Streszczenie treści zawartej na stronie nr. 1
English Français Español
CD RECEIVER
AUTORADIO CD
REPRODUCTOR DE CD
DEH-P710BT
Installation Manual
Manuel d’installation
Manual de instalación
<0G020184B> <1>
Streszczenie treści zawartej na stronie nr. 2
T T R R A A T T S S N N O O C Contents Connecting the units Connecting the units ............................ 2 Note Connecting the power cord ............................... 4 When using a subwoofer • When this unit is installed in a vehicle without ACC (accessory) position on the ignition switch, without using the optional amplifier ........ 6 red cable must be wired to the terminal that can When connecting to detect the operation of the ignition key. Otherwise, separately sold po
Streszczenie treści zawartej na stronie nr. 3
English Connecting the units • Control signal is output through blue/white cable when this unit is powered on. Connect it to an external power amp’s system remote control or the vehicle’s auto-antenna relay control terminal (max. 300 mA, 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. • Never connect blue/white cable to external power amp’s power terminal. Also, never connect it to the power terminal of the auto antenna.
Streszczenie treści zawartej na stronie nr. 4
Connecting the units Connecting the units Connecting the power cord USB cable USB1/USB2 input jack Use supplied USB cable or separately sold USB cable (CD-U150E). 1.5 m (4 ft. 9 in.) 20 cm iPod to USB connection cable (7-7/8 in.) Use supplied iPod to USB connection 0.5 m (1 ft. 8 in.) cable. AUX jack (3.5 φ) Use a stereo mini plug cable This product Rear output to connect with auxiliary device. 15 cm (5-7/8 in.) Front output Wired remote input Hard-wired remote control Microphone input ada
Streszczenie treści zawartej na stronie nr. 5
English Connecting the units Connecting the units Connecting the power cord USB cable USB1/USB2 input jack Use supplied USB cable or separately sold USB cable (CD-U150E). 1.5 m (4 ft. 9 in.) 20 cm iPod to USB connection cable (7-7/8 in.) Use supplied iPod to USB connection 0.5 m (1 ft. 8 in.) cable. AUX jack (3.5 φ) Use a stereo mini plug cable This product Rear output to connect with auxiliary device. 15 cm (5-7/8 in.) Front output Wired remote input Hard-wired remote control Microphone in
Streszczenie treści zawartej na stronie nr. 6
Connecting the units Connecting the units When using a subwoofer without using the optional amplifier USB1/USB2 input jack 20 cm (7-7/8 in.) USB cable AUX jack (3.5 φ) Use supplied USB cable or separately 1.5 m (4 ft. 9 in.) Use a stereo mini plug cable sold USB cable (CD-U150E). This product Rear output to connect with auxiliary iPod to USB connection cable device. Use supplied iPod to USB connection 0.5 m (1 ft. 8 in.) Front output cable. Wired remote input 15 cm Hard-wired remote control
Streszczenie treści zawartej na stronie nr. 7
English Connecting the units Connecting the units When using a subwoofer without using the optional amplifier USB1/USB2 input jack 20 cm (7-7/8 in.) USB cable AUX jack (3.5 φ) Use supplied USB cable or separately 1.5 m (4 ft. 9 in.) Use a stereo mini plug cable sold USB cable (CD-U150E). This product Rear output to connect with auxiliary iPod to USB connection cable device. Use supplied iPod to USB connection 0.5 m (1 ft. 8 in.) Front output cable. Wired remote input 15 cm Hard-wired remote
Streszczenie treści zawartej na stronie nr. 8
Connecting the units Connecting the units When connecting to separately sold power amp Power amp (sold separately) AUX jack (3.5 φ) To rear output This product Use a stereo mini plug cable Rear output to connect with auxiliary Power amp device. (sold separately) To front output Front output Wired remote input Power amp Hard-wired remote control (sold separately) adaptor can be connected Subwoofer output To subwoofer output (sold separately). IP-BUS input (Blue) Antenna jack Connect with RC
Streszczenie treści zawartej na stronie nr. 9
English Connecting the units Connecting the units When connecting to separately sold power amp Power amp (sold separately) AUX jack (3.5 φ) To rear output This product Use a stereo mini plug cable Rear output to connect with auxiliary Power amp device. (sold separately) To front output Front output Wired remote input Power amp Hard-wired remote control (sold separately) adaptor can be connected Subwoofer output To subwoofer output (sold separately). IP-BUS input (Blue) Antenna jack Connect
Streszczenie treści zawartej na stronie nr. 10
Connecting the units Connecting the units When connecting speakers without using the internal amplifier • If using this system, we recommend that this unit’s internal amp is turned off. For more details, refer to operation manual. Power amp (sold separately) To rear output Connect with RCA cables This product (sold separately) Rear output Power amp (sold separately) Front output To front output Power amp Antenna jack (sold separately) Subwoofer output To subwoofer output Fuse (10 A) Yel
