Streszczenie treści zawartej na stronie nr. 1
Planning Information
Models DD45I and DD45R Downdraft Systems
Top cover 9" (229) chimney
elevation
Model DD45I
Internal Blower
Three-speed blower
control
Model DD45R
Remote-mounted
In-Line or
control module
Remote Blower
Aluminum mesh Stainless steel filter Location of rating
filters covers plate
Model DD45I 45" (1143) downdraft The cooktop downdraft unit rises from the countertop
ventilation system includes a 500 CFM
to whisk away odors and smoke into the easy-to-clean,
internal blower. In-li
Streszczenie treści zawartej na stronie nr. 2
Planning Information Models DD45I and DD45R Downdraft Systems FEATURES Control module and top cover are available in LED indicators the classic stainless steel finish only 9" (229) chimney elevation Remote-mounted control module Control module, top cover, mounting Internal, in-line and remote blower options brackets, DIN connector and necessary hardware included with the downdraft Three-speed blower control UL listed to US and Canadian safety Filter clean timer lets you know when the standards
Streszczenie treści zawartej na stronie nr. 3
Planning Information Models DD45I and DD45R Downdraft Systems MODEL OPTIONS SPECIFICATIONS 1 Downdraft with 500 CFM Overall Width 45 /2" (1156) Internal Blower Included DD45I 1 Overall Height (above countertop) 9 /16" (230) Downdraft Only — In-Line or 3 Overall Depth 2 /8" (60) Remote Blower Required DD45R 1 Duct Size (Model DD45I) 3 /4" (83) x 10" (254) Control module, top cover, mounting 1 brackets, DIN connector and mounting Duct Size (Model DD45R) 3 /4" (83) x 14" (356) hardware included wit
Streszczenie treści zawartej na stronie nr. 4
Planning Information Models DD45I and DD45R Downdraft Systems 1 25 /8" MIN (638) 3 1 /4" MIN (45) OF FLAT COUNTERTOP* BACK EDGE OF COOKTOP 5 /8" 1 TO INSIDE OF 2 /2" MIN (16) 1 CABINET BACK* 19 /4" (489) (64) COOKTOP CUT-OUT WITH NO DEPTH RAISED LIP* .344" 3 2 /8" (60) 11 7 /16" 1 2 /8" (54) (197) 1 3 /4" (83) 5 29 /16" (745) COUNTERTOP 5 TO BOTTOM OF 3 /8" 36" AIR BOX (92) (914) 18" 5" (127) (457) 1 7 /8" (181) 24" MIN (610) CABINET DEPTH *AREAS OF POTENTIAL INTERFERENCE LOCATION OF ELECTRICA
Streszczenie treści zawartej na stronie nr. 5
Planning Information Models DD45I and DD45R Downdraft Systems INSTALLATION NOTES Refer to the illustrations and specifications Wolf downdraft ventilation systems require a for overall dimensions and installation specifics. separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 Wolf downdraft ventilation systems are amp circuit breaker and a grounded 3-prong recommended for use with Wolf electric and receptacle should be located within the reach of gas cooktops and in
Streszczenie treści zawartej na stronie nr. 6
Planning Information Models DD45I and DD45R Downdraft Systems DUCTING CONSIDERATIONS Except for Models DD30I, DD36I and DD45I, Wolf downdraft systems have an adjustable which include a 500 CFM internal blower, Wolf discharge that will allow you to negotiate downdrafts are shipped without the blower ducting around floor joists and other obstacles. assembly. In-line and remote blower assemblies Three different discharge locations are available are available through your Wolf dealer. To obtain with
Streszczenie treści zawartej na stronie nr. 7
Planning Information Models DD45I and DD45R Downdraft Systems DUCTING CONSIDERATIONS For best performance, 10" (254) round ductwork Choose the ducting option that allows the is recommended. The downdraft will operate shortest length of ductwork and a minimum most efficiently when ductwork does not exceed number of elbows and transitions. Refer to the 40' (12 m) in length. Consult a qualified HVAC illustration below for ducting options. engineer for specific ducting applications. Refer to the coo
Streszczenie treści zawartej na stronie nr. 8
Planning Information Wolf Ventilation Recommendations WOLF BLOWER ASSEMBLIES A ventilation system must include a blower IMPORTANT NOTE: Use only a Wolf blower assembly. With a few exceptions where internal with all Wolf ventilation products. blowers are included, Wolf ventilation hoods and Internal blowers are mounted inside the hood downdrafts are shipped without the blower canopy or downdraft blower box. In-line blowers assembly. An internal, in-line or remote blower are mounted in between the
Streszczenie treści zawartej na stronie nr. 9
Planning Information Wolf Cooktop Ventilation Recommendations COOKTOP VENTILATION CFM RECOMMENDATIONS Cooktop Hoods, Downdrafts and Pro Hoods CTWH30 CTWH36 IH4227 DD30 DD36 DD45 Pro Hoods Electric Cooktops Model CT15E 215* 215* 215* 215* 150* 215* Model CT30E 450 600 600 500 350 600 Model CT30EU 450 600 600 600 Model CT36E 600 600 500 600 Model CT36EU 600 600 600 CTWH30 CTWH36 IH4227 DD30 DD36 DD45 Pro Hoods Gas Cooktops Model CT15G 215* 215* 215* 215* 150* 215* Model CT30G 450 600 600 500 350 6
