Streszczenie treści zawartej na stronie nr. 1
14-1111.fm Page 1 Thursday, July 1, 1999 12:55 PM
Cat. No. 14-1111
OWNER’S MANUAL
Please read before using this equipment.
CTR-106
Voice-Activated
Cassette Tape Recorder
Streszczenie treści zawartej na stronie nr. 2
14-1111.fm Page 2 Thursday, July 1, 1999 12:55 PM FEATURES Your Optimus CTR-106 Voice-Activated Cassette Tape Recorder gives you a convenient and reliable way to record live audio. You can manually start recording or set the CTR-106 to automatically start recording when the re- corder picks up sound. Because the CTR-106 does not record long periods of si- lence, you not only save tape space and battery power, you also save time when you try to find a certain section on the tape. Your recorder
Streszczenie treści zawartej na stronie nr. 3
14-1111.fm Page 3 Thursday, July 1, 1999 12:55 PM Automatic Level Control (ALC) Circuit — automatically adjusts to the proper recording level. Auto Stop — during playback and recording, stops the recorder and releases the tape mechanism when the tape reaches the end, to save battery power and protect your cassette tape. Three-Way Power — lets you operate your cassette re- corder using internal batteries, an AC outlet (using an op- tional adapter), or your vehicle’s cigarette-lighter socket (u
Streszczenie treści zawartej na stronie nr. 4
14-1111.fm Page 4 Thursday, July 1, 1999 12:55 PM CONTENTS Preparation .................................................................. 5 Powering the Recorder ........................................... 5 Using Internal Battery Power ........................... 5 Using AC Power ............................................... 7 Using DC Power .............................................. 9 Using the Earphone .............................................. 11 Listening Safely ...............
Streszczenie treści zawartej na stronie nr. 5
14-1111.fm Page 5 Thursday, July 1, 1999 12:55 PM PREPARATION POWERING THE RECORDER For portable use, you can power the recorder from inter- nal batteries. You can also power it from a standard AC outlet or your vehicle’s cigarette-lighter socket. Using Internal Battery Power The recorder uses two AA batteries. For the best results, we recommend alkaline batteries, such as RadioShack Cat. No. 23-552. Or, you can use rechargeable nickel- cadmium batteries, such as Cat. No. 23-125, with a bat-
Streszczenie treści zawartej na stronie nr. 6
14-1111.fm Page 6 Thursday, July 1, 1999 12:55 PM Follow these steps to install batteries. Illust. 1. Slide the battery compartment cover in the direction shown by the arrow on the cover. 2. Install two AA batteries as indicated by the polarity symbols (+ and –) marked on the back of the recorder. 3. Replace the cover. Cautions: • If you do not plan to use the recorder for a week or more, or you plan to use only another power source, remove the batteries. • Always dispose of old batteries pro
Streszczenie treści zawartej na stronie nr. 7
14-1111.fm Page 7 Thursday, July 1, 1999 12:55 PM Important: Your recorder is capable of using recharge- able nickel-cadmium batteries. At the end of the batteries’ useful life, they must be recycled or disposed of properly. Contact your local, county, or state hazardous waste management authorities for information on recycling or disposal programs in your area. Some options that might be available are: municipal curbside collection, drop-off boxes at retailers, recycling collection centers,
Streszczenie treści zawartej na stronie nr. 8
14-1111.fm Page 8 Thursday, July 1, 1999 12:55 PM • Always plug the adapter into the recorder before you plug it into the AC outlet. Always unplug the adapter from the AC outlet before you unplug it from the recorder. Illust. 1. Set the adapter’s voltage switch to 3V. 2. Attach the 3.4 mm outer diameter/1.3 mm inner diameter barrel plug to the AC adapter’s cord with the tip set to negative (–). 3. Insert the plug into the recorder’s DC 3V jack. 4. Plug the adapter into a standard AC outlet. 8
Streszczenie treści zawartej na stronie nr. 9
14-1111.fm Page 9 Thursday, July 1, 1999 12:55 PM Using DC Power To power the recorder from your vehicle’s cigarette-lighter socket, you need a DC adapter (not supplied), such as Cat. No. 270-1560. Cautions: • You must use an adapter that supplies 3 volts and delivers at least 300 milliamps. Its center tip must be set to negative, and it must have a plug that properly fits the CTR-106’s DC 3V jack. The recommended adapter meets these specifications. Using an adapter that does not meet these s
Streszczenie treści zawartej na stronie nr. 10
14-1111.fm Page 10 Thursday, July 1, 1999 12:55 PM Follow these steps to power the recorder from your vehi- cle’s cigarette-lighter socket. Illust. 1. Set the adapter’s voltage switch to 3V. 2. Attach the 3.4 mm outer diameter/1.3 mm inner diameter barrel plug to the DC adapter’s cord with the tip set to negative (–). 3. Insert the plug into the recorder’s DC 3V jack. 4. Plug the adapter into the vehicle’s cigarette-lighter socket. If the recorder does not operate properly when Note: powered
Streszczenie treści zawartej na stronie nr. 11
14-1111.fm Page 11 Thursday, July 1, 1999 12:55 PM USING THE EARPHONE You can use the earphone for private listening. You can also monitor a recording and check the microphone’s sensitivity (see “Using Voice Activation (VOX)” on Page16). 1 8 EAR Insert the earphone’s / -inch plug into the jack. Illust. Note: Connecting the earphone disconnects the record- er’s built-in speaker. 11
Streszczenie treści zawartej na stronie nr. 12
14-1111.fm Page 12 Thursday, July 1, 1999 12:55 PM Listening Safely To protect your hearing, follow these guidelines when you use an earphone. • Do not listen at extremely high volume levels. Extended high-volume listening can lead to perma- nent hearing loss. • Set the volume to its lowest level before you begin listening. After you put on the earphone, adjust the volume to a comfortable listening level. • Do not increase the volume once you have estab- lished a comfortable listening level.
