Streszczenie treści zawartej na stronie nr. 1
User's Manual
MultiSync LCD1970V
MultiSync LCD1970VX
MultiSync LCD1970NX
Streszczenie treści zawartej na stronie nr. 2
Index Warning .................................................................................................................... 1 Contents ...................................................................................................................2 Display Setup ...........................................................................................................3 Mounting .........................................................................................................
Streszczenie treści zawartej na stronie nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UN
Streszczenie treści zawartej na stronie nr. 4
Contents ® Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1970V, LCD1970VX or LCD1970NX monitor with height adjustable stand • Power Cord • User’s Manual • USB Cable (NX only) • Cable Management Cover • Video Signal Cable (mini D-SUB 15 pin to mini D-SUB 15 pin) • Video Signal Cable (DVI-D to DVI-D) (NX and VX only) Cable Management Cover Power Cord USB Cable (NX only) DVI-D Cable (NX and VX only) User's Manual MultiSync LCD1970V MultiSync LCD1970
Streszczenie treści zawartej na stronie nr. 5
Display Setup ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output (NX and VX only): Connect the DVI signal cable to the connector of the display card in your system (Figure 1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure 2). Tighten all screws. For MAC setup: Connect the
Streszczenie treści zawartej na stronie nr. 6
Display Setup -continued Figure 1 Figure 2 Figure 3 DVI Signal Cable Macintosh Cable Adapter (not included) (NX and VX only) Note: Some Macintosh systems do not require a Macintosh Cable Adapter 30• Tilt Figure 4 B Type Highest Stand B Type USB Device Position Figure 4-1 Input2(D-Sub) DVI Cable USB (NX only) Input1(DVI) Power cord (NX only) DC-OUT NEC optional product atttachment. Do not use this connector unless specified. Figure 6 Figure 5 D-SUB Cable USB Cable DVI Cable (Top) Power Cable (B
Streszczenie treści zawartej na stronie nr. 7
Display Setup -continued Figure 7 Figure 8 Figure 9 Figure 11 Figure 10 OFF Position Vacation Switch ON Position Power Button 5
Streszczenie treści zawartej na stronie nr. 8
Display Setup -continued Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). NOTE: Handle with care when tilting and swiveling the monitor screen. Fig
Streszczenie treści zawartej na stronie nr. 9
Mounting Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure M.1). NOTE: If you have difficulty removing the cable cover, please push the cover up (towards the top of the monitor) in order to unhook the cover from the stand, then remove, as shown in (Figure). Handle with care when removing cable cover. Figure 2. Disconnect all cables. 3. Plac
Streszczenie treści zawartej na stronie nr. 10
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instruction on how to Remove Monitor Stand for Mounting to remove the stand. 2. Use the 4 screws from the stand removal to attach the arm to the monitor (Figure F.1 ). NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability
Streszczenie treści zawartej na stronie nr. 11
Controls ® OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right, Down, Up). To change signal input, press the SELECT button (NX and VX only). NOTE: OSM must be closed in order to change signal input. Button Menu MENU/EXIT Exits the OSM controls. Exits to the OSM main menu. Left/Right Moves the highlighted area left/right to select control menus. Moves the bar left/right to incre
Streszczenie treści zawartej na stronie nr. 12
Controls -continued � AccuColor Control Systems ® AccuColor Control Systems: Six color presets select the desired color setting (sRGB and NATIVE color presets are standard and cannot be changed). R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. NATIVE: Original color presented by the LCD panel that is unadjustable. sRGB: sRGB mode dramati
Streszczenie treści zawartej na stronie nr. 13
Controls -continued ® OSM Warning: OSM Warning menus disappear with Exit button. NO SIGNAL: This functin gives a warming when there is no signal present.After power is tuned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER: This function gives a warming if the monitor is using a resolution other than the optimized resolution. After power is turned on or when there is a change of input signal or the
Streszczenie treści zawartej na stronie nr. 14
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the c
Streszczenie treści zawartej na stronie nr. 15
Recommended Use -continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no fur
Streszczenie treści zawartej na stronie nr. 16
Specifications TM ® Monitor MultiSync LCD1970V Notes Specifications Monitor LCD Module Diagonal : 19.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 19.0 inch liquid crystal display (LCD); 0.294 mm dot 2 Native Resolution (Pixel Count) : 1280 x1024 pitch; 250cd/m white luminence; 450:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Posit
Streszczenie treści zawartej na stronie nr. 17
Specifications-continued TM ® Monitor MultiSync LCD1970VX Notes Specifications Monitor LCD Module Diagonal : 19.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 19.0 inch liquid crystal display (LCD); 0.294 mm dot 2 Native Resolution (Pixel Count) : 1280 x1024 pitch; 250cd/m white luminence; 450:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input : DVI Sync : Separate sync. TTL Level Horizontal
Streszczenie treści zawartej na stronie nr. 18
Specifi cations -continued Monitor MultiSync LCD1970NX Notes Specifi cations Monitor ! " # $ % & ’ ( ) ( * + * , - . */ *+ ) *0 1 " / 2 () $ ) % ! , 34 5 !)6)157 3 $ ) !$ %(
Streszczenie treści zawartej na stronie nr. 19
Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-clear text deliver a comfortable viewing experi- ence. No Touch Auto Adjust™ automatically adjusts your optimal image settings upon initial power-on. ® AccuColor Control System allows you to change between six color settings on your dis- play to match your personal preference. ® Redesigned OSM controls allow you to quickly and easily adjust all elements of yo
Streszczenie treści zawartej na stronie nr. 20
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Make sure the Vacation Switch is in the ON position. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or sys- tem being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and
