Streszczenie treści zawartej na stronie nr. 1
Owner’s manual
Mode d’emploi
Manual de instrucciones
DXZ615
AM/FM CD PLAYER
WITH CD/MD CHANGER CONTROL
•
LECTEUR CD AM/FM AVEC
COMMANDE DE CHANGEUR CD/MD
•
RADIO DE AM/FM Y REPRODUCTOR DE DISCOS
COMPACTOS CON CONTROL DE CAMBIADOR
DE DISCOS COMPACTOS/MINIDISCOS
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd. PE-2397B
2001/1 (D·C) Printed in China / Imprimé en Chine / Inpreso en China 280-7627-00
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing this Clarion product. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer, AUX, DAB, DSP DVD, PHONE MUTE and TV tuner connected via the CeNET cable. The CD changer, MD changer and TV tuner ha
Streszczenie treści zawartej na stronie nr. 3
Handling Compact Discs 6. REMOTE CONTROL 2. PRECAUTIONS Use only compact discs bearing the mark. Receiver for remote control unit 1. When the inside of the car is very cold and 3. When the auto antenna cord is connected to Do not play heart-shaped, octagonal, or other specially shaped compact discs. the player is used soon after switching on the car auto antenna cord, when the unit is the heater moisture may form on the disc or switched to the radio mode (or the TV mode), • To remove a compact
Streszczenie treści zawartej na stronie nr. 4
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE 5. DCP Note: The control panel can be detached to prevent theft. When detaching the control panel, store it in the • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. Source unit / Appareil pilote / Unidad fuente We recommend taking the DCP with you when leaving the car. Names of Buttons Removing the DCP Attaching the DCP 1 OPEN
Streszczenie treści zawartej na stronie nr. 5
Functions of Remote Control Unit Buttons Mode CD changer Radio CD TV Button MD changer * FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Swithes among radio, CD, CD changer, MD changer, AUX, TV, DAB, DSP and DVD. ( BAND Switches reception Plays the first track. Moves the next disc Switches reception DISC UP band. Top play. in increasing order. band. PROG TOP Increases and decreases volume (in all modes). ) VOLUME Á SEARCH Moves preset Moves tracks up Moves track
Streszczenie treści zawartej na stronie nr. 6
English 7. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Radio mode CD mode CD changer mode CAUTION MD changer mode TV mode DVD mode DAB mode DSP mode AUX Be sure to lower the volume before switching mode Radio mode ... off the unit power or the ignition key. The unit remembers its last volume setting. If you * External equipment not connected with CeNET switch the power off with the v
Streszczenie treści zawartej na stronie nr. 7
Basic Operations * When you have entered a title in a CD, it ap- 3. When the adjustment is complete, press A-M pears in the sub display. If you have not en- button @ several times until the function mode tered a title, “NO-TITLE” appears in the title is reached. display instead. For information on how to en- ter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”. Adjusting the MID 1. Press A-M button @ and select “MID” Setting the Beat EQ 2. Turning the Rotar
Streszczenie treści zawartej na stronie nr. 8
English Basic Operations Radio Operations Adjusting the Beat EQ FM reception ® 1. Press BEQ button 7 and select the Beat EQ For enhanced FM performance the mode (1 to 3) to adjust. tuner includes signal actuated stereo control, En- hanced Multi AGC, Impulse noise reduction curcuits 2. Press A-M button @ and select “BEQ”. and Multipath noise reduction circuits. 3. Turning the Rotary knob $ clockwise adjusts in the + direction; turning it counterclockwise Changing the reception area adjusts in th
Streszczenie treści zawartej na stronie nr. 9
Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step Auto store is a function for storing up to 6 sta- tuning. tions that are automatically tuned in sequentially. When you are in the step tuning mode, the fre- If 6 stations cannot be received, a previously quency changes one step at a time. In quick tun- stored station remains unoverwritten at the ing mode, you can quickly tune the desired fre- memory position. quency. 1. Press BND button ! and select the d
Streszczenie treści zawartej na stronie nr. 10
English CD Operations Loading a CD CAUTION 1. Press OPEN button 1 to access the CD in- Be careful not to catch your hand or fingers sertion slot behind the FLIP DOWN PANEL. while closing the FLIP DOWN PANEL. 2. Insert a CD into the center of the insertion Notes: slot with the label side facing up. The CD plays • If the FLIP DOWN PANEL does not open fully, automatically after loading. gently open with your hand. Notes: • After taking out the CD, be sure to close the FLIP • Never insert foreign ob
Streszczenie treści zawartej na stronie nr. 11
CD Operations Other Handy Functions Top function Setting the clock The top function resets the CD player to the first 1. Press and hold ADJ button 2 for 1 second or track of the disc. Press TOP button ! to play the longer to switch to the adjustment selection first track (track No. 1) on the disc. display. 2. Press the right or left side of SEARCH button Scan play % to select “CLOCK”. The scan play locates and plays the first 10 sec- 3. Press ENT button #. onds of each track on a disc automatica
