Instrukcja obsługi Kenwood KDC-MP6039

Streszczenie treści zawartej na stronie nr. 1

CD-RECEIVER
KDC-MP6539U
KDC-MP6039
INSTRUCTION MANUAL
© B64-4044-00/00 (MW)

Streszczenie treści zawartej na stronie nr. 2

Contents Before use 3 Basic Operations of remote control 19 Basic Operation 4 Appendix 20 General functions Accessories/ Installation Procedure 22 Tuner functions Disc & Audio file play functions Connecting Wires to Terminals 23 Function Control 6 Installation/Removing the Unit 24 ⁄ • Read through this page first for the setting of each function. Troubleshooting Guide 25 Display Settings 8 Specifications 27 About Display Type Text Display Selection Key Color Selection Station/Disc Naming (SNPS

Streszczenie treści zawartej na stronie nr. 3

Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to ISO 8859-1 can be the unit. displayed. • Characters that confor

Streszczenie treści zawartej na stronie nr. 4

Basic Operation [SRC] [ATT] [AUTO] [ ] [FNC] Release Disc slot AUX Auxiliary input Control knob [AUD] (Rear side) USB Terminal Muting volume upon reception of phone call General functions When there is a call, “CALL” is displayed and the audio system is paused. Power/Source Select button [SRC] When the call ends, “CALL” disappears and the audio Turns on the power. system comes back on. When the power is ON, select a source. The audio system comes back on when [SRC] is SRC Select mode 1: Pr

Streszczenie treści zawartej na stronie nr. 5

, : Indicates the button etc. to operate. Disc & Audio file play functions ⁄ • Use the mini-plug cable which is stereo type and does not have any resistance. Disc play Disc slot • The auxiliary input requires the setting made in “MENU” > Starts playing when a disc is inserted. “Built in AUX” of (page 6). When a CD is inserted, the “IN” indicator is ON. ⁄ Subwoofer output Control knob • 3 inch (8 cm) CD cannot be used. Attempt to insert using Switches between ON (“SUBW

Streszczenie treści zawartej na stronie nr. 6

Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets security code MENU “Security Set” 1 sec. 13 “SRC Select” “1”*/ “2” Sets the source selection method. 21 1 When set to “ON”, allows you to select music in the manner “iPod Mode”* “OFF”/ “ON”* 11 similar to that of the iPod. 1 “AT COL CHG”* “OFF”/ “iPod”* When the iPod source is used, sets whether the illumination 21 color is changed by the iPo

Streszczenie treści zawartej na stronie nr. 7

Category Item Setting Entry Setting overview Condition Page When set to “ON”, plays the music in the disc changer M.RDM “ON”/ — randomly. T.REP “ON”/ — When set to “ON”, plays the music repeatedly. When set to “ON”, plays the music on the disc repeatedly. D.REP “ON”/ — *Factory setting 1 Enter Function Control mode * Function of KDC-MP6539U. Press the [FNC] button. * Function of KDC-MP6039. Function icon is displayed. Displayed item is depending on currently selected source or mode. The mar

Streszczenie treści zawartej na stronie nr. 8

Display Settings About Display Type Text Display Selection Shown below are examples of display types. Changing the text display. Display Display Type Chinese display In Tuner source “TYPE [A]” 3 1 3 1 Information Display 1 1 Station name “SNPS” 1 Frequency “Frequency” “TYPE [B]” 1 1 Spectrum Analyzer & Clock “Speana/Clock” 1 Clock “Clock” 1 1 Date “Date” “TYPE [C]” 2 2 Blank “Blank” 3 1 3 1 1 In CD & External disc source “TYPE [D]” Information Display 2 2 1 1 Disc title “Disc Title” 1 Track titl

Streszczenie treści zawartej na stronie nr. 9

Function of KDC-MP6539U 1 Enter Text Display Selection mode (In Display Type A/ B/ C/ D/ F) Key Color Selection Select “DISP” > “TEXT” . Selecting the Key (Button) color. For how to select Function Control item, refer to (page 6). 1 Enter Key Color Selection mode Select “K-COL” . 2 Select the text display part (Display Type A/ B/ For how to select Function Control item, refer to C/ D only) (page 6). Push the Control knob towards up or down. The selecte

Streszczenie treści zawartej na stronie nr. 10

Display Settings Station/Disc Naming (SNPS/DNPS) Auxiliary Input Display Setting Attaching a title to a Station or CD. Selects the display below when changing to Auxiliary input source. 1 Receive/play the station/disc you want to attach a title to 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) 2 Select Name set mode item during Menu Select the “Name Set” display. mode For how to select Function Control items, refer to Select the “Name Set” display.

