Instrukcja obsługi D-Link DES-1005D

Streszczenie treści zawartej na stronie nr. 1

DES-1005D

10/100M Fast Ethernet Switch

Before You Begin
This Quick Installation Guide gives step-by-step instructions for setting up the D-Link
DES-1005D 10/100M Fast Ethernet Switch. The model you have purchased may
appear slightly different from those shown in the illustrations. For more detailed
information about the switch, its components, making network connections and
technical specifications, please refer to the User’s Guide included you’re your switch.

Check Yo

Streszczenie treści zawartej na stronie nr. 2

Unpacking Please make sure the following items are present and undamaged. 1.The switch 2.AC Power Adapter 3.Rubber Feet 4.Screws and Anchors Physical Installation Putting the Rubber Feet For desktop installation, please take time now to attach the included rubber feet to the base of the switch. 2

Streszczenie treści zawartej na stronie nr. 3

Mounting Switch on Wall The DES-1005D can be mounted on a wall. Two mounting slots are provided on the bottom side of the hub for this purpose. Make sure that the front panel is exposed to allow you to view the LEDs while the unit is on. PC to DES-1005D A PC can be connected to the Switch via a two-pair Category 3,4, or5 UTP/STP straight-through cable. For 100Mbps operation Category 5 must be used. The PC (equipped with a RJ-45 10Mb Ethernet or 100M

Streszczenie treści zawartej na stronie nr. 4

The LED indicators for PC connection depend on the LAN card’s capabilities. If LED indicators are not lit after making a proper connection, check the PC LAN card, the cable and the DES-1005D conditions and connections. 1. The “100LINK/ACT,10LINK/ACT” LED indicator lights green for hookup to 100Mbps speed or light amber for hookup to 10Mbps speed. Hub to DES-1005D A hub (10 or 100BASE-TX) can be connected to the DES-1005D via a two-pair Category 3, 4, 5 UTP/STP straight cables. Fo