Streszczenie treści zawartej na stronie nr. 1
LM-2010 / 2110
LCD Monitor
User’s Manual
Rev. A0
I. FEATURES
• Light weight and high luminance LCD monitor for industrial and
commercial use
• Application covers POS, POIS (Kiosk), factory Automation etc.
• High quality 10.4” TFT LCD panel with scaling up function for full screen
display
• Supports display resolution up to 800 x 600 pixels
• Tilt adjustable construction
• Spill proof and easy maintenance structure allowing easy cleaning
FCC NOTICE
This equipment genera
Streszczenie treści zawartej na stronie nr. 2
II. MODEL NUMBERS LM-2110: 10.4” LCD Monitor w/ stand LM-2010: 10.4” LCD Monitor w/ support bracket for Posiflex hybrid terminals HT series III. CARTON CONTENTS 1. LCD Monitor panel unit 2. Base stand (for LM-2110) or support bracket (for LM-2010) 3. Fixing screws (2x for LM-2010, 6x for LM-2110) 4. User’s Manual 5. VGA cable: 21867244100 (for LM-2110) or 21863241730 (for LM- 2010) 6. Power adaptor: ASP0P042WTB001 & power cord (for LM-2110) IV. INSTALLATION 1. Use 2 fixing scre
Streszczenie treści zawartej na stronie nr. 3
accompanying drawings. Screw Hole Cover Screw Hole VGA Cable Hole Cover Bridge HT Cable Cover Pole Cover Bridge Use proper tool to cut the bridges off with the screw hole cover and VGA cable hole cover from the top cover and pole cover at points indicated by each pair of arrows in the drawings. Sand/Cut smooth the inside of the holes resulted. In the HT system, please arrange the VGA power to be supplied through the interface cable from the main unit through inter
Streszczenie treści zawartej na stronie nr. 4
4. Adjust for best viewing tilt angle and engage the on screen display (OSD) adjustment for best display effect whenever necessary. The monitor will sign for “No Signal” status and go into power saving mode in 5 seconds when there is no video signal. The display will come back when the signal does. V. OSD A. OSD buttons “OSD” button: To enter OSD setup menu, or to perform function selected in OSD operation. “NXT” button: To go to next option function. “” “” button: To increase s
Streszczenie treści zawartej na stronie nr. 5
“BRIGHTNESS / CONTRAST ADJUST SUBMENU”: There are 3 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among brightness, contrast and exit. “BRIGHTNESS ADJUST”: When this item is selected, there will be only the brightness icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” button to increase brightness. Press “-” to decrease. Press “OSD” button to save the cu
Streszczenie treści zawartej na stronie nr. 6
“SEPARATE COLOR ADJUST”: When this item is selected, there will be 3 adjustment indication bars between the main menu area and the video signal mode. Press “NXT” button to select among the 3 colors Red, Green and Blue respectively. Press “+” button to intensify that color. Press “ -” to reduce. Press “OSD” button to save the current setting and return to “Color balance adjust submenu”. “4200K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 4200
Streszczenie treści zawartej na stronie nr. 7
adjust submenu”. “HORIZONTAL POSITION”: When this item is selected, there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” or “-” button to shift the screen display to right or left. Press “OSD” button to save the current setting and return to “Geometry adjust submenu”. “VERTICAL POSITION”: When this item is selected, there will be only the vertical position icon with an adjustment indic
Streszczenie treści zawartej na stronie nr. 8
“RESET TO DEFAULT”: Pressing “OSD” button on this icon will set all parameters back to the status when the monitor left factory. “SMOOTHNESS / SHARPNESS ADJUST”: When this item is selected, there will be only the smoothness / sharpness adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” button to increase smoothness of display (decrease sharpness). Press “-” to go the other way. Press “OSD” button to save the current set
Streszczenie treści zawartej na stronie nr. 9
Part 9
Streszczenie treści zawartej na stronie nr. 10
T31454 Part 10