Streszczenie treści zawartej na stronie nr. 11

Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca

Streszczenie treści zawartej na stronie nr. 12

Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre

Streszczenie treści zawartej na stronie nr. 13

Other Functions Entering Security Code Security Code The Security Code is required to use the audio unit When Security Code is set, possibility of theft when the unit is first used after removed from the is reduced because input of Security Code is battery power source or the Reset button is pressed. prompted to turn on the unit once it is turned off. 1 Turn the power ON. ⁄ 2 Do the step 3 through 4 operation, and reenter • When you activate the Security Code function, it cannot be the sec

Streszczenie treści zawartej na stronie nr. 14

Other Functions Manual Clock Adjustment Demonstration mode setting Turning the demonstration mode ON/OFF. 1 Select Clock Adjustment item during Menu mode (In Standby mode) 1 Select Demonstration item during Menu mode Select the “Clock Adjust” display. Select the “DEMO Mode” display. For how to select Function Control items, refer to For how to select Function Control items, refer to (page 6). (page 6). 2 Enter Clock adjustment mode 2 Set the Demonstratio

Streszczenie treści zawartej na stronie nr. 15

Audio Adjustments Audio Control Audio Setup You can adjust following Audio Control items ; You can set Sound system , such as follows; Adjustment Item Display Range Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Front High Pass Filter “HPF-F” Through/80/100/120/ 150/180 Hz Subwoofer level “SUB-W LEVEL” –15 — +15 Rear High Pass Filter “HPF-R” Through/80/100/120/ System Q “NATURAL”/ Natural/User setting/Rock/ 150/180 Hz “USER”/“ROCK”/ Pops/Easy/Top 40/Jazz “POPS”/“EASY”/ (The ind

Streszczenie treści zawartej na stronie nr. 16

Audio Adjustments Speaker Setting Audio Preset Memory Fine-tuning so that the System Q value is optimal Registering the value setup by Sound Control. The when setting the speaker type as follows; memory cannot be erased by the Reset button. Speaker type Display 1 Setup Sound Control OFF “OFF” Refer to the following operations to setup the For 5 & 4 in. speaker “5/4inch” Sound Control. For 6 & 6x9 in. speaker “6x9/6inch” -

Streszczenie treści zawartej na stronie nr. 17

Audio Preset Recall Recalling the sound setup registered by

Streszczenie treści zawartej na stronie nr. 18

TV control (Optional) Basic Operation Preset Tuning Recalling the TV channels in the memory. Selecting TV source Press the [SRC] button. 1 Enter Preset Tuning Select mode Select the “TV” display. Turn the Control knob. For how to select source item, refer to of (page 2 Select a desired station in the memory 4). Turn the Control knob. Select the TV band and Video input 3 Recall the station Push the Control knob toward up. Pres

Streszczenie treści zawartej na stronie nr. 19

Basic Operations of remote control In Tuner source SRC VOL SRC ATT Band select [FM]/[AM] ATT VOL AUD AUD Station select [4]/[¢] FM/AM Recall preset stations [1] — [6] DIRECT 2-ZONE (page 12, 18) In CD/USB source 0 — 9 Music select [4]/[¢] Folder/Disc select [FM]/[AM] Pause/Play [38] In TV source General control Band/Video input select [FM] Volume control [VOL] Channel select [4]/[¢] Source select [SRC] Recall preset channels [1] — [6] Volume reduce [ATT] ⁄ In Audio contr

Streszczenie treści zawartej na stronie nr. 20

Appendix About Audio file About USB device • Playable Audio file • If you start playback after connecting the iPod, the AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) music that has been played by the iPod is played first. • Playable disc media In this case, “RESUMING” is displayed without CD-R/RW/ROM displaying a folder name, etc. Changing the browse • Playable disc file format item will display a correct title, etc. ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • When the iPod is connect