Streszczenie treści zawartej na stronie nr. 1
OWNER'S MANUAL
O
O
D
o
_m
Reverse Osmosis
_o
System
MODEL NO. 625.385560
_m
UltraFilter 650
O
Caution:
• Warranty
Read and follow all safety rules and operating
instructions before first use of this product.
• Installation
Questions ?
• How It Works
Visit www.KenmoreWater.com
or call toll free 1-800-426-9345 (M - F, 7 AM - 6 PM CST)
• Care Of
Repair or Parts ? Call toll free 1-800-469-4663
• Specifications
See back cover for other Sears service numbers.
• Repair Parts
SAVE THIS MANUAL
System tes
Streszczenie treści zawartej na stronie nr. 2
ONE YEAR FULL WARRANTY ON REVERSE OSMOSIS SYSTEM When installed, operated and maintained according to all instructions supplied with the product, if this Reverse Osmosis System fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair (or replacement if repair proves impossible). This warranty does not include filter cartridges or the Reverse Osmosis membrane, which are expendable items. This warranty applies only
Streszczenie treści zawartej na stronie nr. 3
Unpack and Check Shipment ...................................................................... 4 What Your Reverse Osmosis System Will do ........................................................... 5 Plan Your Installation ........................................................................... 5-6 Overview and Site Preparation ..................................................................... 7 Step I-Install Supply Water Fitting .........................................................
Streszczenie treści zawartej na stronie nr. 4
INSPECT SHIPMENT Your Reverse Osmosis Drinking Water System is shipped complete in one carton. Remove all items from your ship- ping carton. Check all items against the packing list below. Note any items lost or damaged in shipment. Note any damage to the shipping carton. Refer to the exploded view and parts list in the back of the manual for the part names and numbers of missing or damaged items. If problems exist, refer to the website or the toll free number listed through- out this manual. Ke
Streszczenie treści zawartej na stronie nr. 5
Your Reverse Osmosis (RO) Drinking Water System is a water passing through the RO membrane, and just before going to the treatment unit. It uses household water pressure to reverse a RO faucet. To prevent water waste, an automatic shutoff valve natural physical process called osmosis. Water, under pressure, closes when the RO faucet is closed and the storage tank is full. is forced through a semi-permeable membrane where minerals Your reverse osmosis system gives you a continuous supply of and i
Streszczenie treści zawartej na stronie nr. 6
Typical Under Sink Installation All install parts included in package. Drain Adapter for Reverse Osmosis Waste Water Reverse Osmosis Assembly Figure 2 Typical Remote Installation Outside Faucet To (Hard Water) Outside Faucet Reverse Osmosis (Hard Water) Air Gap Faucet Soft, Cold Water Soft, Hot Soft, Cold Water Sediment Filter_ Reverse Osmosis System Storage Tank Water Meter Main Water Air Gap Softener Shutoff It Valve Additional Parts required. Figure 3 Questions? Call The Kenmore Water Line 1-
Streszczenie treści zawartej na stronie nr. 7
OVERVIEW There are seven easy steps to installing your Drinking Water system. They are as follows= STEP 1 - Install Cold Water Supply fitting STEP 2 - Install Drain Adapter STEP 3 - Install Reverse Osmosis Assembly STEP 4 - Install Storage Tank STEP 5 - Install Reverse Osmosis Faucet STEP 6 - Connect Tubing STEP 7 - Sanitize, Pressure Test, Purge System These steps are explained in detail over the next few pages. Figure 4 It is recommended to read through the entire manual before beginning your
Streszczenie treści zawartej na stronie nr. 8
CHOOSE TYPE OF WATER FITTING TO INSTALL Check and comply with local plumbing codes as you plan, then install a cold feed (supply) water fitting. Refer to the Specifications page for supply water requirements. The fitting must provide a leak-tight connection to the RO 1/4" tubing. A typical connection using the included water supply fitting is shown in Figure 5.. An optional connection using standard plumbing fittings (not included) is shown in Figure 5B. NOTE: Local code may dictate which type o
Streszczenie treści zawartej na stronie nr. 9
INTRODUCTION Under The Sink Installation A suitable drain point is needed for the reject water from the Reverse Osmosis Filter. You have two options to Single trap Double Trap choose from: J • Install the Drain Adapter included with your unit See Figures 6, 7 & 8. This is used in under the sink Drain installations. The drain adapter kit is installed onto ! _ Adapter your sink drain pipe above the P-trap. See Figure 6. • Use another existing drain in your home This is usually used in remote locat
Streszczenie treści zawartej na stronie nr. 10
Outside Faucet Outside Faucet (Hard Water) BLUE Tubing to Reverse (Hard Water) Osmosis Air Soft, Cold Water Gap Faucet Soft, Hat Water Line Soft, Cold GREEN Tubing to Reverse Osmosis System Remote Location Sediment Filter Reverse Osmosis Installation YELLOW Tubing to Tank Storage i Storage Tank Water Meter Water Heater Main Shutoff Valve c_ Sump Figure 9 [_ Air_ap W2" Floor Laundry Tub Drain Stand pipe Airgap Figure 10 INSTALL A REMOTE DRAIN POINT AND AIR GAP To install a remote drain point, com
