Instrukcja obsługi Dacor IF36 Series

Streszczenie treści zawartej na stronie nr. 1

3 Door Panel Overlay Installation Guide
Top Panels: Width Height (in inches)
IF36 Series
3-Door Refrigerators
1/4” or 3/8” backer * 17 13/16* 42 1/16
* Recessed backer option: The backer material is exposed along the handle side of both upper doors.
The 17 13/16” width dimension provides both 1/4” and 3/8” backers with a 3/16” recesses from the backer
edge to the panel edge along the handle side. See page 2. The exposed edge of the backer material can
be covered with wood ven

Streszczenie treści zawartej na stronie nr. 2

IF-36 Refrigerator 3-Door Panel Overlay Installation Guide 3/8” Backer Edge Details: RI GHT PANEL BACKER LE FT PANEL BACKER 0 5/16" 0 5/16" Metal of Door Metal of Door (1/4” minimum) (1/4” minimum) Handle Edge (requires Hinge Edge Hinge Edge Handle Edge (requires LEFT TOP RIGHT TOP Hinge Edge 0 5/16" BOTT OM PANEL BACKER 0 5/16" Note: Lower backer panel has 5/16” x 1/8” rabbit cut into all four sides Page 2 0 1/4" 0 1/8" 0 1/4" 0 1/8" 0 3/8" 0 3/8" 0 1/8" 0 1/4" 0 1/8" 0 1/4"

Streszczenie treści zawartej na stronie nr. 3

IF-36 Refrigerator 3-Door Panel Overlay Installation Guide 3/8” and 1/4” Backers Cross Section of Overlay and Inlay Panels: Left Panel Shown 0 5/32" 0 5/16" Frameless Overlay Metal of Door 0 3/16" Framed Inlay Metal of Door 0 7/32" 0 3/16" Page 3 0 1/4" 0 1/8" 0 1/4" 0 3/8"

Streszczenie treści zawartej na stronie nr. 4

IF-36 Refrigerator 3-Door Panel Overlay Installation Guide Top View Sectional Panel With No Backer Left Panel Only 0 3/16" Metal of Door No Backer Overlay Instructions: Mill all molding material to full dimension. 0 1/8" CUT ONLY the frame edges to produce 1/4” x 3/16” tongue on the frame edges. 0 5/16" Overlay Dimension No Backer Inlay Instructions: Mill all molding material to include a 1/4” x 3/16” Metal of Door tongue on the frame edge. Use appropriate inlay dimensions to construct panels