Streszczenie treści zawartej na stronie nr. 13
14-1111.fm Page 13 Thursday, July 1, 1999 12:55 PM OPERATION LOADING A CASSETTE TAPE 1. Take up any slack in the cassette tape by turning the hub with a pencil to prevent the tape from becoming tangled in the tape mechanism. Do not touch the tape. Illust. 2. Open the cassette compartment door by lifting it at the notch. Insert a cassette tape into the door guides so the cassette’s open edge faces out, the side you want to play or record on faces the compartment win- dow, and the full reel is
Streszczenie treści zawartej na stronie nr. 14
14-1111.fm Page 14 Thursday, July 1, 1999 12:55 PM PLAYING A TAPE 1. Load a cassette. PLAY 2.Press . Illust. 3. Adjust VOLUME to the desired level. Illust. 4. To stop the tape, press STOP or let the tape auto- matically stop when it reaches the end. 14
Streszczenie treści zawartej na stronie nr. 15
14-1111.fm Page 15 Thursday, July 1, 1999 12:55 PM USING FAST-F AND REWIND FAST-F To rapidly advance or rewind the tape, press REWIND or . The button locks, and the tape fast-for- STOP wards or rewinds to the end or until you press . STOP When the tape reaches the end, press to re- lease the button and the tape-handling parts. Illust. USING THE TAPE COUNTER The tape counter shows you the tape’s current playing position, making it easier to locate a particular segment. Before you play a
Streszczenie treści zawartej na stronie nr. 16
14-1111.fm Page 16 Thursday, July 1, 1999 12:55 PM RECORDING Notes: • We recommend you use normal bias (Type I) cas- sette tapes, such as RadioShack LN and XR tape. • We recommend regular length (60- or 90-minute) cassette tapes. We do not recommend long-play cas- sette tapes, such as C-120s, because they are thin and can easily tangle. • The ALC (automatic level control) circuit automati- VOLUME cally sets the recording level. has no effect. Caution: RECORD Never try to force down after
Streszczenie treści zawartej na stronie nr. 17
14-1111.fm Page 17 Thursday, July 1, 1999 12:55 PM 3.Press RECORD. Recording begins when the voice- activation mechanism detects a sound. Illust. 4. To cause soft sound levels to activate recording, rotate VOLUME/VOX SENS toward MAX. To automati- cally record only louder sounds, rotate VOLUME/VOX SENS toward MIN. (This does not change the volume of the recording.) The RECORD BATTERY indicator lights during recording. The louder the sound, the brighter the indi- cator glows. Manual Recording
Streszczenie treści zawartej na stronie nr. 18
14-1111.fm Page 18 Thursday, July 1, 1999 12:55 PM TAPE TIPS Restoring Tape Tension and Sound Quality After you play a cassette tape several times, the tape might become tightly wound on the reels. This can cause playback sound quality to deteriorate. To restore the sound quality, fast-forward the tape from the beginning to the end of one side, then completely re- wind it. Then loosen the tape reels by gently tapping each side of the cassette’s outer shell on a flat surface. Caution: Be caref
Streszczenie treści zawartej na stronie nr. 19
14-1111.fm Page 19 Thursday, July 1, 1999 12:55 PM If you later decide to record on a tape side after you have removed the erase-protection tab, place a piece of strong plastic tape over that side’s erase-protection hole. Be sure you cover only the hole originally covered by the erase-protection tab. Illust. Caution: Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape. Erasing a Cassette Tape To record over a cassette tape, simply record as usual. Th
Streszczenie treści zawartej na stronie nr. 20
14-1111.fm Page 20 Thursday, July 1, 1999 12:55 PM MAINTENANCE Your CTR-106 Voice-Activated Cassette Tape Recorder is an example of superior design and craftsmanship. The following suggestions will help you care for your recorder so you can enjoy it for years. Keep the recorder dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic cir- cuits. Use and store the recorder only in normal temperature environments. Temperature extremes can shor
