Streszczenie treści zawartej na stronie nr. 1
COMPLETE WEATHER STATION
USER’S MANUAL
TEXAS ELECTRONICS, INC.
5529 Redfield St. Dallas, TX 75235 P.O. Box 7225 Dallas, TX 75209
Phone (214) 631-2490 Fax (214) 631-4218 Toll Free (800) 424-5651
Streszczenie treści zawartej na stronie nr. 2
SERIES 525 RAINFALL SENSORS DESCRIPTION The sensor consists of a gold anodized aluminum collector funnel with a knife-edge that diverts the water to a tipping bucket mechanism. The models TR-525I and TR-525USW are calibrated in inches (.01” per tip) and model TR-525M is calibrated in millimeters (.1mm per tip). A magnet is attached to the tipping bucket, which, as the bucket tips, actuates a magnetic switch. Thus, a momentary switch closure takes place with each tip of the buc
Streszczenie treści zawartej na stronie nr. 3
ORDERING INFORMATION Model # Description TR-525I Rain Gauge, 6.06” collector, English (Please specify for calibration of 0.2 mm/tip) TR-525USW Rain Gauge, 8.00” collector, English TR-525M Rain Gauge, 25 mm collector, Metric Optional Parts / Accessories HOBO Event Datalogger and Software MB-525 Pole Mounting Base FC-525 Field Calibration Kit BB-525 Bird Repellant HT-525 Heater, 120 VAC Cable Additional Cable
Streszczenie treści zawartej na stronie nr. 4
MODEL 525 TIPPING BUCKET RAIN GAUGE TRANSMITTER INSTALLATION INSTRUCTIONS A clear and unobstructed mounting location is necessary to obtain accurate rainfall readings. This transmitter has provisions for mounting two ways, surface mounting and mast mounting. Surface mounting is recommended where possible. The transmitter housing MUST be mounted in a LEVEL position and in a location free from vibration. If mast mounted, make sure that the mast is properly guyed so that vibrati
Streszczenie treści zawartej na stronie nr. 5
FIELD CALIBRATION TR-525I & TR-525M Absolutely accurate calibration can be obtained only with laboratory equipment, but an approximate field check can be easily made. The tipping bucket mechanism is a simple and highly reliable device. The transmitter must be located in a clear area, away from trees, buildings, etc. It must also be mounted level. Accurate readings will not be obtained unless the transmitter is mounted in a level position. The mechanism must be clean. Any accumulati
Streszczenie treści zawartej na stronie nr. 6
MODEL TTH-1315 TEMPERATURE HUMIDITY SENSOR DESCRIPTION The Texas Electronics, Inc. Model TTH-1315 Sensor utilized a Rotronics HygroClip S3 Humidity Temperature Probe with interchangeable sensing elements that do not require calibration. The unit is encased in a corrosive-resistant spun aluminum radiation shield that allows for wind aspiration and protection from the sun's UV rays. The shield is finished in white baked-enamel to provide for virtual cosmetic invisibility while re
Streszczenie treści zawartej na stronie nr. 7
Sampling Time: <0.7 sec Maximum cable length: 5 m / 15 ft. for direct output Up to 100 m / 325 ft. with signal amplifier Bayonet cap on mounting Connection Type: connector Protection grade: IP65 (probe to connector) Supply voltage: 3.5 … 50VDC Current consumption: <4 mA Minimum excitation time: <4 sec EMC compatibility (CE): EN-50081-2, EN-50082-2 Material: Polycarbonate, white Dimensions: Length: 100 mm (3.94") Diameter: 15 mm (0.59") Weight: 14 g / 0.5 oz. FEATURES & BENEFI
Streszczenie treści zawartej na stronie nr. 8
MODEL TD-4 WIND DIRECTION SENSOR DESCRIPTION The Texas Electronics, Inc. TD-4 Wind Direction Sensor is a mechanical style wind meter that measures the horizontal wind azimuth. This unit combines small physical size with superior bearings to meet the EPA's Prevention of Significant Deterioration (PSD) starting threshold requirements. The TD-4 wind direction sensor is a freestanding device for measuring the direction of wind. The sensor consists of a vane and counterweight assemb
Streszczenie treści zawartej na stronie nr. 9
FEATURES & BENEFITS • Superior low starting threshold • Long life hybrid dual wiper potentiometer • No plastic parts for extremely long life • Precision stainless steel bearings for stability and repeatability • Crossarm included with purchase of matching wind speed sensor • Easy installation and maintenance • Over 25 years in production • Lightweight and rugged anodized aluminum exterior INSTALLATION & MAINTENANCE Installation consists of threading the 10-32 mounting bas
Streszczenie treści zawartej na stronie nr. 10
MODEL TV-4 WIND SPEED SENSOR DESCRIPTION The Texas Electronics, Inc. TV-4 Wind Speed Sensor is a mechanical style anemometer that measures the horizontal velocity of wind. This unit combines small physical size with superior bearings to meet the EPA's Prevention of Significant Deterioration (PSD) starting threshold requirements. The TV-4 wind speed sensor is a freestanding device for measuring air velocity. The sensor consists of a lightweight 3-cup anemometer, which electromecha
Streszczenie treści zawartej na stronie nr. 11
