Streszczenie treści zawartej na stronie nr. 1
MULTIPLE COMPACT DISC PLAYER
DPF-J5020
INSTRUCTION MANUAL
KENWOOD CORPORATION
This unit is designed for home use only. If the unit is
used in a location other than at home, such as in a
shop (for commercial use), in a car or in a ship, etc.,
and is damaged, a service fee may be charged even
during the warranty period.
COMPACT
DIGITAL AUDIO
TEXT
B60-4081-08 00 (K, P, Y, T) AP 9808
Streszczenie treści zawartej na stronie nr. 2
Before applying power Caution : Read this page carefully to ensure safe operation. Before applying power DPF-J5020 (En) Units are designed for operation as follows. 2 U.S.A. and Canada ................................................................... AC 120 V only Europe and U.K. ........................................................................ AC 230 V only Australia .................................................................................... AC 240 V only China and Russia ....
Streszczenie treści zawartej na stronie nr. 3
Before applying power DPF-J5020 (En) Special features 3 CD player with 200-disc changer This unit can accommodate up to 200 discs and can be used like a home jukebox. CD-TEXT support The text information (disc title, track titles, names of the artists, songwriters, composers, etc.) recorded on the CDs can be easily called and displayed. (Some Japanese words and text may not be displayed.) % Title registerable In case of a disc not corresponding to CD-TEXT, you can register a disc title or other
Streszczenie treści zawartej na stronie nr. 4
Before applying power DPF-J5020 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. 4 Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recomme
Streszczenie treści zawartej na stronie nr. 5
Before applying power Important items DPF-J5020 (En) 5 Discs which can be played with this unit Disc handling precautions CD (12 cm), and the audio part of CDV, CD-G, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying COMPACT COMPACT Handling the marking on the label surface. Hold the discs so that you do not touch the DIGITAL AUDIO DIGITAL AUDIO playing surface. ÖAn 8 cm CD cannot be played back. Label side Playing side Never play a cracked or warped di
Streszczenie treści zawartej na stronie nr. 6
System connections System connections DPF-J5020 (En) Make connections as shown below. Malfunction of microcomputer When connecting the related system components, refer 6 If operation is not possible or erroneous display also to the instruction manuals of the related components. appears even though all connections have been Do not plug in the power lead until all connections are com- made properly, reset the microcomputer refer- pleted. ring to “In case of difficulty”. Ú Be sure to use this unit
Streszczenie treści zawartej na stronie nr. 7
System connections DPF-J5020 (En) Connection to digital amplifier or MD 7 Connect the DIGITAL OUT (OPTICAL or COAXIAL) jack to the digi- tal input jack of the amplifier, DAT recorder, MD recorder, etc., using Optical fiber cable an optical fiber cable or coaxial cable which are commercially avail- able in audio stores. ÖWhen using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard. Ö Be careful not to bend, coil,
Streszczenie treści zawartej na stronie nr. 8
Controls and indicators DPF-J5020 (En) 8 (The displays given in this manual are approximations only. They may differ Play indicator Text information display from what actually appears on the display.) ¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
Pause indicator DISPLAY 1 1 2 3 4 5 67 8 9 0 ! MULTIPLE COMPACT DISC PLAYER 0
PUSH OPEN TIMER PLAY OFF ON 6 DISC SKIP STANDBY STANDBY DISPLAY CONFIRM 7 POWER RANDOM REPEAT 4 ¢
ON/STANDBY 200 DISC LOADING WITH TWIN PICK UP MECHANISM @ 1POWER key/STANDBY indicator
Streszczenie treści zawartej na stronie nr. 9
Operation of remote control unit DPF-J5020 (En) The keys with the same name as those on the main unit operate the same way as on the main unit. The keys marked * are provided only on the remote control unit. 9 1Input keys for numbers and letters * 6Keys related to program and file Used for selection of disc numbers and registration track numbers, as well as for title registra- * MODE key tion. Press to switch the mode. 1 * SET key CONFIRM POWER 2 Keys related to playback mode and AB C 5 Used for
Streszczenie treści zawartej na stronie nr. 10
Preparation Preparation DPF-J5020 (En) Up to 200 CDs can be loaded in the carousel. Disc exchange also is possible during playback. 10 Never let your hand or any object enter inside the unit. Loading discs in the carousel Switch power ON. 1 Main unit Press the POWER ( ) key. STANDBY POWER Open the door panel toward the front. 2 Press PUSH OPEN at the right top Ö Do not place any object on the open door panel. of the door panel. Load discs. 3 1Turn the DISC SKIP knob and bring the slot with the d
Streszczenie treści zawartej na stronie nr. 11
