Streszczenie treści zawartej na stronie nr. 1
B410024 / 02
November 2002
© 2002 BARCO NV. All rights reserved
MFGD 3220 D
BarcoView
Theodoor Sevenslaan 106
8500 Kortrijk, Belgium
Phone: +32(0)56 23 32 44
Fax: +32(0)56 23 33 74
E-mail: sales.medical@barco.com
http://www.barcoview.com
BarcoView Inc
3059 Premiere Parkway
Duluth, Georgia, 30097,USA
Phone: +1 678 475 8000
Fax: +1 678 475 8100
User Manual
E-mail: sales.medical@barco.com
http://www.barcoview.com
BarcoView LTD
16F-1, Cheng Loong Plaza 33, Min Sheng Road
Section 1, Pan Chiao, Taipe
Streszczenie treści zawartej na stronie nr. 2
SAFETY INSTRUCTIONS Operation of this equipment • Read the safety and Water and moisture operating instructions before in a residential area is likely Never expose the to cause harmful operating the apparatus. apparatus to rain or moisture. Retain safety and operating interference in which case Never use the apparatus instructions for future the user will be required to near water - e.g. near a correct the interference at reference. bathtub, washbasin, Adhere to all warnings on his own e
Streszczenie treści zawartej na stronie nr. 3
MFGD 3220D User's Guide 4
Streszczenie treści zawartej na stronie nr. 4
CONTENTS 1. Overview ......................................................................................................... 7 1.1 Introduction ............................................................................................... 7 1.2 Package contents ..................................................................................... 8 1.3 Controls and connectors ........................................................................... 8 2. Installation .........................
Streszczenie treści zawartej na stronie nr. 5
MFGD 3220D User's Guide 6
Streszczenie treści zawartej na stronie nr. 6
1. OVERVIEW 1.1 Introduction The MFGD 3220D, BARCO’s 21” 3 megapixel greyscale LCD display, guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality. It is designed to meet the users' needs for performance, consistency, and outstanding image quality through a streamlined development process. The display can be used in portrait or l
Streszczenie treści zawartej na stronie nr. 7
1.2 Package contents The package should include the following items, please check. If some of the items are missing, please contact the reseller you have purchased the unit from. - The MFGD 3220D display - 12V DC power supply - European power cord - American power cord - Video cable - This user manual 1.3 Controls and connectors (2) (3) (1) (4) (5) (6) MFGD 3220D User's Guide 8
Streszczenie treści zawartej na stronie nr. 8
(1) Power LED - The LED is off when the display is off. - The LED is green when the display is on. Note: This function can be switched off by software. - The LED is blinking green when the display is in Suspend power-saving mode. - The LED is orange when the display is in Stand-by power-saving mode. (2) Control wheel for stand-by switching and luminance control (3) USB-downstream connector (4) USB-upstream connector (5) DVI (video and data) input (6) 12V DC power input MFGD 3220D User's Guide 9
Streszczenie treści zawartej na stronie nr. 9
2. INSTALLATION 2.1 Precautions Keep your original packaging. It is designed for this display and is the ideal protection during transport. Avoid reflections in the flat panel to reduce eye strain. Place the display on a strong and stable table or desk. Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console. Make sure the computer is switched off before connecting the signals. Do not block or cover the openings in the external
Streszczenie treści zawartej na stronie nr. 10
4 Pull the red strap out of the fixation holes in the foot. You can better leave the cover off the foot while connecting the signal cables to the display. 2.3 Portrait or landscape position You can change the orientation of the panel at any time, but it is more convenient to select landscape or portrait orientation before connecting the cables. To change the panel orientation: 1 Stand at the front side of the panel and take the panel at both sides. 2 Very important: Tilt the panel before changin
Streszczenie treści zawartej na stronie nr. 11
2.4 Connecting the signals To get access to the connectors, open the cover of the connector compartment by pulling down the 2 clips of the cover. To connect the video & sync signals: 1 Connect one end of the video cable to the DVI input (5) of the display. 2 Connect the other end of the video cable to the video output of your video source (Computer graphics board with digital video output). 3 Route the cable so that it enters the connector compartment at the place where the cover is bulged. Vid1
Streszczenie treści zawartej na stronie nr. 12
3 Connect the other end of the power cord to a grounded power outlet. 2.5. Routing the signal cables After connecting all cables, fix them in the cable tie at the rear of the connector compartment. You can also bind the cables together by means of the 2 velcro strips included in the package. After fixing the cables, put the connector compartment cover back in place. Pay attention that the signal cables are positioned under the bulge in the cover. Next, fix the cables in the plastic clamps on the
Streszczenie treści zawartej na stronie nr. 13
2.6 Tilt and swivel positioning Adjust the position of the panel for best viewing conditions. The display foot allows adjusting the panel height, horizontal viewing angle and vertical viewing angle. 2.7 Starting up Proceed as follows: 1 Switch on the computer. 2 If necessary, select a suitable resolution in the computer operating system. You will have to select a resolution that corresponds to the panel orientation (landscape or portrait). Please refer to the possible resolutions in the Techni
Streszczenie treści zawartej na stronie nr. 14
3. CONTROLS The control wheel (2) at the bottom (landscape orientation) or at the side (portrait orientation) allows you to perform some controls. You can switch the display in stand-by and control the brightness. 3.1 Stand-by switching When the display is on, depress the control wheel slightly to switch the display in stand-by. When the display is in stand-by, depress the control wheel slightly to turn it back on. 3.2 Brightness control Turn the control wheel (2) clockwise to increase the brigh
Streszczenie treści zawartej na stronie nr. 15
4. MAINTENANCE Panel Take care not to damage or scratch the panel. Clean with a soft woolen or cotton towel. Use a watery solution or a mild commercial glass cleaning product. Cabinet Do not use chemical cleaning products, benzene, toluene, xylene or other solvents. Clean with a soft cloth dampened with mild detergent and water. Repeat with water only and wipe dry with a dry cloth. Removing dust from the rear of the glass panel It may be possible that dust particles have entered the display and
Streszczenie treści zawartej na stronie nr. 16
5. TROUBLESHOOTING Pixel Faults Permanently dark or bright pixels can happen to TFT displays. 20 or less permanently dead pixels do not make out a good case for exchanging the unit. Please contact our Customer Service Department if the number of pixel faults exceeds the above- mentioned figure.
Streszczenie treści zawartej na stronie nr. 17
6. TECHNICAL SPECIFICATIONS Picture panel 20.8-inch diagonal viewable screen TFT (thin film transistor) active matrix, greyscale liquid crystal display Resolution Native: 2048 x 1536 Display area (H x V) 423.7 x 318 (mm) Viewing angle (@ 10/1 contrast) Vertical: 170º Horizontal: 170º Input signals Possible resolutions: 640 x 350 @ 85 Hz 720 x 400 @ 75 Hz 1536 x 2048 @ 60 Hz 2048 x 1536 @ 60 Hz Video: Complying to DVI Rev 1.0 specifications Sync: Complying to DVI Rev 1.0
Streszczenie treści zawartej na stronie nr. 18
Input connectors DVI dual channel Power source Input for 12 VDC power supply unit: 90 ~ 264 VAC Input for display: 12 VDC. (The supplied 12VDC power supply must be used) Power consumption 100 watts (max.) Safety standards CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 950-95 (cUL) Dimensions (W x H x D) In perpendicular vertical position, highest position, tilt = 0°, swivel = 0°: 385 x 590 x 240 mm Net weight 13 kg Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C NOTICE: DUE TO OU
Streszczenie treści zawartej na stronie nr. 19
