Streszczenie treści zawartej na stronie nr. 1
8 GALL 8 GALLON 2 HP ON 2 HP
8 GALL 8 GALL 8 GALLON 2 HP ON 2 HP ON 2 HP
AIR COMPRESSOR
Model 95386
OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without
Streszczenie treści zawartej na stronie nr. 2
PRODUCT SPECIFICATIONS In tem Descriptio 2 HP Motor, 120 V / 60 Hz / 3360 RPM Electrical Requirements 15.5 Amps startup, 7.4 Amps running ® 5'-4-1/2" long Power Cord - 14AWGX3C CUS MI aximum Working PSI 115 PS Pp ump Style Single Cylinder Pum 6.0 CFM @ 40 PSI, 5.0 CFM @ 90 PSI , 4.2 CFM Air Delivery @115 PSI As ir Tank Capacity 8 Gallon Automatic Shut-Off @ 115 PSI Automatic Pressure Controls Automatic Restart @ 80 PSI As ir Outlet Size 1/4"-18 NPT Female Thread Ns et Weight 55 Pound SAVE THIS M
Streszczenie treści zawartej na stronie nr. 3
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. Never allow children in the work area. ELECTRICAL SAFETY 4. Grounded tools must be pl
Streszczenie treści zawartej na stronie nr. 4
10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 11. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 12. Remove adjusting keys or wrenches before turning the power tool on. A
Streszczenie treści zawartej na stronie nr. 5
20. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 21. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 22. Tool service must be performed only by qualified repair pe
Streszczenie treści zawartej na stronie nr. 6
3. Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A NOTE: This product has a 3-prong, grounded electrical plug DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 4. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies w
Streszczenie treści zawartej na stronie nr. 7
EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Figure C, next page.) 3. The smaller the gauge number of the wire, the greater the capacity of the cord. For exa
Streszczenie treści zawartej na stronie nr. 8
SYMBOLOGY SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use this product in areas near flammable chemicals, gasoline, dusts and vapors. 2. Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 3.
Streszczenie treści zawartej na stronie nr. 9
8. When filling the Air Compressor with oil, make sure to unscrew (do not pull) the Oil Plug (31) out. 9. Do not allow moisture to build up inside the Air Tank (1). Drain water from the tank daily. Do not open the Drain Valve (65) so that more than four threads are showing. 10. Avoid injury. Never direct the pressurized air stream at people or animals. 11. Do not alter or remove the factory sealed Safety Valve (56). 12. Dress properly. Do not wear loose clothing or jewelry as they can be caug
Streszczenie treści zawartej na stronie nr. 10
23. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 24. WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & S
Streszczenie treści zawartej na stronie nr. 11
add new oil through the oil fill holes. Make sure not to overfill. Screw on the Oil Plug (31), being careful not to strip the threads. OIL SIGHT GAUGE OIL PLUG (33) (31) KEEP OIL LEVEL EVEN WITH RED CIRCLE FIGURE E FIGURE D 2. Turn the Air Outlet Valve (63) to its CLOSED position. Then connect a high pressure air hose (not included) equipped with a quick connector (not included) to the Air Outlet Valve. If using a water filter and oiler in series with the Air Outlet Valve of the Air Compress
Streszczenie treści zawartej na stronie nr. 12
3. Make sure the Drain Valve (65) is closed. (See Figure G.) DRAIN VALVE (65) Figure G ON/OFF PRESSURE SWITCH (55) TANK AIR OUTLET PRESSURE VALVE (63) OUTLET GAUGE (54) PRESSURE GAUGE (60) FIGURE H 4. Make sure the “On/Off” Pressure Switch (55) is DOWN in its OFF position. Then, plug the Power Cord (64) into the nearest 120 volt, grounded, electrical outlet. (See Figure H.) 5. Pull UP on “On/Off” Pressure Switch (55) to start the Compressor. (See Figure H.) 6. Allow the Compressor to build up
Streszczenie treści zawartej na stronie nr. 13
PSI of the tool on the Output Pressure Gauge (60), push in the knob to set the output pressure. (See Figure H.) 7. As long as the “On/Off” Pressure Switch (55) is in its ON position the operation of the Compressor is automatic, controlled by an internal pressure switch. The Compressor will turn on automatically when the air pressure drops to 80 PSI as indicated on the Pressure Gauge (54), and will turn off automatically when the air pressure reaches 115 PSI as indicated. IMPORTANT: The intern
Streszczenie treści zawartej na stronie nr. 14
INSPECTION AND MAINTENANCE 1. WARNING! Always unplug the Air Compressor from its electrical outlet before performing any inspection, maintenance, or cleaning. 2. Before each use: Inspect the general condition of the Air Compressor. Check for misalignment or binding of moving parts, cracked or broken parts, damaged wiring, damaged air hose, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not
Streszczenie treści zawartej na stronie nr. 15
PARTS LIST Part # Description Part # Description 1 Air tank 35 Handle 2 M8 nut 36 Cylinder gasket 3 Spring washer 8 37 Connecting rod 4 Flat washer 38 Piston 5 Wheel assembly 39 Oil clean ring 6 Wheel shaft screw 40 Seal ring 7 O-sealed washer 41 Cylinder 8 Tank cap 42 Valve plate gasket 9 Sealed washer 43 Right-angle connector 10 Exhaust pipe assembly 44 Screw M8x105 11 Spring washer 45 Air filter 12 Protection Cover 46 Cylinder cover 13 Fan 47 Cylinder gasket 14 Black motor cove
Streszczenie treści zawartej na stronie nr. 16
ASSEMBLY DIAGRAM Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIF
