Instrukcja obsługi JVC TM-H1950CG

Streszczenie treści zawartej na stronie nr. 1

COLOR VIDEO MONITOR
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR VIDÉO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR

 !"#$%&'(&)
INSTRUCTIONS
TM-H1950CG
TM-H1750CG
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l’usage du client:
Enter ci-dessous le numéro de série qui est situé sur l’arrière du coffret.
Conserver cette inf

Streszczenie treści zawartej na stronie nr. 2

INSTRUCTIONS COLOR VIDEO MONITOR TM-H1950CG TM-H1750CG Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. LCT1025-002A-H(EN) 3 02.4.25, 1:31 PM ENGLISH

Streszczenie treści zawartej na stronie nr. 3

SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation FCC INFORMATION (U.S.A. only) or mishandling the monitor, be fully aware of all the following CAUTION: Changes or modification not approved by precautions. JVC could void the user's authority to operate the equipment. WARNINGS To prevent fire or shock hazard, do not expose this NOTE: This equipment has been tested and found to monitor to rain or moisture. Dangerous high voltages comply with the limits for a Class B

Streszczenie treści zawartej na stronie nr. 4

POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. Power cord Power supply voltage : AC 120 V AC 230 V AC 230 V Countries : U.S.A. and Canada European countries United Kingdom Warning: ● Do not use the same Pow

Streszczenie treści zawartej na stronie nr. 5

CONTROLS AND FEATURES FRONT VIEW 1 UNDER COLOR BLUE POWER CHROMA CONTRAST VOLUME/SELECT MENU SCAN OFF CHECK ASPECT AB CD SLOT 15 PHASE BRIGHT INPUT SELECT 2 3 4 56 7 8 9 10 11 12 13 14 UNDER COLOR BLUE POWER CHROMA CONTRAST VOLUME/SELECT MENU SCAN OFF CHECK ASPECT AB CD SLOT PHASE BRIGHT INPUT SELECT TM-H1950CG (Front view of TM-H1950CG shown) 1 Tally lamp 8 Blue Check button [BLUE CHECK] Lights when the tally control signal is ON. The tally control Cuts red and green signal co

Streszczenie treści zawartej na stronie nr. 6

REAR VIEW VIDEO A 18 16 IN OUT REMOTE VIDEO B 17 19 IN OUT VIDEO A IN OUT VIDEO B IN OUT IN Y/C OUT IN AUDIO A Y/C IN OUT 20 AUDIO B IN OUT OUT AUDIO A (Rear view of TM-H1950CG shown) 21 OUT IN AUDIO B 20 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT] 22 OUT IN Y/C (S-video) signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. (The input signal is automatically terminated if a cable is not connected to the OUT terminal.) Input card slot (SLOT) 16 IN :

Streszczenie treści zawartej na stronie nr. 7

CONTROLS AND FEATURES (cont’d) REAR VIEW 25 To AC outlet REMOTE (120 V AC, For U.S.A. and Canada 50 Hz/60 Hz) VIDEO A IN OUT To AC outlet VIDEO B IN OUT (230 V AC, IN Y/C 25 OUT 50 Hz/60 Hz) AUDIO A IN OUT AUDIO B IN OUT For Europe 25 (Rear view of TM-H1950CG shown) 24 23 For the United Kingdom Main power switch 23 25 Power cord Press the switch to turn the main power ON or OFF. When Connects the provided power cord (120 V AC or 230 V AC, 50 Hz/60 Hz) to the AC IN connector r. the m

Streszczenie treści zawartej na stronie nr. 8

CONTROLS AND FEATURES (INPUT CARD: OPTIONAL)  COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) 1 Video input/output terminals Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. G/Y The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the IN OUT input signal is automatically terminated.) B/PB/B-Y Select component signal : press INPUT SELECT C button 1 Select RGB signal : press INPUT SELECT D button IN OUT R/PR/B-Y Synch

Streszczenie treści zawartej na stronie nr. 9

PREPARATION  INSTALLING THE INPUT CARD 1. Turn off the Color Video Monitor’s main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. Rear side of the TM-H1950CG color video monitor REMOTE Slot cover VIDEO A IN OUT VIDEO B IN OUT IN Y/C 3. Insert the Input Card’s board (green-colored) into the slot, fitting the board into the guide rails on the top and bot

Streszczenie treści zawartej na stronie nr. 10

 ATTACHING THE POWER CORD HOLDER The provided Power Cord Holder prevents the AC power cord from being accidentally disconnected from the AC inlet. The Power Cord Holder consists of two parts; a case and cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). Caution: Use only the provided screws. 2. Attach the Power Cord Holder cover to the AC power cord. Press the cover until it clicks. 3. Connect the AC power cord to the AC inlet, and j

Streszczenie treści zawartej na stronie nr. 11

HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION STATUS indication (PAL or NTSC) 1. Press the main power switch to turn on the power. 2. Press the POWER switch to turn on the power. PAL ON : Power turns ON. (Power indicator: lit) POWER Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode). OFF : Power turns OFF. (Power indicator: unlit) Orange : The main power is ON, but the monitor’s power is OFF (in the standby mode) Unlit : The main power is OFF. 3. Press th

Streszczenie treści zawartej na stronie nr. 12

VIDEO SIGNAL CONTROLS Use these buttons for video signal control.  UNDER SCAN Press the UNDER SCAN button to reduce the size of display area so that the whole picture is displayed on screen. Use to check the picture frame.  COLOR OFF To display a black and white picture, press the COLOR OFF button to input the luminance signal only. Use to check noise in the luminance signal or for white balance adjustment. Note: ● No effect with RGB input.  BLUE CHECK Input the standard color-bar signal fo

Streszczenie treści zawartej na stronie nr. 13

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE

SCREEN MODE (SETTING) screen You can set the following menu items. Set them depending on your needs. 1 < MENU > 4 APERTURE : 00 • APERTURE • COLOR SYSTEM ADJ. BAR POSI. : LOWER • ADJ. BAR POSI. • COMPO. LEVEL* COLOR TEMP. : 6500 COLOR SYSTEM : AUTO • COLOR TEMP. • RUSH DELAY COMP. LEVEL : 00 RUSH DELAY : STD. 1. Press the MENU button. 2 3 MENU The screen is displayed. EXIT 4 * The on-screen disp

Streszczenie treści zawartej na stronie nr. 14

DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. • PICTURE SUB ADJ. • WHITE BALANCE • REMOTE SYSTEM 1 4 PICTURE SUB ADJ. • H. POSITION • CONTROL LOCK • INPUT REMOTE H. POSITION : 00 • V. POSITION • STATUS DISPLAY V. POSITION : 00 WHITE BALANCE Notes: CONTROL LOCK : OFF STATUS DISPLAY : ON ● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set REMOTE SYSTEM : MAKE INPUT REMOTE : A – D

Streszczenie treści zawartej na stronie nr. 15

HOW TO USE THE MENU FUNCTIONS (cont’d) Set-up menu items Purpose Settings PICTURE SUB ADJ. Image sub adjustment Selects CONTRAST/BRIGHT/CHROMA/PHASE. The selected setting screen is shown. Select the function display for adjustment. + + + –10 –9 –01 00 01 • • 09 10 • • CONTRAST Adjusts contrast. + + + –10 –9 –01 00 01 • • 09 10 BRIGHT Adjusts brightness. • • –10 –9 –01 00 +01 • • +09 +10 C

Streszczenie treści zawartej na stronie nr. 16

HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set

and screen items, picture adjustment items and RESET screen the volume level to their factory-set (initial) values. RESET Are you sure ? 1. Press the Power ( ) switch to turn the power “Yes” then <+> “No” then OFF (activate the standby mode). POWER 2. While pressing both MENU button and CHROMA/ Initial settings PHA

Streszczenie treści zawartej na stronie nr. 17

BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected. • If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to con

Streszczenie treści zawartej na stronie nr. 18

 VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) VIDEO A IN OUT VIDEO B Video Camera IN OUT Y/C (S-video) VCR (Y/C (S-video) signal cable) IN Y/C Video Monitor Y/C (S-video) (Y/C (S-video) signal cable) OUT AUDIO A IN OUT Video Monitor VCR AUDIO B Audio Audio (Audio signal cable) (Audio signal cable) IN OUT : Signal Flow 17 LCT1025-002A-H(EN) 19 02.4.25, 1:31 PM ENGLISH

Streszczenie treści zawartej na stronie nr. 19

HOW TO USE EXTERNAL CONTROL  ABOUT EXTERNAL CONTROL This monitor is provided with an external control terminal. MAKE (make contact) or TRIG. (trigger) system can be selected by the setting of REMOTE SYSTEM in the . MAKE (make contact system) : The functino is controlled by short-circuiting or disconnecting each control terminal with pin 15 (GND). TRG. (trigger system) : The function is controlled by short-circuiting with pulses (for about 1 second) (short-circuit/open with the 15

Streszczenie treści zawartej na stronie nr. 20

TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. Is the main power turned OFF? Turn the main power ON. (See page 6.) No picture with the Is the video signal output from th