Instrukcja obsługi Grizzly Portable Clamping Workbench G8586

Streszczenie treści zawartej na stronie nr. 1

MODEL G8586
PORTABLE CLAMPING
WORKBENCH
INSTRUCTIONS
Introduction Assembly
This workbench features four adjustable clamping
1.. Attach the crossbars to the leg braces with (8)
dogs for securing flat work, independently adjust-
M6-1 x 40 Phillips head screws, hex nuts and
able hand screws for irregular clamping, and fold-
(16) 6mm flat washers, as show in Figure 2.
ing capability for convenient storage.
Specifications
Weight ......................................................18 lbs.
1
Di

Streszczenie treści zawartej na stronie nr. 2

4.. install the other table bracket on the opposite 7.. install the rubber feet on the legs (Figure 4) end of the table top in a similar manner. so the longest side of each foot is at the cor- ner. 5. Repeat Steps 2-4 to secure the table brack- ets to the bottom of the rear table top. 8.. install the clamping dogs (Figure 4) in the holes on the table tops, as required, to hold 6.. Place the table assembly onto the leg braces, your workpiece. align the mounting holes, then secure with (4) M8