Streszczenie treści zawartej na stronie nr. 1
TM
World-Class Auto Security
Streszczenie treści zawartej na stronie nr. 2
All XL Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375 and other patents
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Standard Features of the XL4000 . . . . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 10 How to use your keychain remote control . . . . . . . . . . . . . . . . 10 What each button/channel does . . . . . . . . . . . . . . . . . . . . . 11 How to interpret
Streszczenie treści zawartej na stronie nr. 4
Table of Contents (cont.) How to interpret the LED status indicator . . . . . . . . . . . . . . . 16 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . . . . . 16 AutoLock and AutoUnLock™ . . . . . . . . . . . . . . . . . . . . . 16 Remote controlled sensor adjustments . . . . . . . . . . . . . . . . 17 Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Specific
Streszczenie treści zawartej na stronie nr. 5
Standard Features of the XL4000 ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). ✔ FACT™—False Alarm Control and Test — One of many patented Clifford innovations, FACT absolutely, positively ends recurring false alarms. ✔ A Pair of 4-Button/12-Channel Remote Controls —Fingertip command from a typical range of 100 feet. ✔ AntiScan™ — Some car thieves still use “scanne
Streszczenie treści zawartej na stronie nr. 6
Standard Features of the XL4000 (cont.) ✔ Remotely Adjustable Dual-Zone Piezo Sensor™— With just a touch on the remote, you may, at any time or place, adjust and test the sensitivity of this microprocessor-controlled solid-state sensor. The two sensor zones provide full perimeter protection: If someone bumps into your car, the system will sound a distinctive warning tone; if forced entry is detected, the full alarm will sound. Audible Confirmation of Sensor Adjustments — Issues two chirps for e
Streszczenie treści zawartej na stronie nr. 7
Standard Features of the XL4000 (cont.) ✔ Remote Door Locking/Unlocking with Built-in Relays — No more fumbling with keys in the dark or bad weather! A press of a button on the remote control simultaneously arms your system and locks your vehicle’s power locks. Another press disarms and unlocks. User-Selectable AutoLock™ — Automatically locks the doors the instant you turn on the ignition to start the engine. User-Selectable AutoUnLock™ — Automatically unlocks the doors when you turn off the e
Streszczenie treści zawartej na stronie nr. 8
Standard Features of the XL4000 (cont.) ✔ Multiple-Event TotalRecall™— XL4000’s memory stores the identity of the last eight triggers and/or sensors activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the activated triggers and sensors in reverse chronological order. ✔ Patented Smart Prior Intrusion Attempt Alert — When you return to your vehicle and remotely disarm your XL4000, a special chirp and parking light flash sequence wil
Streszczenie treści zawartej na stronie nr. 9
Standard Features of the XL4000 (cont.) ✔ Enhanced User-Selectable AutoArming™— Automatically arms itself “passively” if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company). AutoArming Enable/Disable — You may disable or re-enable AutoArming with just a few flicks of a switch. AutoArm & Lock™ — You may set the system to automatically lock the doors every time the system AutoArms. Visual Indication — Two parking lights flashes signa
Streszczenie treści zawartej na stronie nr. 10
Standard Features of the XL4000 (cont.) ✔ High-Luminescence LED Status Indicator with Automatic Battery-Saving Mode — Adds visual deterrence and identifies system status. To conserve vehicle battery power, if the system has remained continuously armed for 48 hours, the flash rate will automatically slow to half the normal rate. If left continuously armed for 96 hours, the blink rate will slow to one-quarter the normal rate. ✔ Patented SmartPowerUp™ II — When power to the system is disconnected,
Streszczenie treści zawartej na stronie nr. 11
Welcome to the world of high-technology vehicle security and convenience ongratulations on the purchase of your XL4000 vehicle Csecurity/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories. In fact, Clifford Electronics holds more patents than all other vehicle security manufacturers combined. Buying Clifford has always meant buying the best, and nowhere is our commitment to technologica
Streszczenie treści zawartej na stronie nr. 12
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system. If this happens, repeatedly press the remote control button (this works better than holding the button down). The 4-button/12-channel remote control i
Streszczenie treści zawartej na stronie nr. 13
What each button/channel does Your XL4000 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting Press the How Press channel Causes the system to: LevelShift many button number: butt
Streszczenie treści zawartej na stronie nr. 14
TO ACTIVATE Press button 1 (channel 1) for 3 seconds. The parking lights will THE PANIC flash repeatedly and the siren will blare for 30 or 60 seconds FEATURE . . . . . . . . . . (user-selectable), or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering. If the ignition is off, the doors will unlock, allowing you to enter immediately without fumbling with your keys. TO REMOT
Streszczenie treści zawartej na stronie nr. 15
Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning. Unlike scanners that sequentially transmit one digital code after another until they hit the correct code to disarm the alarm (a process that may take minutes to years depending on the system’s total number of codes), code-
Streszczenie treści zawartej na stronie nr. 16
UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, the driver must first enter a secret valet code on the PlainView switch. If a thief tries guessing your code, after three incorrect entries, the siren will sound
Streszczenie treści zawartej na stronie nr. 17
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all XL Series systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not have any zeros. You can also change your valet code whenever you w
Streszczenie treści zawartej na stronie nr. 18
FACT™— False Alarm Control and Test With FACT, you’ll never experience repeated false alarms. If the Insignia Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration. Before sounding the siren a second time, the system automatically checks for another activated trigger to verify that an intrusion is in progress. Should the siren sound again, you will know for sure that someone is tampering with your vehicle. (To disable FACT, see User-selectable features on
Streszczenie treści zawartej na stronie nr. 19
Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. An improperly adjusted sensor is the most common cause of false alarms. With other alarms, this requires repeated trips back to the dealer. Not so with XL4000. You can adjust sensitivity electronically without tools and without even knowing where the sensor is mounted! If the setting(s) of the Piezo Sensor is either too sensitive or not sensitive enough, you may indivi
Streszczenie treści zawartej na stronie nr. 20
1. Remotely disarm, then turn on the ignition. The LED status indicator inside your vehicle will blink 1-3 times, pause, then repeat. 2. Count the number of blinks in one cycle between pauses (for your convenience, the blink cycle repeats a total of 5 times) and refer to the chart below: Number of LED blinks between pauses Trigger/sensor indication 1 blink Piezo Sensor 2 blinks* Door trigger* 3 blinks Hood or trunk trigger * If your vehicle has a factory-installed feature that turns off or di
