Instrukcja obsługi Greenheck Fan Steel 3V Blades OFSD-212

Streszczenie treści zawartej na stronie nr. 1

Model OFSd-212
Out Of Wall Combination FIRE SMOKE dAMPERS
APPLICATION
Steel 3V Blades
Model OFSD-212 is an ‘out of the wall’ high performance combina-
UL 555S Leakage Class II
tion fire smoke damper with 3V style blades. OFSD-212 is approved
1
UL555 1 ⁄2 Hour Fire Resistance Rating
for use in walls, partitions, and floors with fire resistance ratings less
Horizontal or Vertical Mount
than 3 hours. Removal of wall grille allows access to actuator and
other components. This model's operational

Streszczenie treści zawartej na stronie nr. 2

Pressure drop data OFSd-212 This pressure drop testing was conducted in accordance with AMCA Standard 500-D using the three configurations shown. All 3 3 data has been corrected to represent standard air at a density of .075 lb/ft (1.201 kg/m ). Actual pressure drop found in any HVAC system is a combination of many factors. This pressure drop information along with an analysis of other system influences should be used to estimate actual pressure losses for a damper installed in a given HVAC

Streszczenie treści zawartej na stronie nr. 3

5D 6D Figure 5.3 AMCA 5.2 Pressure drop OFSd-212 5D 4 (W) (H) = D 3.14 Figure 5.2 Figure 5. 5 * This size is based on multi-section unit. 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) 48 in. x 12 in. (1219mm x 305mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) (in. wg)

Streszczenie treści zawartej na stronie nr. 4

AMCA 5.3 Pressure drop OFSd-212 5D 6D Figure 5.3 5D 4 (W) (H) = D 3.14 Figure 5.2 Figure 5. 5 * This size is based on multi-section unit. 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) 48 in. x 12 in. (1219mm x 305mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) Velocity (fpm) (in. wg)

Streszczenie treści zawartej na stronie nr. 5

5D 6D 5D 4 (W) (H) D 3.14 AMCA 5.5 Pressure drop OFSd-212 * This size is based on multi-section unit. 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) 48 in. x 12 in. (1219mm x 305mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) (in. wg) 500 0.04 500 0.06 500 0.03 500 0.03

Streszczenie treści zawartej na stronie nr. 6

Application data OFSd-212 Actuator Space Envelopes The drawing below and corresponding table show the minimum dimensions required for internal actuator mounting on OFSD-212s. The standard mounting locations provide enough space for the mounting of actuators and controls plus allowing space for a grille and duct connection (see Sleeve Length below). Factory supplied thermal blanket around sleeve Honeywell Actuator Space ML-4XXX series MS4120 series Envelopes MS4XXX series X Grille (Suppl