Streszczenie treści zawartej na stronie nr. 11
English Connecting the units Connecting the units When connecting speakers without using the internal amplifier • If using this system, we recommend that this unit’s internal amp is turned off. For more details, refer to operation manual. Power amp (sold separately) To rear output Connect with RCA cables This product (sold separately) Rear output Power amp (sold separately) Front output To front output Power amp Antenna jack (sold separately) Subwoofer output To subwoofer output Fuse (1
Streszczenie treści zawartej na stronie nr. 12
Installation • The cords must not cover up the area shown in the Note figure. This is necessary to allow the amplifiers to radiate freely. • Check all connections and systems before final installation. Do not cover this area. • Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. • Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. • Do not install this unit where: — it may interfere with operation of
Streszczenie treści zawartej na stronie nr. 13
English Installation DIN Front-mount Removing the Unit 1. Insert the supplied extraction keys Installation with metal strap and into both sides of the unit until they screws click into place. 1. Insert the mounting sleeve into the 2. Pull the unit out of the dashboard. dashboard. • When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve. 2. Secure the mounting sleeve by using a screwdriver to bend t
Streszczenie treści zawartej na stronie nr. 14
Installation Fastening the front panel Installing the microphone If you do not plan to detach the front panel, Install the microphone in a position and the front panel can be fastened with supplied orientation that will enable it to pick up the screws and holders. voice of the person operating the system. 1. Attach the holders to both sides of the CAUTION front panel. Holder • It is extremely dangerous to allow the microphone lead to become wound around the steering column or gearstick. Be
Streszczenie treści zawartej na stronie nr. 15
English Installation When installing the microphone Installing the steering remote control on the steering column 1. Install the microphone on the microphone clip. WARNING Microphone • Avoid installing this unit in such a location where the operation of safety devices such as airbags is prevented by this unit. Otherwise, there is a Microphone base Fit the microphone danger of a fatal accident. lead into the groove • Avoid installing this unit in such a location where Microphone clip the
Streszczenie treści zawartej na stronie nr. 16
Installation 3. Cut off the extra portion of the belt. 4 Note • Do not install this unit in such a place as may obstruct the driver’s view. • Since interior layout differs depending on the type of vehicle, the ideal installation location for the unit also differs. When installing the unit, select a location that assures optimum transmission of signals from the unit to the car stereo. Installing the unit on a left-hand • 5 If some of the belt still protrudes, fold it back drive car into
Streszczenie treści zawartej na stronie nr. 17
English 1 <0G020184B> <1>
Streszczenie treści zawartej na stronie nr. 18
T T R R A A T T S S N N O O C Table des matières Connexions des appareils Connexions des appareils ................... 2 Remarque Branchement du cordon d’alimentation ....... 4 Lors de l’utilisation d’un caisson de • Si cet appareil est installé dans un véhicule sans position ACC (accessoire) sur le commutateur grave sans utiliser l’amplificateur d’allumage, le câble rouge doit être connecté en option ..................................................... 6 à une borne qui peut détecter
Streszczenie treści zawartej na stronie nr. 19
Français Connexions des appareils • Le signal de commande est sorti par le câble bleu/blanc quand cet appareil est sous tension. Connectez-le à la télécommande d’un système d’amplification extérieur ou à la prise de commande du contrôle de relais de l’antenne automatique (max. 300 mA, 12 V CC). Si la véhicule est équipée d’une antenne de vitre, connectez-la à la prise d’alimentation de l’amplificateur d’antenne. • Ne connectez jamais le câble bleu/blanc à la prise d’alimentation d’un am
Streszczenie treści zawartej na stronie nr. 20
Connexions des appareils Connexions des appareils Branchement du cordon d’alimentation Câble USB Prise d’entrée USB1/USB2 Utiliser le câble USB fourni ou le câble USB vendu séparément (CD-U150E). 1,5 m 20 cm Câble de connexion iPod à USB Utiliser le câble de connexion iPod à 0,5 m USB fourni. Prise AUX (3,5 φ) Utilisez un câble à mini fiche Cet appareil Sortie arrière stéréo pour connecter un appareil auxiliaire. 15 cm Sortie avant Entrée de télécommande à fil Vous pouvez connecter un Entr