Preparation DPF-J5020 (En) 11 Disc replacement Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the door panel is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the door panel. When the disc information has been read in at the time of regis- tration of d
Streszczenie treści zawartej na stronie nr. 12
Normal play (TRACK mode) (TRACK mode) Normal play DPF-J5020 (En) 12 Preparation Ö Load discs in the carousel. 0 Playing tracks in order from track No.1 Use the following procedure to play a CD in the original order of tracks from track No.1. Select the disc. 1 ÖEach press of a key increases (or decreases)the disc number. Holding DISC SKIP the key depressed varies the disc numbers successively. DOWN UP ÖWhen the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc ti
Streszczenie treści zawartej na stronie nr. 13
Normal play (TRACK mode) DPF-J5020 (En) Direct disc selection 13 1 Press the DISC SELECTOR key. Press the numeric keys in the following order... Disc No. 63 : 63 DISC SELECTOR Disc No. 100 : 1)) X Within 8 seconds! 2 Input the disc number. How to input numeric values 124 3 As this unit requires input of large numeric values, it adopts a HI J K different input method from other KENWOOD products. How- ever, the method used with other KENWOOD products can also 568 7 be used to input numeric values
Streszczenie treści zawartej na stronie nr. 14
Normal play (TRACK mode) DPF-J5020 (En) 14 Preparation Ö Load discs in the carousel. 0 Playback from desired track Select the disc. 1 1Select the disc number. DISC SKIP Display when disc No. 123 is selected DOWN UP Previous disc Next disc D3 12 13 :2 ÖThe disc number can be selected directly by using the DISC SELECTOR Within 8 seconds! and numeric keys in place of the DISC SKIP keys. ÖWhen the disc corresponds to CD-TEXT, or when the disc title has been 2Set the input. registered, the disc title
Streszczenie treści zawartej na stronie nr. 15
Displays DPF-J5020 (En) Displays scrolling Some track titles contain so much text information that the full 15 titles will not fit on the display. In cases like this, the letters on the display move from right to left so that the non-visible part of the title is revealed. This type of display movement is known as “scrolling of display.” Display example |Scroll display D3 12GOODL TO DF 3AI SHON... D3 12FAISHNOD E H T rack title display (only CD-TEXT) 1 Time display SL AIA Y WAYW SSEET Each pres
Streszczenie treści zawartej na stronie nr. 16
Programming tracks in desired order (PGM mode) (PGM mode) Programming tracks in desired order DPF-J5020 (En) Use the following procedure to select desired tracks (up to 32 tracks) from different discs and program them in the 16 desired order. Preparation Ö Load discs in the carousel. 0 Ö Set the CD player to stop mode. Press so that the “PGM” indicator lights. 1 CHARA. /P.MODE PGME 3SELTCD 1 IC S Select the disc. 2 1Select the disc number. DISC SKIP DOWN UP P0 GM12 ED0 01S DIC Previous disc Nex
Streszczenie treści zawartej na stronie nr. 17
Programming tracks in desired order (PGM mode) DPF-J5020 (En) 17 To check the programmed tracks SPACE /CHECK P0 GM1D ED 2000 DT3 ÖEach time the key is pressed, the program No. and the disc No. are displayed. ÖThe previous display resumes in a few seconds. To add a track to the program 1Set the CD player to stop mode. Ö When a track No. is entered, the track will be added to the end of the existing program. 2 Perform steps 2 and 3 of “Programming tracks in desired order”. ^ To change a track in t
Streszczenie treści zawartej na stronie nr. 18
Programming tracks in desired order (PGM mode) (REPEAT mode) Repeated playback DPF-J5020 (En) 18 Preparation Ö Load discs in the carousel. 0 To repeat only the desired tracks 1 Program the desired tracks by performing steps 1 ÖUp to 32 tracks can be programmed by repeating steps 1. to 3 of “Programming tracks in desired order”. ^ 2Switch REPEAT ON. PGRE EPTAO2D N T3 0 REPEAT E Ö The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the r
Streszczenie treści zawartej na stronie nr. 19
Programming tracks in desired order (PGM mode) (RANDOM mode) Playback in a random order DPF-J5020 (En) Use the following procedure to activate random playback which selects a track at random after every track. This fea- 19 ture may allow you to play CDs for long hours without getting tired of. Preparation Ö Load discs in the carousel. 0 Check that the unit is in the normal play TRACK 1 mode. # Select discs. 2 To select one disc 1Select the disc number. DISC SKIP Ö The disc number can be selecte
Streszczenie treści zawartej na stronie nr. 20
Registration of Title Registration of Title DPF-J5020 (En) For discs not corresponding to CD-TEXT, a title can be given to the disc (max. 25 characters). Operation is possible also 20 when the door panel is open. We recommend to register titles while discs are being inserted. Preparation Ö Load discs in the carousel. 0 Ö Set the CD player to stop mode. ÖCheck that the unit is in the normal play TRACK mode. # (TITLE INPUT mode) Assigning Title Switch to title input mode. 1 1Press the MODE key. M