Instrukcja obsługi Hitachi RAS-14KH2

Streszczenie treści zawartej na stronie nr. 1

280mm
THE CHOICE OF MOUNTING SITE (Please note the following matters and obtain permission from customer before installation).
FOR SERVICE PERSONNEL ONLY
! WARNING ! WARNING




The unit should be mounted at stable, non-vibratory location which The Outdoor unit must be mounted at a location which can sup-
Carefully read through the procedures of proper
can provide full support to the unit. port heavy weight. Otherwise, noise and vibration will increase.
installation before starting installati

Streszczenie treści zawartej na stronie nr. 2

Please mount the Outdoor unit on stable ground to prevent vibration 1 Preparation of Pipe 3 Removal Of Air From The Pipe And Gas Leakage Inspection and increase of noise level.
Decide the location for piping after sorting out the different types of
Use a pipe cutter to cut the copper pipe. pipe available. Procedures of using Vacuum Pump for Air Removal
When removing side cover, please pull the handle after undoing the Trimming tool When the meter reaches - 101KPa hook by pulling it dow