ON" or "CODE OFF". CD "CD" External disc (Optional accessory) "CD CH" Turning OFF the Power Auxiliary input* "AUX" Press the [SRC] button for at least 1 secon
Streszczenie treści zawartej na stronie nr. 8
General features Volume Audio Control Increasing Volume 1 Select the source to adjust Turn the [VOL] knob clockwise. Press the [SRC] button. Decreasing Volume 2 Enter Audio Control mode Turn the [VOL] knob counterclockwise. Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in Attenuator the table below. Turning the volume down quickly. 4 Adjust the Basic Audio item Turn th
Streszczenie treści zawartej na stronie nr. 9
Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the Speaker type Each
Streszczenie treści zawartej na stronie nr. 10
General features • If the selected display item does not have any Switching Display information, alternative information is displayed. Changing the information displayed. • * When playing music from iPod, the folder name display may show something different such as playlist or artist 1 Enter Switching Display mode name depending on the music selection procedure. Press the [DISP] button for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob towards ri
Streszczenie treści zawartej na stronie nr. 11
TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Ref
Streszczenie treści zawartej na stronie nr. 12
Tuner features Control knob ST indicator Band display Frequency display Preset station number Function of remote control Tuning Direct Access Tuning Selecting the station. Entering the frequency and tuning. 1 Select tuner source Press the [SRC] button. 1 Select the band Select the "TUNER" display. Press the [FM] or [AM] button. 2 Select the band 2 Enter Direct Access Tuning mode Push the Control knob towards [FM] or [AM]. Press the [DIRECT] button on the remote Each time you push the knob
Streszczenie treści zawartej na stronie nr. 13
Preset Tuning ⁄ • You can enter the FM band frequency in steps of a Recalling the stations in the memory. minimum of 0.1 MHz. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Recall the station Press the desired [1] — [6] button. Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 3 Put the frequency in the memory Press the desired
Streszczenie treści zawartej na stronie nr. 14
RDS features Control knob PTY indicator TI indicator Traffic Information ⁄ • Traffic information can be switched when it is on the Changing to traffic information automatically when Tuner Source. However, you cannot switch the Traffic a traffic bulletin starts even when you are not information during reception of the Traffic bulletin listening to the radio. switched from the source other than the Tuner. Press the [TI] button. Each time you press the button, the Traffic information funct
Streszczenie treści zawartej na stronie nr. 15
PTY (Program Type) ⁄ • Speech and Music include the Program type shown Selecting the Program Type and searching for a below. station. Music: No.12 — 17, 26 — 30 Speech: No.3 — 11, 18 — 25, 31 1 Enter PTY mode • You can put the Program Type in the [1] — [6] button Press the [PTY] button. memory and for quick recall. Refer to the (page 15). ⁄ • You can change the display language. Refer to (p
Streszczenie treści zawartej na stronie nr. 16
RDS features Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 15). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards up or down. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "ENGLISH" French "FRENCH" Swedish "SWEDISH" German "GERMAN" 4 Exit Changing Language mode Press the [TI
Streszczenie treści zawartej na stronie nr. 17
CD/USB device/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Playing CD & Audio file When a disc is inserted Press the [SRC] button. Select the "CD" display. ⁄ • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the [38] button. Each time you press the button, the audio pauses or plays. Eject the CD Press the [0] button. ⁄ • For the audio files and discs you can play with this unit, refer to
Streszczenie treści zawartej na stronie nr. 18
CD/USB device/Audio file/External disc control features Playing USB (iPod*) device Drive Search Selecting the device inserted in the Multi Card When the USB device is not connected Reader. Connect the USB device 1 Put the playback to pause Playback of the file contained in the USB device Press the [S.MODE] button. starts. 2 Select a device When the USB device is connected Push the Control knob towards up or down. Select USB source 3 Restart playback Press the [SRC] button. Press the [S.MODE]
Streszczenie treści zawartej na stronie nr. 19
Function of remote control Fast Forwarding and Reversing Direct Music Search Fast Forwarding Doing Music Search by entering the music number. Hold down toward [¢] with the Control knob. Release to resume the playback. 1 Enter the music number Press the number buttons on the remote Reversing control. Hold down toward [4] with the Control knob. Release to resume the playback. ⁄ • You can select Direct music Search up to 999. ⁄ • The accurate play time is not displayed during fast 2 Do music Se
Streszczenie treści zawartej na stronie nr. 20
CD/USB device/Audio file/External disc control features Track/File/Disc/Folder Repeat Random Play Replaying the music, disc in the Disc changer or Play all the music on the disc or Audio file folder in Audio file folder you are listening to. random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play turns alternates between the modes shown in the tables ON or OFF. below. When the Random mode is ON, "
