Instrukcja obsługi Audiovox P-153

Streszczenie treści zawartej na stronie nr. 1

INSTALLATION MANUAL
P-153
AM/FM/MPX RADIO
WITH FOLD-DOWN DETACHABLE FRONT PANEL,
COMPACT DISC PLAYER, AUDIO CASSETTE PLAYER,
CD CHANGER CONTROLS
AND QUARTZ CLOCK

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION INSTRUCTIONS This unit is designed for installation in GM and Chrysler cars, trucks, and vans with a 1-1/2 DIN radio opening. In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line

Streszczenie treści zawartej na stronie nr. 3

WIRING COLOR CODES FUNCTION COLOR + 12 V Acc/Ignition Red + 12 V Battery/Memory Yellow Ground Black Dimmer Orange Cellular Mute Pink LF + Speaker White LF - Speaker White/Black LR + Speaker Green LR - Speaker Green/Black RF + Speaker Gray RF - Speaker Gray/Black RR + Speaker Violet RR - Speaker Violet/Black TYPICAL GM APPLICATION (See Figure 1.) Radio Preparation: NOTE: For GM car installations, use the GM Hardware Kit, Part Number 150-1335, which is furnished with the radio. 1. Match quickie

Streszczenie treści zawartej na stronie nr. 4

WIRING DIAGRAM-TYPICAL INSTALLATION FOR GM (Figure 1) -4- REAR VIEW VEHICLE DASH NOTE: GM VEHICLES 1992 AND UP WILL REQUIRE AN ANTENNA ADAPTER CABLE TO CONVERT CD CHANGER THE VEHICLE SIDE MINI CONNECTOR CONNECTOR TO A STANDARD CONNECTOR RCA CABLES 12 PIN PWR/SPKR GM MINI- BARBLESS CONNECTOR OR ANTENNA CABLE ANTENNA SOCKET REAR LONG BUSHING QUICKIE BOLT ITEM #5 ITEM #3 FLANGE NUT ITEM #4 SPLICE WIRES FACTORY BRACKET VEHICLE OUTER DASH TRIM VEHICLE SIDE P-153 RADIO BRACKETS RADIO HARNESS ITEM #

Streszczenie treści zawartej na stronie nr. 5

TYPICAL CHRYSLER APPLICATION (See Figure 2.) Radio Preparation: NOTE: For Chrysler car installations, use the Chrysler Hardware Kit, Part Number 150-1336, which is furnished with the radio. 1. Select two of the four mounting tabs provided and match the radio mounting style of the vehicle as shown in Figures 3, 4 and 5. NOTE: The tab number is stamped on the bottom of the tab. 2. Attach the mounting tabs to the radio chassis with the four 1/4” hex head screws provided (Item # 9). 3. Attach the 2

Streszczenie treści zawartej na stronie nr. 6

TYPICAL INSTALLATION FOR CHRYSLER (Figure 2) -6- EXISTING MOUNTING HARDWARE OR 10 mm SCREWS ANTENNA CABLE REAR VIEW VEHICLE DASH CD CHANGER CONNECTOR FLANGE NUT RCA ITEM #4 CABLES (supplied) 12 PIN PWR/SPKR VEHICLE SIDE CONNECTOR GROUNDING STRAP OR ANTENNA SOCKET REAR QUICKIE BOLT BUSHING ITEM #3 ITEM #5 SPLICE WIRES VEHICLE SIDE RADIO HARNESS P-153 RADIO CHRYSLER WIRING HARNESS ADAPTER VEHICLE (PURCHASED SEPARATELY) P-153 OUTER DASH TRIM WIRING HARNESS CHRYSLER APPLICATION MOUNTING TAB AND

Streszczenie treści zawartej na stronie nr. 7

TAB #2 Figure 3 TAB #1 TAB #2 TAB #4 Figure 4 TAB #3 Figure 5 TAB #2 -7-

Streszczenie treści zawartej na stronie nr. 8

© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788 128-5844B