Streszczenie treści zawartej na stronie nr. 12
English Other Handy Functions 6. Press DISP button 0 to select a character. 2. Press the right or left side of SEARCH button Each time you press DISP button 0, the char- % to select “MESSAGE”. acter changes in the following order: 3. Turn the Rotary knob $ clockwise or coun- Capital letters Numbers Symbols terclockwise to set message display ON or Capital letters... OFF. 7. Turn the Rotary knob $ to select the desired 4. Press ADJ button 2 to return to the previous character. Turning the R
Streszczenie treści zawartej na stronie nr. 13
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD When an optional CD changer is connected Each of the Direct button 8 corresponds to a through the CeNET cable, this unit controls all disc loaded into the magazine. the CD changer functions. This unit can control a l Selecting a disc from 1 to 6 total of 2 changers (MD and/or CD). Press the corresponding Direct button 8 (1 to Press FNC button 3 and select the CD changer 6) to select the desired disc. mode to s
Streszczenie treści zawartej na stronie nr. 14
English CD Changer Operations Top function Disc repeat play The top function plays from the first track (track After all the tracks on the current disc have been No. 1) of the disc. played, the disc repeat play automatically replays the current disc over from the first track. This func- l When playing a disc 1 to 6 tion continues automatically until it is canceled. Press the Direct button 8 (1 to 6) with the same 1. Press and hold RPT button 5 for 1 second number as the CD playing. or longer. “D
Streszczenie treści zawartej na stronie nr. 15
MD Changer Operations 2. Each time you press the right side of SEARCH MD changer functions button %, the track advances ahead to the When an optional MD changer is connected beginning of the next track. through the CeNET cable, this unit controls all l Track-down the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). 1. Press the left side of SEARCH button % to move back to the beginning of the current track. Press FNC button 3 and select the MD changer mode to sta
Streszczenie treści zawartej na stronie nr. 16
English MD Changer Operations TV Operations Repeat play TV tuner functions The repeat play continuously plays the current When an optional TV tuner is connected through track. This function continues automatically until the CeNET cable, this unit controls all TV tuner it is canceled. functions. To watch TV requires a TV tuner and monitor. 1. Press RPT button 5. “RPT” lights in the dis- play and the current track is repeated. Watching a TV 2. To cancel the repeat play, press RPT button 5 again. “
Streszczenie treści zawartej na stronie nr. 17
TV Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step Auto store selects 6 TV stations automatically and tuning. stores each one into a preset memory. When you are in the step tuning mode, the If there are not 6 stations with good reception, frequency changes one step at a time. In quick stations previously stored in memory remain and tuning mode, you can quickly tune the desired only the strong stations are stored into memory. frequency. 1. Press BND button !
Streszczenie treści zawartej na stronie nr. 18
English AC Processor Operations DSP control function Selecting the easy mode or the If the DSP (DPH913), sold separately, is con- professional mode nected to this unit using the CeNET cable, all * The factory default setting is “STD”. functions of the AC Processor can be controlled. 1. Press and hold ADJ button 2 for 1 second or longer to switch to the adjustment selection display. DSF functions 2. Press the right or left side of SEARCH button There are 2 modes available in DPH913, STD % to sele
Streszczenie treści zawartej na stronie nr. 19
AC Processor Operations G.EQ effect ON/OFF STD mode/DSF operations While the “G.EQ” indication ´ is lit in the dis- DSF effect ON/OFF play, the G.EQ effect is set to “ON”. * The factory default setting is “ON”. When the “DSF” indication ´ is lit in the display, the DSF effect is set to “ON”. 1. Press A-M button @ and select “G.EQ”. While “G.EQ” is selected, “G.EQ” blinks in the dis- * The factory default setting is “ON”. play. 1. Press A-M button @ and select “DSF”. 2. Press DISP button 0. 2. Pr
Streszczenie treści zawartej na stronie nr. 20
English AC Processor Operations Editing/storing a sound field menu Selecting an VSE menu (User memory) 1. Press A-M button @ and select “VSE”. 1. Select a sound field menu which you want to 2. Press BND button ! to select “BASC” (ba- edit on the basis of. sic). “BASC” is displayed in the function mode 2. Press and hold ADJ button 2 for 1 second or indication 0 in the display. longer. 3. Press one of Direct buttons 8 and select the desired VSE menu. 3. Press the right or left side of SEARCH butto
