Streszczenie treści zawartej na stronie nr. 1
OM-277 163 768V
June 2000
Processes
Multiprocess Welding
Description
Arc Welding Power Source
Cyber Flex
302 and 452 Models
Streszczenie treści zawartej na stronie nr. 2
From Hobart to You Thank you and congratulations on choosing Hobart. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. This Owner’s Manual is designed to help you get the most out of your Hobart products. Please take time to read the Safety precautions. They will help you protect yourself against potential hazards on the worksite. We’ve made installation and operation quick and easy. With Hobart you can count on years of reliable service with
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Additional Symbols for Installation, Operation, and Maintenance . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING som _nd_5/97 1-1. Symbol Usage Means Warning! Watch Out! There are possible hazards with this procedure! The possible hazards are shown in the adjoining symbols. This group of symbols means Warning! Watch Out! possible Marks a special safety message. ELECTRIC SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult symbols and related instructions below for necessary actions Means “Note”; not safety related. to avoid the hazards. 1-2. Arc Welding
Streszczenie treści zawartej na stronie nr. 6
ARC RAYS can burn eyes and skin. BUILDUP OF GAS can injure or kill. Shut off shielding gas supply when not in use. Arc rays from the welding process produce intense visible and invisible (ultraviolet and infrared) rays Always ventilate confined spaces or use that can burn eyes and skin. Sparks fly off from the approved air-supplied respirator. weld. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 li
Streszczenie treści zawartej na stronie nr. 7
1-3. Additional Symbols for Installation, Operation, and Maintenance FIRE OR EXPLOSION hazard. MOVING PARTS can cause injury. Do not install or place unit on, over, or near Keep away from moving parts such as fans. combustible surfaces. Keep all doors, panels, covers, and guards Do not install unit near flammables. closed and securely in place. Do not overload building wiring – be sure power supply system is properly sized, rated, and protected to handle this unit. FALLING UNIT can cau
Streszczenie treści zawartej na stronie nr. 8
1-5. EMF Information Considerations About Welding And The Effects Of Low Frequency 1. Keep cables close together by twisting or taping them. Electric And Magnetic Fields 2. Arrange cables to one side and away from the operator. Welding current, as it flows through welding cables, will cause electro- magnetic fields. There has been and still is some concern about such 3. Do not coil or drape cables around your body. fields. However, after examining more than 500 studies spanning 17 years of resea
Streszczenie treści zawartej na stronie nr. 9
SECTION 1 – CONSIGNES DE SECURITE – LIRE AVANT UTILISATION som _nd_Fre 4/97 1-1. Signification des symboles Signifie Mise en garde ! Soyez vigilant ! Cette procédure présente des risques de danger ! Ceux-ci sont identifiés par des symboles adjacents aux directives. Ce groupe de symboles signifie Mise en garde ! Soyez vigilant ! Il y a des risques de danger reliés aux CHOCS ÉLECTRIQUES, aux PIÈCES EN Identifie un message de sécurité particulier. MOUVEMENT et aux PIÈCES CHAUDES. Reportez-vous a
Streszczenie treści zawartej na stronie nr. 10
LES RAYONS DE L’ARC peuvent pro- LES ACCUMULATIONS DE GAZ ris- voquer des brûlures dans les yeux et quent de provoquer des blessures ou sur la peau. même la mort. Le rayonnement de l’arc du procédé de soudage Fermer l’alimentation du gaz protecteur en cas de génère des rayons visibles et invisibles intenses non utilisation. (ultraviolets et infrarouges) susceptibles de provoquer des brûlures dans les yeux et sur la peau. Des étincelles sont projetées Veiller toujours à bien aérer les espaces
Streszczenie treści zawartej na stronie nr. 11
1-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance Risque D’INCENDIE OU DES ORGANES MOBILES peuvent D’EXPLOSION. provoquer des blessures. Ne pas placer l’appareil sur, au-dessus ou à proxi- Rester à l’écart des organes mobiles comme le mité de surfaces infllammables. ventilateur. Maintenir fermés et fixement en place les portes, Ne pas installer l’appareil à proximité de produits inflammables panneaux, recouvrements et dispositifs de Ne pa
Streszczenie treści zawartej na stronie nr. 12
