Instrukcja obsługi Bestop 39331

Streszczenie treści zawartej na stronie nr. 1

TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
®
For: Jeep Wranglers 1997 and Newer Part Number: 39331 Vinyl
®
Jeep is a registered trademark of Chrysler and
39341 Cloth
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat pro

Streszczenie treści zawartej na stronie nr. 2

Parts List and Hardware Identification 8mm Flat Washer, Qty - 4 Seat, Qty - 1 Tools Needed Adjustable Wrench or 1/2" Wrench 13mm Wrench Cotter Pin, Qty - 2 M8-1.25 x 35mm Bolt, Qty - 4 Floor Mounting Floor Mounting Bracket, Lt., Qty - 1 Bracket, Rt.,Qty - 1 5/16-18 x 1 1/4" Bolt, Qty - 4 TrailMax™ Fold and Tumble Lock Down Lock Down Rear Seat Installation Instructions Bracket, Lt., Bracket, Rt., ® For: Jeep Wranglers 1997 and Newer Part Number: 39331 Vinyl Jeep® is a registered trademark of C

Streszczenie treści zawartej na stronie nr. 3

Seat Installation If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting WARNING Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others. Step One Floor Mounting Bracket Installation Floor Mounting Brackets Cutout toward Locate the Floor Mounting Bracket mounting holes on the floor of front the vehicle behind the front seat ri

Streszczenie treści zawartej na stronie nr. 4

Failure to install the Cotter Pin may result in the seat moving off the Front Brackets which could result in serious injury to you and others. WARNING Seat Legs Seat Step Three Seat Installation Slide Lower Rear Pin on Seat into top hole in Orient the Seat, with the Legs on the bottom of the seat facing Floor Mounting Brackets the rear of the vehicle. Fold the Seat back down into the closed position. Place Seat in the vehicle. Front Locate the two (2) pins in each front corner of the seat Seat c

Streszczenie treści zawartej na stronie nr. 5

Care of your Bestop Seat Your seat is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning. Washing: The seat fabric should be washed often using a mild detergent, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap. LIMITED WARRANTY We warrant our product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper ma