Streszczenie treści zawartej na stronie nr. 11
INSTALL REVERSE OSMOSIS FILTER ASSEMBLY The Reverse Osmosis Filter Assembly can sit upright or lay on its side. When planning your installation, you need to allow adequate tubing lengths to be able to access the back of the Reverse Osmosis assembly in order to change the monitor battery. See Figure 11. Figure 11 INSTALL STORAGE TANK Jr Jj // 1. Apply thread sealing tape to the threads on the nipple / / // at the top of the tank (max. 2 wraps). See Figure 12. 2. Locate the tubing connector. Tight
Streszczenie treści zawartej na stronie nr. 12
SELECT LOCATION OF REVERSE OSMOSIS FAUCET MOUNTING HOLE faucet You will need to select the location of the Reverse Osmosis Faucet. You have three options to choose from: ° Use the existing sink top hole for the spray hose or soap dispenser (Must be 1-1/4" in diameter) ° Drill a new hole in the sink ° Drill a new hole in the countertop next to the sink 1. Determine where you are going to install your Reverse Osmosis Faucet. 2. Check to ensure the Reverse Osmosis faucet will mount flat against the
Streszczenie treści zawartej na stronie nr. 13
NOTE: If you ran the red reverse osmosis drain tubing directly to a remote drain point, disregard steps 5 and 6 and refer to instructions on page 10. 7. Mount the faucet body on to the faucet base, 1/4 turn. jJ BLACK TUBE FAUCET ELECTRONICS 3/8" barb fitting for the black tube The RO system will monitor the total product flow of the unit and also length of time the filters have been installed. The faucet base has an indicator light that TUBE flashes to inform you of the status of the RO membrane
Streszczenie treści zawartej na stronie nr. 14
HOW TO CUT AND CONNECT THE TUBES Your Reverse Osmosis Water System includes push-in fit- tings for quick tubing connection. Review the following instructions before connecting the tubes in the next step. Cut tubes to length 1. Use a sharp cutter or knife to cut the end of tubing. Cut tubing square with end of tubing round, Always cut the tubing square. See Figure 16. smooth, with no cuts, nicks or flat spots. 2. Inspect the end (about 1") of the tubing to be sure there Tube Correctly Cut are no
Streszczenie treści zawartej na stronie nr. 15
NOTE: Tubing lengths should allow access to the back of the assembly for servicing. 3/8" black tubing NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of saddle valves. If you live in the state of 211 ii Massachusetts, review plumbing code 248-CMR of red tubing the Commonwealth of Massachusetts before pro- ceeding with the installation. blue tubing water supply fitting HOT COLD / 1/4" green tubing 3/8" yellow tubing sink p-trap _,_ tu
Streszczenie treści zawartej na stronie nr. 16
SANITIZETHESYSTEM Sanitizing is recommended immediately after installation of the Reverse Osmosis system. It's also recommended after servicing inner parts. It is important that the person ! installing or servicing the system have clean hands while handling inner parts of the system. Complete the following steps to sanitize the system. See Figure 22. 1. Turn off the water supply to the Reverse Osmosis sys- tem. 2. Open the Reverse Osmosis faucet. If the tank is not already empty, allow the water
Streszczenie treści zawartej na stronie nr. 17
Reverse PRESSURE TEST THESYSTEM Osmosis NOTE: Complete the sanitizing procedures on the preced- Faucet ing page before pressure testing. kitchen faucet _ __ To pressure test the system, complete the following steps. 1. Open the water supply valve to the Reverse Osmosis System. See Figure 23. 2. Open the main water supply valve and several house faucets. This will purge air from the house plumbing and system. Close faucets when water runs smooth. See Figure 23. 3. Pressure will start to build in
Streszczenie treści zawartej na stronie nr. 18
HOW YOUR REVERSE OSMOSIS SYSTEM WORKS Introduction: Your Reverse Osmosis (RO) Drinking Water Reverse Osmosis Faucet: The sink or countertop faucet System uses your household water pressure to force water has a hand operated knob to access drinking water. See through three filters. Minerals and impurities are filtered Figure 24. An air-gap is built into the faucet drain water out. Delicious tasting drinking water goes to the storage connection to comply with plumbing codes. See Figure 24. tank-re
Streszczenie treści zawartej na stronie nr. 19
PRODUCT WATER FAUCET air Fq PRODUCT WATER dgravity rain WASTE WATER AUTOMATIC drain flow check SHUTOFF control valve \ WATER O iN GREEN BLUE i POSTFILTER PREFILTER t_ t t IL RED "_ RO YELLOW MEMBRANE IN Reverse Osmosis Water Flow Schematic Figure 24 Water Flow Description 1. Water enters prefilter. Sand, silt and other sediments are reduced. Chlorine is also reduced. 2. Water leaves prefilter and proceeds to the Reverse Osmosis Cartridge. 3. Water enters the Reverse Osmosis membrane. Dissolved s
Streszczenie treści zawartej na stronie nr. 20
PREFILTER/POSTFILTER MAINTENANCE Cover NOTE: It is recommended to replace the battery, prefilter and postfilter cartridges at least every 6 months of prod- uct water use. Replace more often if they begin to plug with sediments. The prefilter and postfilter are replaceable sediment car- Turn to the left tridges with activated carbon in its composition. See to remove Figure 25. You must periodically replace the prefilter and postfilter cartridge. This will protect the RO membrane from being destro