1-4. Principales normes de sécurité Safety in Welding and Cutting, norme ANSI Z49.1, de l’American Wel- Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1, ding Society, 550 N.W. Lejeune Rd, Miami FL 33126 de la Compressed Gas Association, 1235 Jefferson Davis Highway, Suite 501, Arlington, VA 22202. Safety and Health Sandards, OSHA 29 CFR 1910, du Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. Règles de sécurité en soudage, coupage et procédés conne
Streszczenie treści zawartej na stronie nr. 13
SECTION 2 – DEFINITIONS 2-1. General Precautionary Label 1/96 Warning! Watch Out! There are possible hazards as shown by the symbols. 1 Electric shock from welding electrode or wiring can kill. 1.1 Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves. 1.2 Protect yourself from electric shock by insulating yourself from work and ground. 1.3 Disconnect input plug or power before working on machine. 1 1.1 1.2 1.3 2 Breathing welding fumes can be hazar
Streszczenie treści zawartej na stronie nr. 14
2-2. Input Connection Label 1/96 12 3 4 1 Warning! Watch Out! There are possible hazards as shown by the symbols. 2 Electric shock from wiring can kill. 3 Disconnect input plug or power before working on machine. 4 Read the Owner’s Manual before working on this machine. 5 Consult rating label for input ? power requirements, and 1 2 V 3 check power available at the job site – they must match. 6 Read Owner’s Manual and inside labels for connection ? V points and procedures. ? A 7 Move jumper links
Streszczenie treści zawartej na stronie nr. 15
2-5. Manufacturer’s Rating Labels For CE Products Match label to one on unit. See Section 3-4. 2-6. Symbols And Definitions Some symbols are found only on CE products. NOTE Amperage/Voltage Gas Tungsten Arc Shielded Metal Arc Amperes Control–Panel Welding (GTAW) Welding (SMAW) A Do Not Switch Gas Metal Arc Temperature Arc Force (DIG) While Welding Welding (GMAW) Output Circuit Breaker Remote Volts V Protective Earth Positive Weld Out- Negative Weld Input (Ground) put Terminal Output Terminal On
Streszczenie treści zawartej na stronie nr. 16
SECTION 3 – INSTALLATION 3-1. Specifications Amperes Input at Rated Load Output Rated Amperage/ 50 or 60 Hz, Three-Phase IP IP Max Max Welding Voltage Model Rating OCV–DC 200 230 380 400 440 460 520 575 Output Range KVA KW V V V V V V V V 15 – 375A 60 VDC In 57.5 50 30 28 26 25 20 20 12.9 -- 300 A @ 32 In CC Mode CC Mode 4.0* 3.5* 1.5* 1.4* 1.3* 1.8* 1.4* 1.4* 0.6* 300 (29) Volts 21M 38 (40) VDC Amp DC, 100% 10 – 32V In 69 60 36 34 31 30 24 23.7 13.4 In -- Duty Cycle CV Mode 4.0* 3.5* 1.4* 1.3*
Streszczenie treści zawartej na stronie nr. 17
3-3. Volt-Ampere Curves Volt-ampere curves show mini- mum and maximum voltage and amperage output capabilities of unit. Curves of other settings fall be- tween curves shown. 300 Amp 450 Amp A. CC Mode A. CC Mode B. CV Mode B. CV Mode va_curve1 – 4/95 – ST-168 912 / ST-168 913 / ST-168 914 / ST-168 915 OM-277 Page 13
Streszczenie treści zawartej na stronie nr. 18
3-4. Selecting A Location 1 Lifting Eye 2 Lifting Forks Use lifting eye or lifting forks to move unit. Movement If using lifting forks, extend forks 1 beyond opposite side of unit. 3 Rating Label (Non CE Models Only) Use rating label to determine input power needs. Label located under OR front access door. 2 4 Plate Label (CE Models Only) Label located under front access door. 5 Rating Label (CE Models 6 Location Only) Use rating label to determine input power needs. Label located on rear 3 acce
Streszczenie treści zawartej na stronie nr. 19
3-6. Tipping Be careful when placing or moving unit over uneven surfaces. 3-7. 115 VAC Receptacle And Circuit Breakers Turn Off power before connecting to receptacle. 1 115 V 15 A AC Receptacle RC9 Power is shared between RC9 and Remote 14 receptacle RC8 or terminal strip 1T (see Section 3-10). 2 Circuit Breaker CB1 3 Circuit Breaker CB2 3 CB1 protects 115 volts ac portion of RC8, 1T, and RC9 from overload. CB2 protects 24 volts ac portion of 2 RC8 and 1T from overload. Press button to reset
Streszczenie treści zawartej na stronie nr. 20
3-8. Weld Output Terminals And Selecting Cable Sizes Total Cable (Copper) Length In Weld Circuit Not Exceeding 150 ft 200 ft 250 ft 300 ft 350 ft 400 ft 100 ft (30 m) Or Less (45 m) (60 m) (70 m) (90 m) (105 m) (120 m) Turn Off power before 10 – 60% Welding 60 – 100% connecting to weld output Duty 10 – 100% Duty Cycle Amperes Duty Cycle terminals. Cycle 100 4 4 4 3 2 1 1/0 1/0 150 3 3 2 1 1/0 2/0 3/0 3/0 200 3 2 1 1/0 2/0 3/0 4/0 4/0 250 2 1 1/0 2/0 3/0 4/0 2-2/0 2-2/0 300 1 1/0 2/0 3/0 4/0 2-2/