Physical: Cup Wheel Diameter: 6.0" (15.3 cm) Overall Height: 4.75" (12.1 cm) Turning Radius: 3.0" (7.6 cm) Cup Diameter: 2.0" (5.1 cm) Bearings: APEC 3 or better Mounting Base: Screw attachment, 10-32 machine screw Weight: 0.5 lbs (0.23 kg) less cable Cable: 60' (18.3 m) 3 conductor 22 gauge Warranty: 3 year FEATURES & BENEFITS • Superior low starting threshold due to small physical size • No plastic parts for extremely long life • Precision stainless
Streszczenie treści zawartej na stronie nr. 12
MODEL SP-LITE SOLAR RADIATION SENSOR DESCRIPTION The Texas Electronics, Inc. SP-Lite Solar Radiation Sensor utilizes a Kipp & Zonen Silicon pyranometer mounted in a white baked-enamel finished aluminum bracket that provides a stable upward-facing installation. It measures the solar energy that is received from the entire hemisphere (180 degrees field of view). The output is expressed in Watts per square meter. The pyranometer is designed for continuous outdoor use. Its calibr
Streszczenie treści zawartej na stronie nr. 13
Mechanical: Material of housing: Anodized aluminum contained in white baked- enamel finished aluminum mounting bracket Cable length: 60 ft. Dimensions: Height from surface to top of level Pyranometer - - 6.25" (15.87 cm) Width - 2.75 " (6.98 cm) Length - 8.25 " (20.95 cm) Weight: 3 lbs. (1.36 kg.) with 60 ft. cable Environmental: Working temperature range - -30° to +70°C (-22° to +158°F) Cable: 60 ft. (18.28 meters) Warranty: 3 year FEATURES & BENEFITS • SP-Lite is an all-w
Streszczenie treści zawartej na stronie nr. 14
C C C CO O O OM M M M.... + + + +1 1 1 12 2 2 2V V V V C CO OM M.. C CO OM M.. S S S SI II IG G G G.... MICRO SWITCH USA U1 Texas Electronics, Inc. Texas Electronics, Inc. Texas Electronics, Inc. Texas Electronics, Inc. P1 P2 5529 Redfield St. 5529 Redfield St. 5529 Redfield St. 5529 Redfield St. Dallas, Tx 75235 Dallas, Tx 75235 Dallas, Tx 75235 Dallas, Tx 75235 C99 C1 C4 Model TB-2012M Barometer Model TB-2012M Barometer Model TB-2012M Barometer Model TB-2012M Barometer C3 U2 D3 R11 R3 R12 R4 T
Streszczenie treści zawartej na stronie nr. 15
FEATURES & BENEFITS • Interfaces to virtually all data acquisition systems • Can be used up to 1800 ft. elevation without factory modification • Over 1800 ft. elevation applications available • Easy installation and maintenance • Over 5 years in production • Weatherproof Nema Enclosure for superior outdoor protection • Wide range of 26" to 32" Hg. or 878 to 1080 mb INSTALLATION & MAINTENANCE Select a site where the instrument will not be subject to rapid fluctuations of tem
Streszczenie treści zawartej na stronie nr. 16
PROPER EXPOSURE OF METEOROLOGICAL INSTRUMENTS Generally recognized guidelines follow which depict "ideal" sensor mounting locations. These guidelines or "rules of thumb" are only suggestive in nature in an attempt to aid the user to selecting optimum representative sampling locations for a particular sensor. Reference was made to US Weather Bureau Installation criteria in preparing this data (See Reference 1). WIND EQUIPMENT: So far as available sites permit, wind sensors shou
Streszczenie treści zawartej na stronie nr. 17
PRECIPITATION GAUGES: Rain gauges should be installed on a level plot of ground, at a distance from any object of at least two and preferably four times the height of the object above the top of the gauge. All types of gauges must be exposed with the rim of the receiver in a horizontal plane and at a level well above the average level of snow surfaces. Roof-mounting of rain gauges should be avoided when possible. Air currents at heights other than at ground level have been observed to
Streszczenie treści zawartej na stronie nr. 18
Step 2: Attach wind vane and counter-weight to the direction sensor head. Loosen the two set screws on the top of the wind vane (upper unit). Insert the vane and counter-weight into the holes. Be sure to press both parts all the way in and make sure the flat areas on each arm face the set-screws. Tighten the set screws. Note: For optimum performance and maximum bearing longevity you may wish to fine-tune the balance of both wind sensors. Place the U-tube flat on a table such that the s
Streszczenie treści zawartej na stronie nr. 19
Two methods of aligning the vane are available. The first method involves loosening the large set screw at the bottom of the wind direction sensor so that it will rotate on the U-arm. Turn the bottom half of the sensor until the compass readings and the indication match then retighten the set screw. The second method involves rotating the entire mast assembly until proper orientation is achieved; this technique is usually easier because of the heights involved but will usually necessitate
Streszczenie treści zawartej na stronie nr. 20
Warranty Texas Electronics, Inc. (hereafter TEI) warrants the equipment manufactured by it to be free from defects in material and workmanship. Upon return, transportation charges prepaid to TEI, within three (3) years of original shipment of sensors and one (1) year of original shipment of electronics, recorders and indicators, TEI will repair or replace, at its option, any equipment which it determines to contain defective material or workmanship, and will return said equipmen
