Streszczenie treści zawartej na stronie nr. 1
DDX5032
DDX5032M
MONITOR WITH DVD RECEIVER
INSTALLATION MANUAL
© B54-4620-00/00 (MW/M2W/XW)
Streszczenie treści zawartej na stronie nr. 2
Accessories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 5 ..........6 6 ..........6 7 ..........1 | 2 DDX5032/DDX5032M
Streszczenie treści zawartej na stronie nr. 3
Installation Procedure 1. To prevent a short circuit, remove the key from the € ignition and disconnect the - battery. • Mounting and wiring this product requires skills and 2. Make the proper input and output wire experience. For safety’s sake, leave the mounting and wiring connections for each unit. work to professionals. 3. Connect the speaker wires of the wiring harness. • Make sure to ground the unit to a negative 12V DC power 4. Connect the wiring harness wires in the following supply
Streszczenie treści zawartej na stronie nr. 4
Connection If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) Ground wire (Black) - (To car chassis) C C Antenna Cord Battery Connect to the vehicle's parking brake detection switch harness. Park
Streszczenie treści zawartej na stronie nr. 5
Cooling fan FUSE ( 15A ) FM/AM antenna input Wiring harness (Accessory1) REVERSE REMO.CONT White/Black To front left speaker + White Gray/Black ILLUMI To front right speaker + Gray Green/Black MUTE To rear left speaker + Green Purple/Black To rear right speaker + ANT. CONT Purple P CONT | English 5 REAR L REAR R FRONT R FRONT L
Streszczenie treści zawartej na stronie nr. 6
System Connection USB device USB terminal (commercially available) Do not connect. ■ Audio Input Resistance-free stereo type mini plug ■ Visual Input Resistance-free mini plug ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout/ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Audio/Visual Output • Audio left output (White) • Audio
Streszczenie treści zawartej na stronie nr. 7
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Visual Output (Yellow) Visual Input (Yellow) USB terminal USB terminal Navigation System (Optional Accessory) Audio Input (Black) KCA-BT200 input (Optional Accessory) TV Tuner (Optional Accessory) Connection cable (Included in the Navigation System) Connection cable (Included in the TV tuner) | English 7 TO MONITOR UNIT TV ANTEN
Streszczenie treści zawartej na stronie nr. 8
Installing the Escutcheon For General Motors 1. Cut out accessory 3 to meet the shape of Cut out to meet the shape of the opening of the center console. the opening in the vehicle. 2. Attach accessory 3 to the unit. Accessory 3 For Volkswagen 1. Attach accessory 7 to the unit. Accessory 7 | 8 DDX5032/DDX5032M
Streszczenie treści zawartej na stronie nr. 9
For Toyota/Scion 1. Cut out accessory 3 as illustrated. Cutting line Accessory 3 2. Fold double-sided adhesive (accessory 4) along the slit and attach it to Accessory 4 accessory 3 cut-out against the center rib as illustrated. Use 2 pieces of accessory 4 for 1 accessory 3 cut- out. 3. Attach accessory 3 cut-out to the unit. | English 9
Streszczenie treści zawartej na stronie nr. 10
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 5 (M5x
Streszczenie treści zawartej na stronie nr. 11
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 2 deeply into the Remo
Streszczenie treści zawartej na stronie nr. 12
1 ..........1 2 ..........2 3 ..........1 4 ..........1 5 ..........6 6 ..........6 7 ..........1 | 12 DDX5032/DDX5032M
Streszczenie treści zawartej na stronie nr. 13
€ - - 2 - + - | 13
Streszczenie treści zawartej na stronie nr. 14
A B A B - C C PRK SW | 14 DDX5032/DDX5032M – +
Streszczenie treści zawartej na stronie nr. 15
1 REVERSE REMO.CONT + ILLUMI + MUTE + + ANT. CONT P CONT | 15 REAR L REAR R FRONT R FRONT L
Streszczenie treści zawartej na stronie nr. 16
| 16 DDX5032/DDX5032M
Streszczenie treści zawartej na stronie nr. 17
| 17 TO MONITOR UNIT TV ANTENNA INPUT
Streszczenie treści zawartej na stronie nr. 18
3 3 3 7 7 | 18 DDX5032/DDX5032M
Streszczenie treści zawartej na stronie nr. 19
3 3 4 4 3 4 3 3 | 19
Streszczenie treści zawartej na stronie nr. 20
5 6 5 6 | 20 DDX5032/DDX5032M
